Many friends are confused about how to install the system after assembling the computer. PHP editor Apple brings you a detailed system installation guide. From selecting the operating system to completing the installation, he teaches you step by step how to inject soul into your computer. Now, let us start the system installation journey together!
First of all, you need to prepare an 8 GB U disk. If you are a novice, you can only go to an Internet cafe, or download the Laomaotao U disk PE system from the computers of colleagues and friends, or Chinese cabbage, U disk PE system, these two PE systems are the simplest and easiest to operate. They do not require complicated settings. You only need to download two softwares. For either one, install the U disk to the USB interface and proceed to the next step through the software prompts. , after the installation is completed, you can test whether the U disk PE system is installed through simulated startup
Of course, these two PE systems will release third-party software installations, such as 2345 browser, after the system is installed. Or 360 security software, some software installed on the C drive by default
You can also choose the relatively pure PE system installation software of micro PE. After the installation is completed, test the normal startup, and then copy the downloaded mirror system Go to, U disk
If you don’t use the U disk as the first boot item, enter the BIOS settings, just restart the computer and use the keyboard shortcuts
Ecs, F9, If you press F10, F11, F12, or delete while the hardware self-test is in progress, it will switch to the U disk boot mode. Select the U disk as the startup item to enter the PE system.
After entering the PE system, Assume that you are installing a 256GB solid-state drive and the installation system is WINDOWS 10. Then set the space of the C drive to 60 GB to 80 GB to ensure that in the future use of the system, it will not easily cause insufficient space on the C drive. phenomenon, affecting the system's operating data exchange, resulting in slow operation, and use the HD hard disk tool built into the PE system to select 4096 when partitioning the hard disk, which is the 4K alignment mode for partitioning, to avoid failure of the hard disk caused by not selecting 4K alignment. A series of situations such as slower reading and writing speeds occur
After the partition is completed, use the PE system's built-in system installation tool to copy the image file. Do not restart directly after copying. Select the startup file repair tool to repair the boot file. Perform a repair boot to avoid failure to recognize the boot file during the restart process, causing the system installation to fail.
Copy the system with a USB disk, and then install it
Nowadays, the system installation for assembling computers is very simple and convenient, and only requires a CD.
First enter the bios settings, set the computer to boot first with the CD-ROM drive, then restart the computer and load the system CD into the CD-ROM drive.
The CD will automatically enter the installation state. At this time, you only need to manually re-partition the partitions, and the rest will be completed automatically.
You can use a USB flash drive to install the system after assembly. After the computer is assembled, a U disk is required to install the system. You can download the U boot disk creation tool of the Win 10 system on other computer devices, and then prepare a U disk of more than 8G to make a U boot disk. , after making the boot door, we only need to boot the assembled computer and enter the BIOS.
Set the U disk startup item as the first boot item, and we can use the prepared startup disk to automatically install the system.
1. On the system page, click Reinstall Now
2. Wait for the system to download
3. After the download is completed, click Restart Now
4. Click Select Windows7 system
5. Finally, the installation is successful
Hello, after assembling the computer and lighting it up, you can follow the following steps to install the system:
1. Prepare an installation disk or U disk. You can download the Windows system image file from the official website and use Rufus or other tools to make it into a USB boot disk.
2. Insert the USB flash drive into the computer, restart the computer and press F12, F11 or F2 to enter the BIOS setting interface.
3. In the BIOS setting interface, find the "Boot" option and put the USB boot device first.
4. Save the settings and exit the BIOS. The computer will automatically restart and boot from the USB flash drive.
5. After entering the system installation interface, follow the prompts. Select the system version to be installed, installation location, etc.
6. After the system installation is completed, enter the user name, password and other information according to the prompts to complete the system settings.
7. After the installation is complete, you can download and install drivers and software.
Notes:
1. Before installing the system, it is best to back up important data to prevent data loss.
2. When installing the system, you need to pay attention to selecting the correct system version, otherwise it may not work properly.
3. After the installation is complete, you need to install the driver, otherwise the hardware may not work properly or the performance may be reduced.
4. When installing software, it is best to choose genuine software to avoid copyright issues.
After assembling the computer yourself, you need to prepare an operating system installation disk or USB flash drive, insert it into the computer and start the computer.
When the computer is turned on, you can press the F12 or DEL key to enter the BIOS settings and choose to boot from the installation disk or U disk.
Then follow the steps prompted by the installer to install the operating system, including selecting the installation hard disk, allocating disk space, entering the product key, setting the user name and password, etc.
During the installation process, you need to pay attention to selecting the correct operating system version, such as Windows 10 Home Edition or Professional Edition.
After the installation is completed, drivers and other software need to be installed to enable the computer to run and be used normally.
The installation method is as follows
1. Prepare the system installation disk or USB boot installation disk.
2. Set the BIOS to boot first. If the system disk is set to CD-ROM boot, if the USB boot disk is set to USB boot.
3. Press any key to enter the installation interface, select the correct installation method and installation drive letter, the system will automatically install the system, we only need to wait for the end, but you need to operate it at certain times, such as: time, Language settings, etc.
4. After the installation is completed, it is still not possible, because some system disks may have some drivers, but it is recommended to install the latest drivers.
1. Turn on the computer and press the F2 key to enter the BIOS setting interface, select Advanced BIOS Settings: Advanced BIOS Features;
2. Advanced BIOS Settings (Advanced BIOS Features) interface, first select the hard disk boot priority level, Hard Disk Boot Priority;
3. Hard Disk Boot Priority selection: Use the plus and minus signs ", -" on the small keyboard to select the mobile device, and select the U disk in On the top.
4. Then select the first boot device (First Boot Device): select the U disk to boot.
5. Then restart to start the step-by-step installation. The installation process will restart several times, just wait.
6. After installing the system, remember to install the driver!
You can use the U disk to boot and use the U disk to install the Windows system.
The above is the detailed content of How to install the system after the computer is assembled?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
