centos7系统重启网卡失败

问题：

执行service network restart命令后出现下面的错误：

Restarting network (via systemctl): Job for network.service failed because the control process exited with error code.

See "systemctl status network.service" and "journalctl -xe" for details. [失败]

（推荐教程：centos使用教程）

解决方法：

1、.和 NetworkManager 服务有冲突，直接关闭 NetworkManger 服务就好了， service NetworkManager stop，并且禁止开机启动 chkconfig NetworkManager off 。之后重启就好了。

2、和配置文件的MAC地址不匹配，这个也好解决，使用ip addr（或ifconfig）查看mac地址

[root@royfans royfans]# ip a
1: lo:  mtu 65536 qdisc noqueue state UNKNOWN qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: ens33:  mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 00:0c:29:5f:9e:1d brd ff:ff:ff:ff:ff:ff
3: virbr0:  mtu 1500 qdisc noqueue state DOWN qlen 1000
link/ether 52:54:00:67:8e:c3 brd ff:ff:ff:ff:ff:ff
inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
valid_lft forever preferred_lft forever
4: virbr0-nic:  mtu 1500 qdisc pfifo_fast master virbr0 state DOWN qlen 1000
link/ether 52:54:00:67:8e:c3 brd ff:ff:ff:ff:ff:ff

00:0c:29:5f:9e:1d这个就是MAC地址了，将/etc/sysconfig/network-scripts/ifcfg-xxx中的HWADDR（如果没有就添加上）改成这个MAC地址。

3、设定开机启动一个名为NetworkManager-wait-online服务，命令为：

systemctl enable NetworkManager-wait-online.service

4、查看/etc/sysconfig/network-scripts下，将其余无关的网卡位置文件全删掉，避免不必要的影响，即只留一个以ifcfg开头的文件

5、将ifcfg-xxx文件中的DEVICE一行注释掉。

6、将ifcfg-xxx中的NAME改为和文件名一致。

相关视频教程分享：linux视频教程

위 내용은 centos7系统重启网卡失败의 상세 내용입니다. 자세한 내용은 PHP 중국어 웹사이트의 기타 관련 기사를 참조하세요!