À propos de l'utilisation des composants JS dans les composants Gojs-js tutoriel-php.cn

Cet article présente principalement les composants Gojs, un outil puissant pour les plug-ins graphiques front-end. Il a une certaine valeur de référence. Les amis intéressés peuvent s'y référer

Avant-propos : j'ai déjà partagé deux articles concernant le. composant frontal du dessin de processus, jsPlumb est utilisé. Ce composant en lui-même n'est pas mauvais. Il est facile à utiliser, facile à démarrer et léger. Cependant, après l'avoir utilisé pendant un certain temps, j'ai trouvé quelques défauts. Par exemple, le composant n'est pas stable lorsque vous entrez pour la première fois. la page, le style de connexion est parfois foiré. Vous devez actualiser la page avant de pouvoir l'utiliser. Revenez à la normale, et le style de câblage est relativement simple, ce qui peut facilement provoquer une fatigue visuelle. a promu ce que l'on appelle "l'Industrie 4.0". En plus des exigences accrues en matière de contrôle d'automatisation, les exigences relatives à cette interface graphique ont également augmenté. Par conséquent, l'effet du simple composant jsPlumb ne peut plus satisfaire les activités en pleine croissance de l'entreprise. Sur la base de ce qui précède, j'ai finalement trouvé le composant Gojs, qui a des effets puissants et des API riches. Le seul inconvénient est que ce composant est un composant payant, mais en Chine, chut... c'est un secret qui ne peut être révélé !

Adresse originale de cet article : http://www.cnblogs.com/landeanfen/p/7910530.html

1. Aperçu de l'effet de composant

Commençons par deux effets sympas

Quant aux deux effets du bas, qui ne peuvent pas être obtenu par jsPlumb, mais cet effet est très attrayant dans les systèmes MES, en particulier pour certaines entreprises orientées processus. L'utilisation de cet effet peut vous faire sentir grand en un coup d'œil. Et à première vue, on ne croit pas que ce soit l’effet d’une page web.

Autres exemples d'effets

Arbre pliable

Est-ce une photo ?

Peut même générer des graphiques !

Vous voulez décrocher le poste de Visio ?

Pour plus d'exemples, veuillez consulter le site officiel

2. Pour le premier contact

les anciennes règles sont, prenons d'abord un tutoriel d'introduction.

Téléchargement du code source : https://github.com/NorthwoodsSoftware/GoJS

Détails de l'API : https://gojs.net/latest/api/index.html

Exemple d'adresse : https://gojs.net/latest/samples/index.html

1 Introduction à Gojs

GoJS est. une fonction Une riche bibliothèque JS peut réaliser des diagrammes interactifs personnalisés et des effets de visualisation complexes sur les navigateurs et les plates-formes Web. Elle utilise des modèles personnalisés et des composants de mise en page pour simplifier les diagrammes JS complexes tels que les nœuds, les liens et les groupes, offrant ainsi une interaction utilisateur avec de nombreuses fonctionnalités avancées telles que glisser-déposer, copier, coller, édition de texte, info-bulles, menu contextuel, mise en page automatique, modèles, liaison de données et modèles, gestion de l'état et de l'annulation des transactions, palette de couleurs, présentation, gestionnaires d'événements, commandes et système d'outils étendu pour les opérations personnalisées. . GoJS permet l'interaction de l'utilisateur et s'exécute entièrement dans le navigateur, restituant les éléments HTML5 Canvas ou SVG sans avoir à changer de serveur ou de plugin, et sans requêtes côté serveur. GoJS ne dépend d'aucune bibliothèque ou framework JS (comme bootstrap, jquery, etc.) et peut fonctionner avec n'importe quel framework HTML ou JS, ou même sans framework.

2. Mise en route

(1) Référence du fichier

<script src="gojs/go-debug_ok.js"></script>

Copier après la connexion

Vous pouvez utiliser la dernière version sur cdn , Vous pouvez également référencer des fichiers téléchargés localement. S'il s'agit d'un développement, vous pouvez citer la version de débogage de js et citer le js officiel lors de son exécution officielle. Il n'est pas nécessaire d'en dire plus.

(2) Créer une toile

随便定义一个html元素，作为我们的画布

<p id="myDiagramp" style="margin:auto;width:300px; height:300px; background-color:#ddd;"></p>

Copier après la connexion

然后使用gojs的api初始化画布

//创建画布
  var objGo = go.GraphObject.make;
  var myDiagram = objGo(go.Diagram, "myDiagramp",
   {
    //模型图的中心位置所在坐标
    initialContentAlignment: go.Spot.Center,
    
    //允许用户操作图表的时候使用Ctrl-Z撤销和Ctrl-Y重做快捷键
    "undoManager.isEnabled": true,
    
    //不运行用户改变图表的规模
    allowZoom: false,

    //画布上面是否出现网格
    "grid.visible": true,

    //允许在画布上面双击的时候创建节点
    "clickCreatingTool.archetypeNodeData": { text: "Node" },

    //允许使用ctrl+c、ctrl+v复制粘贴
    "commandHandler.copiesTree": true, 

    //允许使用delete键删除节点
    "commandHandler.deletesTree": true, 

    // dragging for both move and copy
    "draggingTool.dragsTree": true, 
   });

Copier après la connexion

官方示例用的$符号作为变量，博主觉得$符号太敏感，还是换个名字吧~以上几个参数都是博主摘选的，更多初始化画布的参数请参考官方api下图：

（3）创建模型数据（Model）

接着上面的代码，我们增加如下几行

var myModel = objGo(go.Model);//创建Model对象
  // model中的数据每一个js对象都代表着一个相应的模型图中的元素
  myModel.nodeDataArray = [
   { key: "工厂" },
   { key: "车间" },
   { key: "工人" },
   { key: "岗位" },
  ];
  myDiagram.model = myModel; //将模型数据绑定到画布图上

Copier après la connexion

效果预览

（4）创建节点（Node）

上面有了画布和节点数据，只是有了一个雏形，但是还没有任何的图形化效果。我们加入一些效果试试

在gojs里面给我们提供了几种模型节点的可选项：

Shape:形状——Rectangle（矩形）、RoundedRectangle（圆角矩形），Ellipse（椭圆形），Triangle（三角形），Diamond（菱形），Circle（圆形）等
TextBlock:文本域（可编辑）
Picture:图片
Panel:容器来保存其他Node的集合
默认的节点模型代码只是由一个TextBlock组件构建成

我们增加如下一段代码

// 定义一个简单的节点模板
  myDiagram.nodeTemplate =
   objGo(go.Node, "Horizontal",//横向布局的面板
    // 节点淡蓝色背景
    { background: "#44CCFF" },
    objGo(go.Shape,
     "RoundedRectangle", //定义形状，这是圆角矩形
     { /* Shape的参数。宽高颜色等等*/figure: "Club", width: 40, height: 60, margin: 4, fill: &#39;red&#39; },
     // 绑定 Shape.figure属性为Node.data.fig的值，Model对象可以通过Node.data.fig 获取和设置Shape.figure（修改形状）
     new go.Binding("figure", "fig"), new go.Binding(&#39;fill&#39;, &#39;fill2&#39;)),
    objGo(go.TextBlock,
     "Default Text", // 默认文本
     // 设置字体大小颜色以及边距
     { margin: 12, stroke: "white", font: "bold 16px sans-serif" },
     //绑定TextBlock.text 属性为Node.data.name的值，Model对象可以通过Node.data.name获取和设置TextBlock.text
     new go.Binding("text", "name"))
   );

  var myModel = objGo(go.Model);//创建Model对象
  // model中的数据每一个js对象都代表着一个相应的模型图中的元素
  myModel.nodeDataArray = [
   { name: "工厂", fig: &#39;YinYang&#39;, fill2: &#39;blue&#39; },
   { name: "车间", fig: &#39;Peace&#39;, fill2: &#39;red&#39; },
   { name: "工人", fig: &#39;NotAllowed&#39;, fill2: &#39;green&#39; },
   { name: "岗位", fig: &#39;Fragile&#39;, fill2: &#39;yellow&#39; },
  ];
  myDiagram.model = myModel; //将模型数据绑定到画布图上

Copier après la connexion

代码释疑：以上我们给画布对象定义了两种节点模板，一种是文本节点，另一种是形状节点（Node）。在形状节点中，我们定义了数据模型的通用节点样式，就是这一段代码{ /* Shape的参数。宽高颜色等等*/figure: "Club", width: 40, height: 60, margin: 4, fill: 'red' },然后通过new go.Binding("figure", "fig")方法将模板里面的属性映射到数据实例中，比如这里模板里面的figure属性定义的是Club，如果在我们的数据里面定义fig属性，那么它就会覆盖模板里面的figure的默认值。同样，fill和fill2也是通过同样的原理去区别模板中的样式和实例中的实际样式的！

注：更多figure属性的取值详见这里

效果如下

由此可见我们数据里面的属性会覆盖模板的原始属性，如果是新增的节点，由于没有自定义数据属性，所以呈现到界面上面的时候就是模板里面的原生样式！

（5）节点连线

有了上面的基础，我们可以在画布上面画出我们想要的图形效果了，可是还没有连线。我们知道连线是建立在节点模型的上面的，于是乎我们的Model又分为了以下三种类型：

Model：最基本的（不带连线，如上面的例子）

GraphLinksModel ：高级点的动态连线图

TreeModel：树形图的模型（从例子看好像用的不多）

GraphLinksModel中为model.nodeDataArray提供model.linkDataArray为node节点连线保存数据模型信息，其实也是的一个JSON数组对象，每个线条都有两个属性 “to” 和 “from” 即Node节点的“key”值，两个属性代表两个key表示两个节点间的连线。

我们上面已经写过最基本的Model的例子了，我们再来个带连线的Model的示例

var myModel = objGo(go.GraphLinksModel);
  myModel.nodeDataArray =
   [
    { key: "aaa" ,name: "工厂" },
    { key: "bbb" ,name: "车间"},
    { key: "ccc" ,name: "车间" }
   ];
  myModel.linkDataArray =
   [
    { from: "aaa", to: "bbb" },
    { from: "bbb", to: "ccc" }
   ];
  myDiagram.model = myModel;

Copier après la connexion

效果如下

学习了Model、GraphLinksModel，还剩下一种TreeModel树节点的模型，这个博主不打算做详细介绍，有兴趣可以直接查看官网。

三、综合效果

关于综合效果，博主不打算将gojs的api逐个翻个遍了，这样太耗时间，伤不起，只是将官方示例中的部分源码截取出来供大家参考。有需要的再细究！

1、自定义流程的使用

<!DOCTYPE html>
<html>
<head>
<meta name="viewport" content="width=device-width, initial-scale=1">
<title>Draggable Link</title>
<meta name="description" content="Drag a link to reconnect it. Nodes have custom Adornments for selection, resizing, and reshaping." />
<!-- Copyright 1998-2017 by Northwoods Software Corporation. -->
<meta charset="UTF-8">
<script src="../../gojs/go-debug.js"></script>
<script id="code">
 function init() {
 if (window.goSamples) goSamples(); // init for these samples -- you don&#39;t need to call this
 var objGo = go.GraphObject.make; // for conciseness in defining templates

 myDiagram =
  objGo(go.Diagram, "myDiagramp", // must name or refer to the p HTML element
  {
   grid: objGo(go.Panel, "Grid",
     objGo(go.Shape, "LineH", { stroke: "lightgray", strokeWidth: 0.5 }),
     objGo(go.Shape, "LineH", { stroke: "gray", strokeWidth: 0.5, interval: 10 }),
     objGo(go.Shape, "LineV", { stroke: "lightgray", strokeWidth: 0.5 }),
     objGo(go.Shape, "LineV", { stroke: "gray", strokeWidth: 0.5, interval: 10 })
    ),
   allowDrop: true, // must be true to accept drops from the Palette
   "draggingTool.dragsLink": true,
   "draggingTool.isGridSnapEnabled": true,
   "linkingTool.isUnconnectedLinkValid": true,
   "linkingTool.portGravity": 20,
   "relinkingTool.isUnconnectedLinkValid": true,
   "relinkingTool.portGravity": 20,
   "relinkingTool.fromHandleArchetype":
   objGo(go.Shape, "Diamond", { segmentIndex: 0, cursor: "pointer", desiredSize: new go.Size(8, 8), fill: "tomato", stroke: "darkred" }),
   "relinkingTool.toHandleArchetype":
   objGo(go.Shape, "Diamond", { segmentIndex: -1, cursor: "pointer", desiredSize: new go.Size(8, 8), fill: "darkred", stroke: "tomato" }),
   "linkReshapingTool.handleArchetype":
   objGo(go.Shape, "Diamond", { desiredSize: new go.Size(7, 7), fill: "lightblue", stroke: "deepskyblue" }),
   rotatingTool: objGo(TopRotatingTool), // defined below
   "rotatingTool.snapAngleMultiple": 15,
   "rotatingTool.snapAngleEpsilon": 15,
   "undoManager.isEnabled": true
  });

 // when the document is modified, add a "*" to the title and enable the "Save" button
 myDiagram.addDiagramListener("Modified", function(e) {
  var button = document.getElementById("SaveButton");
  if (button) button.disabled = !myDiagram.isModified;
  var idx = document.title.indexOf("*");
  if (myDiagram.isModified) {
  if (idx < 0) document.title += "*";
  } else {
  if (idx >= 0) document.title = document.title.substr(0, idx);
  }
 });

 // Define a function for creating a "port" that is normally transparent.
 // The "name" is used as the GraphObject.portId, the "spot" is used to control how links connect
 // and where the port is positioned on the node, and the boolean "output" and "input" arguments
 // control whether the user can draw links from or to the port.
 function makePort(name, spot, output, input) {
  // the port is basically just a small transparent square
  return objGo(go.Shape, "Circle",
    {
     fill: null, // not seen, by default; set to a translucent gray by showSmallPorts, defined below
     stroke: null,
     desiredSize: new go.Size(7, 7),
     alignment: spot, // align the port on the main Shape
     alignmentFocus: spot, // just inside the Shape
     portId: name, // declare this object to be a "port"
     fromSpot: spot, toSpot: spot, // declare where links may connect at this port
     fromLinkable: output, toLinkable: input, // declare whether the user may draw links to/from here
     cursor: "pointer" // show a different cursor to indicate potential link point
    });
 }

 var nodeSelectionAdornmentTemplate =
  objGo(go.Adornment, "Auto",
  objGo(go.Shape, { fill: null, stroke: "deepskyblue", strokeWidth: 1.5, strokeDashArray: [4, 2] }),
  objGo(go.Placeholder)
  );

 var nodeResizeAdornmentTemplate =
  objGo(go.Adornment, "Spot",
  { locationSpot: go.Spot.Right },
  objGo(go.Placeholder),
  objGo(go.Shape, { alignment: go.Spot.TopLeft, cursor: "nw-resize", desiredSize: new go.Size(6, 6), fill: "lightblue", stroke: "deepskyblue" }),
  objGo(go.Shape, { alignment: go.Spot.Top, cursor: "n-resize", desiredSize: new go.Size(6, 6), fill: "lightblue", stroke: "deepskyblue" }),
  objGo(go.Shape, { alignment: go.Spot.TopRight, cursor: "ne-resize", desiredSize: new go.Size(6, 6), fill: "lightblue", stroke: "deepskyblue" }),

  objGo(go.Shape, { alignment: go.Spot.Left, cursor: "w-resize", desiredSize: new go.Size(6, 6), fill: "lightblue", stroke: "deepskyblue" }),
  objGo(go.Shape, { alignment: go.Spot.Right, cursor: "e-resize", desiredSize: new go.Size(6, 6), fill: "lightblue", stroke: "deepskyblue" }),

  objGo(go.Shape, { alignment: go.Spot.BottomLeft, cursor: "se-resize", desiredSize: new go.Size(6, 6), fill: "lightblue", stroke: "deepskyblue" }),
  objGo(go.Shape, { alignment: go.Spot.Bottom, cursor: "s-resize", desiredSize: new go.Size(6, 6), fill: "lightblue", stroke: "deepskyblue" }),
  objGo(go.Shape, { alignment: go.Spot.BottomRight, cursor: "sw-resize", desiredSize: new go.Size(6, 6), fill: "lightblue", stroke: "deepskyblue" })
  );

 var nodeRotateAdornmentTemplate =
  objGo(go.Adornment,
  { locationSpot: go.Spot.Center, locationObjectName: "CIRCLE" },
  objGo(go.Shape, "Circle", { name: "CIRCLE", cursor: "pointer", desiredSize: new go.Size(7, 7), fill: "lightblue", stroke: "deepskyblue" }),
  objGo(go.Shape, { geometryString: "M3.5 7 L3.5 30", isGeometryPositioned: true, stroke: "deepskyblue", strokeWidth: 1.5, strokeDashArray: [4, 2] })
  );

 myDiagram.nodeTemplate =
  objGo(go.Node, "Spot",
  { locationSpot: go.Spot.Center },
  new go.Binding("location", "loc", go.Point.parse).makeTwoWay(go.Point.stringify),
  { selectable: true, selectionAdornmentTemplate: nodeSelectionAdornmentTemplate },
  { resizable: true, resizeObjectName: "PANEL", resizeAdornmentTemplate: nodeResizeAdornmentTemplate },
  { rotatable: true, rotateAdornmentTemplate: nodeRotateAdornmentTemplate },
  new go.Binding("angle").makeTwoWay(),
  // the main object is a Panel that surrounds a TextBlock with a Shape
  objGo(go.Panel, "Auto",
   { name: "PANEL" },
   new go.Binding("desiredSize", "size", go.Size.parse).makeTwoWay(go.Size.stringify),
   objGo(go.Shape, "Rectangle", // default figure
   {
    portId: "", // the default port: if no spot on link data, use closest side
    fromLinkable: true, toLinkable: true, cursor: "pointer",
    fill: "white", // default color
    strokeWidth: 2
   },
   new go.Binding("figure"),
   new go.Binding("fill")),
   objGo(go.TextBlock,
   {
    font: "bold 11pt Helvetica, Arial, sans-serif",
    margin: 8,
    maxSize: new go.Size(160, NaN),
    wrap: go.TextBlock.WrapFit,
    editable: true
   },
   new go.Binding("text").makeTwoWay())
  ),
  // four small named ports, one on each side:
  makePort("T", go.Spot.Top, false, true),
  makePort("L", go.Spot.Left, true, true),
  makePort("R", go.Spot.Right, true, true),
  makePort("B", go.Spot.Bottom, true, false),
  { // handle mouse enter/leave events to show/hide the ports
   mouseEnter: function(e, node) { showSmallPorts(node, true); },
   mouseLeave: function(e, node) { showSmallPorts(node, false); }
  }
  );

 function showSmallPorts(node, show) {
  node.ports.each(function(port) {
  if (port.portId !== "") { // don&#39;t change the default port, which is the big shape
   port.fill = show ? "rgba(0,0,0,.3)" : null;
  }
  });
 }

 var linkSelectionAdornmentTemplate =
  objGo(go.Adornment, "Link",
  objGo(go.Shape,
   // isPanelMain declares that this Shape shares the Link.geometry
   { isPanelMain: true, fill: null, stroke: "deepskyblue", strokeWidth: 0 }) // use selection object&#39;s strokeWidth
  );

 myDiagram.linkTemplate =
  objGo(go.Link, // the whole link panel
  { selectable: true, selectionAdornmentTemplate: linkSelectionAdornmentTemplate },
  { relinkableFrom: true, relinkableTo: true, reshapable: true },
  {
   routing: go.Link.AvoidsNodes,
   curve: go.Link.JumpOver,
   corner: 5,
   toShortLength: 4
  },
  new go.Binding("points").makeTwoWay(),
  objGo(go.Shape, // the link path shape
   { isPanelMain: true, strokeWidth: 2 }),
  objGo(go.Shape, // the arrowhead
   { toArrow: "Standard", stroke: null }),
  objGo(go.Panel, "Auto",
   new go.Binding("visible", "isSelected").ofObject(),
   objGo(go.Shape, "RoundedRectangle", // the link shape
   { fill: "#F8F8F8", stroke: null }),
   objGo(go.TextBlock,
   {
    textAlign: "center",
    font: "10pt helvetica, arial, sans-serif",
    stroke: "#919191",
    margin: 2,
    minSize: new go.Size(10, NaN),
    editable: true
   },
   new go.Binding("text").makeTwoWay())
  )
  );

 load(); // load an initial diagram from some JSON text

 // initialize the Palette that is on the left side of the page
 myPalette =
  objGo(go.Palette, "myPalettep", // must name or refer to the p HTML element
  {
   maxSelectionCount: 1,
   nodeTemplateMap: myDiagram.nodeTemplateMap, // share the templates used by myDiagram
   linkTemplate: // simplify the link template, just in this Palette
   objGo(go.Link,
    { // because the GridLayout.alignment is Location and the nodes have locationSpot == Spot.Center,
    // to line up the Link in the same manner we have to pretend the Link has the same location spot
    locationSpot: go.Spot.Center,
    selectionAdornmentTemplate:
     objGo(go.Adornment, "Link",
     { locationSpot: go.Spot.Center },
     objGo(go.Shape,
      { isPanelMain: true, fill: null, stroke: "deepskyblue", strokeWidth: 0 }),
     objGo(go.Shape, // the arrowhead
      { toArrow: "Standard", stroke: null })
     )
    },
    {
    routing: go.Link.AvoidsNodes,
    curve: go.Link.JumpOver,
    corner: 5,
    toShortLength: 4
    },
    new go.Binding("points"),
    objGo(go.Shape, // the link path shape
    { isPanelMain: true, strokeWidth: 2 }),
    objGo(go.Shape, // the arrowhead
    { toArrow: "Standard", stroke: null })
   ),
   model: new go.GraphLinksModel([ // specify the contents of the Palette
   { text: "Start", figure: "Circle", fill: "#00AD5F" },
   { text: "Step" },
   { text: "DB", figure: "Database", fill: "lightgray" },
   { text: "???", figure: "Diamond", fill: "lightskyblue" },
   { text: "End", figure: "Circle", fill: "#CE0620" },
   { text: "Comment", figure: "RoundedRectangle", fill: "lightyellow" }
   ], [
   // the Palette also has a disconnected Link, which the user can drag-and-drop
   { points: new go.List(go.Point).addAll([new go.Point(0, 0), new go.Point(30, 0), new go.Point(30, 40), new go.Point(60, 40)]) }
   ])
  });
 }


 function TopRotatingTool() {
 go.RotatingTool.call(this);
 }
 go.Diagram.inherit(TopRotatingTool, go.RotatingTool);

 /** @override */
 TopRotatingTool.prototype.updateAdornments = function(part) {
 go.RotatingTool.prototype.updateAdornments.call(this, part);
 var adornment = part.findAdornment("Rotating");
 if (adornment !== null) {
  adornment.location = part.rotateObject.getDocumentPoint(new go.Spot(0.5, 0, 0, -30)); // above middle top
 }
 };

 /** @override */
 TopRotatingTool.prototype.rotate = function(newangle) {
 go.RotatingTool.prototype.rotate.call(this, newangle + 90);
 };
 // end of TopRotatingTool class


 // Show the diagram&#39;s model in JSON format that the user may edit
 function save() {
 saveDiagramProperties(); // do this first, before writing to JSON
 document.getElementById("mySavedModel").value = myDiagram.model.toJson();
 myDiagram.isModified = false;
 }
 function load() {
 myDiagram.model = go.Model.fromJson(document.getElementById("mySavedModel").value);
 loadDiagramProperties(); // do this after the Model.modelData has been brought into memory
 }

 function saveDiagramProperties() {
 myDiagram.model.modelData.position = go.Point.stringify(myDiagram.position);
 }
 function loadDiagramProperties(e) {
 // set Diagram.initialPosition, not Diagram.position, to handle initialization side-effects
 var pos = myDiagram.model.modelData.position;
 if (pos) myDiagram.initialPosition = go.Point.parse(pos);
 }
</script>
</head>
<body onload="init()">
<p id="sample">
 <p style="width:100%; white-space:nowrap;">
 <span style="display: inline-block; vertical-align: top; width:105px">
  <p id="myPalettep" style="border: solid 1px black; height: 620px"></p>
 </span>

 <span style="display: inline-block; vertical-align: top; width:80%">
  <p id="myDiagramp" style="border: solid 1px black; height: 620px"></p>
 </span>
 </p>
 <p>
 This sample demonstrates the ability for the user to drag around a Link as if it were a Node.
 When either end of the link passes over a valid port, the port is highlighted.
 </p>
 <p>
 The link-dragging functionality is enabled by setting some or all of the following properties:
 <a>DraggingTool.dragsLink</a>, <a>LinkingTool.isUnconnectedLinkValid</a>, and
 <a>RelinkingTool.isUnconnectedLinkValid</a>.
 </p>
 <p>
 Note that a Link is present in the <a>Palette</a> so that it too can be dragged out and onto
 the main Diagram. Because links are not automatically routed when either end is not connected
 with a Node, the route is provided explicitly when that Palette item is defined.
 </p>
 <p>
 This also demonstrates several custom Adornments:
 <a>Part.selectionAdornmentTemplate</a>, <a>Part.resizeAdornmentTemplate</a>, and
 <a>Part.rotateAdornmentTemplate</a>.
 </p>
 <p>
 Finally this sample demonstrates saving and restoring the <a>Diagram.position</a> as a property
 on the <a>Model.modelData</a> object that is automatically saved and restored when calling <a>Model.toJson</a>
 and <a>Model.fromJson</a>.
 </p>
 <p>
 <p>
  <button id="SaveButton" onclick="save()">Save</button>
  <button onclick="load()">Load</button>
  Diagram Model saved in JSON format:
 </p>
 <textarea id="mySavedModel" style="width:100%;height:300px">
{ "class": "go.GraphLinksModel",
 "linkFromPortIdProperty": "fromPort",
 "linkToPortIdProperty": "toPort",
 "nodeDataArray": [
 ],
 "linkDataArray": [
 ]}
 </textarea>
 </p>
</p>
</body>
</html>

Copier après la connexion

效果如下：

建议各位copy代码，在本地看到效果，然后再根据实际需求去研究它的api，这样才不会太盲目而花费太多时间。

2、工业流程图

<!DOCTYPE html>
<html>
<head>
<meta name="viewport" content="width=device-width, initial-scale=1">
<title>Process Flow</title>
<meta name="description" content="A simple process flow or SCADA diagram editor, simulating equipment monitoring and control." />
<!-- Copyright 1998-2017 by Northwoods Software Corporation. -->
<meta charset="UTF-8">
<script src="../../gojs/go-debug.js"></script>
<script id="code">
 function init() {
 if (window.goSamples) goSamples(); // init for these samples -- you don&#39;t need to call this
 var $ = go.GraphObject.make; // for more concise visual tree definitions

 myDiagram =
  $(go.Diagram, "myDiagramp",
  {
   "grid.visible": true,
   "grid.gridCellSize": new go.Size(30, 20),
   "draggingTool.isGridSnapEnabled": true,
   "resizingTool.isGridSnapEnabled": true,
   "rotatingTool.snapAngleMultiple": 90,
   "rotatingTool.snapAngleEpsilon": 45,
   "undoManager.isEnabled": true
  });

 // when the document is modified, add a "*" to the title and enable the "Save" button
 myDiagram.addDiagramListener("Modified", function(e) {
  var button = document.getElementById("SaveButton");
  if (button) button.disabled = !myDiagram.isModified;
  var idx = document.title.indexOf("*");
  if (myDiagram.isModified) {
  if (idx < 0) document.title += "*";
  } else {
  if (idx >= 0) document.title = document.title.substr(0, idx);
  }
 });

 myDiagram.nodeTemplateMap.add("Process",
  $(go.Node, "Auto",
  { locationSpot: new go.Spot(0.5, 0.5), locationObjectName: "SHAPE",
   resizable: true, resizeObjectName: "SHAPE" },
  new go.Binding("location", "pos", go.Point.parse).makeTwoWay(go.Point.stringify),
  $(go.Shape, "Cylinder1",
   { name: "SHAPE",
   strokeWidth: 2,
   fill: $(go.Brush, "Linear",
     { start: go.Spot.Left, end: go.Spot.Right,
      0: "gray", 0.5: "white", 1: "gray" }),
   minSize: new go.Size(50, 50),
   portId: "", fromSpot: go.Spot.AllSides, toSpot: go.Spot.AllSides
   },
   new go.Binding("desiredSize", "size", go.Size.parse).makeTwoWay(go.Size.stringify)),
  $(go.TextBlock,
   { alignment: go.Spot.Center, textAlign: "center", margin: 5,
   editable: true },
   new go.Binding("text").makeTwoWay())
  ));

 myDiagram.nodeTemplateMap.add("Valve",
  $(go.Node, "Vertical",
  { locationSpot: new go.Spot(0.5, 1, 0, -21), locationObjectName: "SHAPE",
   selectionObjectName: "SHAPE", rotatable: true },
  new go.Binding("angle").makeTwoWay(),
  new go.Binding("location", "pos", go.Point.parse).makeTwoWay(go.Point.stringify),
  $(go.TextBlock,
   { alignment: go.Spot.Center, textAlign: "center", margin: 5, editable: true },
   new go.Binding("text").makeTwoWay(),
   // keep the text upright, even when the whole node has been rotated upside down
   new go.Binding("angle", "angle", function(a) { return a === 180 ? 180 : 0; }).ofObject()),
  $(go.Shape,
   { name: "SHAPE",
   geometryString: "F1 M0 0 L40 20 40 0 0 20z M20 10 L20 30 M12 30 L28 30",
   strokeWidth: 2,
   fill: $(go.Brush, "Linear", { 0: "gray", 0.35: "white", 0.7: "gray" }),
   portId: "", fromSpot: new go.Spot(1, 0.35), toSpot: new go.Spot(0, 0.35) })
  ));

 myDiagram.linkTemplate =
  $(go.Link,
  { routing: go.Link.AvoidsNodes, curve: go.Link.JumpGap, corner: 10, reshapable: true, toShortLength: 7 },
  new go.Binding("points").makeTwoWay(),
  // mark each Shape to get the link geometry with isPanelMain: true
  $(go.Shape, { isPanelMain: true, stroke: "black", strokeWidth: 5 }),
  $(go.Shape, { isPanelMain: true, stroke: "gray", strokeWidth: 3 }),
  $(go.Shape, { isPanelMain: true, stroke: "white", strokeWidth: 1, name: "PIPE", strokeDashArray: [10, 10] }),
  $(go.Shape, { toArrow: "Triangle", fill: "black", stroke: null })
  );

 load();

 loop(); // animate some flow through the pipes
 }

 function loop() {
 var diagram = myDiagram;
 setTimeout(function() {
  var oldskips = diagram.skipsUndoManager;
  diagram.skipsUndoManager = true;
  diagram.links.each(function(link) {
   var shape = link.findObject("PIPE");
   var off = shape.strokeDashOffset - 2;
   shape.strokeDashOffset = (off <= 0) ? 20 : off;
  });
  diagram.skipsUndoManager = oldskips;
  loop();
 }, 100);
 }

 function save() {
 document.getElementById("mySavedModel").value = myDiagram.model.toJson();
 myDiagram.isModified = false;
 }
 function load() {
 myDiagram.model = go.Model.fromJson(document.getElementById("mySavedModel").value);
 }
</script>

</head>
<body onload="init()">
<p id="sample">
 <p id="myDiagramp" style="border: solid 1px black; width:100%; height:500px"></p>
 <p>
 A <em>process flow diagram</em> is commonly used in chemical and process engineering to indicate the general flow of plant processes and equipment.
 A simple SCADA diagram, with animation of the flow along the pipes, is implemented here.
 </p>
 <p>
 The diagram displays the background grid layer by setting <b>grid.visible</b> to true,
 and also allows snapping to the grid using <a>DraggingTool.isGridSnapEnabled</a>,
 <a>ResizingTool.isGridSnapEnabled</a>, and <a>RotatingTool.snapAngleMultiple</a> alongside <a>RotatingTool.snapAngleEpsilon</a>.
 </p>
 <p>
 The diagram also uses the <b>loop</b> function to animate the links by adjusting the <a>Shape.strokeDashOffset</a> every 100 ms.
 </p>
 <p>
 <p>
  <button id="SaveButton" onclick="save()">Save</button>
  <button onclick="load()">Load</button>
  Diagram Model saved in JSON format:
 </p>
 <textarea id="mySavedModel" style="width:100%;height:300px">
{ "class": "go.GraphLinksModel",
 "nodeDataArray": [
{"key":"P1", "category":"Process", "pos":"150 120", "text":"Process"},
{"key":"P2", "category":"Process", "pos":"330 320", "text":"Tank"},
{"key":"V1", "category":"Valve", "pos":"270 120", "text":"V1"},
{"key":"P3", "category":"Process", "pos":"150 420", "text":"Pump"},
{"key":"V2", "category":"Valve", "pos":"150 280", "text":"VM", "angle":270},
{"key":"V3", "category":"Valve", "pos":"270 420", "text":"V2", "angle":180},
{"key":"P4", "category":"Process", "pos":"450 140", "text":"Reserve Tank"},
{"key":"V4", "category":"Valve", "pos":"390 60", "text":"VA"},
{"key":"V5", "category":"Valve", "pos":"450 260", "text":"VB", "angle":90}
 ],
 "linkDataArray": [
{"from":"P1", "to":"V1"},
{"from":"P3", "to":"V2"},
{"from":"V2", "to":"P1"},
{"from":"P2", "to":"V3"},
{"from":"V3", "to":"P3"},
{"from":"V1", "to":"V4"},
{"from":"V4", "to":"P4"},
{"from":"V1", "to":"P2"},
{"from":"P4", "to":"V5"},
{"from":"V5", "to":"P2"}
 ]}
 </textarea>
 </p>
</p>
</body>
</html>

Copier après la connexion

工业流程图

四、总结

Cet article donne une brève introduction basée sur une utilisation de base de js. Je m'arrêterai ici aujourd'hui et je partagerai avec vous si vous avez des questions à l'avenir. Si votre projet répond également à ce type de besoin business, vous pouvez l’essayer ! A noter que si votre entreprise ne manque pas d'argent, il est recommandé d'utiliser des composants authentiques autorisés. Après tout, il est important de respecter les résultats du travail de l'auteur !

Ce qui précède est ce que j'ai compilé pour vous. J'espère que cela vous sera utile à l'avenir.