Is it enough to install a mechanical hard drive on the computer and plug it in directly?
Is it enough to install a mechanical hard drive on the computer and plug it in directly? Okay, the power interface and data interface SATA must be connected, and the hard disk needs to be fixed, otherwise the magnetic head will be easily damaged if it falls.
The specific installation method is as follows:
1. Hold the new hard drive in your hand and look carefully at the back of the hard drive, between the data cable socket and the power cable socket. There are two rows of pins, and there are two small square things inserted on the two pins, which are jumper caps. Its function is to connect the two pins. The jumper cap can be pulled out, it's best to use tweezers so that you don't bend other pins. After the jumper cap is pulled out, it can be plugged into any two pins, which creates different combinations.
2. Generally, the combination diagram of the jumper cap will be printed on the back of the hard disk or on the top cover. Master means the main disk, and Slave means the slave disk. You can set the hard disk to be the master disk or the slave disk according to the combination.
3. Generally, the jumper of the hard disk is set to the master disk by default. Take a look at the settings of the old hard disk. If it is the master disk, set the new hard disk to the slave disk as shown in the figure. It must be set as master and slave disk before it can be used.
4. Install the new hard drive into the chassis and secure it. Find an extra power supply and plug it in. There is an interface in the middle of the original data cable that can plug in the new hard drive. That is, a data cable. Up to two hard drives can be connected.
Recommended tutorial: windows tutorial
The above is the detailed content of Is it enough to install a mechanical hard drive in the computer and plug it in directly?. For more information, please follow other related articles on the PHP Chinese website!