The 10th generation CPU supports win7 system. Win7 can be installed on 400 and 500 series motherboards with 10th generation CPUs. The prerequisite for installation is to turn off "Safe Boot" and enable csm compatibility mode if there is a dedicated graphics card; however, some motherboards no longer have options to support traditional mode and compatibility mode. , the motherboard still needs to be replaced at this time.
The operating environment of this tutorial: Windows 7 system, Dell G3 computer.
400 and 500 series motherboards with 10th generation CPUs can be installed with win7, but USB devices cannot be used during the installation of WIN7. You need to use a new win7 model for installation, and turn off the "Safe Boot" option. If For solid-state drives with NVME interface, a 0x000007b hard drive not found blue screen will appear during the installation of WIN7.
The prerequisite for installing Win7 on 10th generation CPU is to turn off "Safe Boot" and turn on CSM compatibility mode if there is a dedicated graphics card. However, some motherboards no longer have options to support traditional mode and compatibility mode, so the motherboard still needs to be replaced.
The 10th generation CPU paired with the 500 series motherboard needs to be installed with a separate graphics card to install win7. Currently, the 500 series motherboard does not support the integrated graphics driver. Currently, the ones that support win7 integrated graphics are: i3 10100, i3 10105 and some i5 10400 CPUs (CPUs above 10400 need to be equipped with independent graphics cards to install win7). Machines that support integrated graphics can only use 400 series motherboards in advance, and all 500 series motherboards require independent graphics cards.
Even if the above conditions are met, another important point is that due to limitations of Intel, some brand machines will have a 0x000000a5 blue screen when installing win7 due to BIOS limitations. If a 0x000000a5 blue screen appears It must be impossible to install win7. This happened a lot in the Intel 8th generation.
Notes on installing win7 with 10th generation CPU:
1. Machines with 10th generation CPU do not support traditional mode. Win7 can only be installed in uefi mode. Note that compatibility mode cannot be turned on in uefi mode. There is no option to turn it on, so when installing win7, you need to use the image that comes with this site and the solution card LOGO solution. Otherwise, when installing win7, you will be stuck in the startup menu and cannot enter the system. If you have a separate graphics card, remember to turn on the csm compatibility mode first to install WIN7. If the uefi mode does not have a csm compatibility mode, then use the solution to solve the card LOGO.
2. When installing win7 on machines with 10th generation CPU, you need to pay attention to "turn off security enablement" in the bios.
3. When installing win7 in uefi mode on machines with 10th generation CPU, please note that only 64-bit operating systems can be used. When installing win7 in uefi mode, the partition type must be gpt partition.
4. When installing the system, the drive letter of the system cannot have files in it. If there are files, you cannot click Next to continue and you need to format the partition.
5. The entire installation process requires 2 restarts.
6. After the installation is completed, almost all hardware drivers can be obtained through Windows Update, and they can be put into use immediately after the update.
For more related knowledge, please visit theFAQcolumn!
The above is the detailed content of Does 10th generation CPU support win7 system?. For more information, please follow other related articles on the PHP Chinese website!