How much performance will be lost if the graphics card is installed vertically?

I would like to ask my friend if the vertical installation of the graphics card will make the heat dissipation better

1. The vertical air duct has a positive impact on the heat dissipation of the graphics card, but the impact is not significant. However, graphics cards in chassis with vertical air ducts are usually installed vertically, which has a huge impact. The reason is that the heat pipe design of most graphics cards does not work properly when installed vertically.

2. Degree. According to the relevant information on the vertical installation of the Colorful graphics card, it was found that the temperature of the Colorful graphics card in the vertical installation was 75 degrees. This card looks really good when placed vertically. The room temperature here is 30 degrees, and the graphics card temperature is 75 degrees when playing games. The temperature control is okay. The graphics card looks very good, and the imitation public version has good heat dissipation effect.

3. Caused by the heat dissipation of the graphics card. When the graphics card is inserted vertically, the heat dissipates to the tempered glass, so it is warm to the touch. Graphics card (Videocard, Displaycard, Graphicscard, Videoadapter) is one of the basic components of a personal computer.

4. First of all, the cost of a graphics card extension cable is several dozen, while a better graphics card extension cable costs hundreds, or even more. Heat dissipation If the side panel of the chassis and the graphics card are close to each other, the air may not be sucked in, which affects the heat dissipation of the graphics card. In addition, installing the graphics card vertically may cause the air ducts to be messy and the heat dissipation to be worse.

What impact will the vertical installation of the graphics card have?

Yes. Hot air moves upward. Traditional graphics cards have always been installed flat, which has a certain impact on the heat dissipation of the graphics card. But because the graphics card is located below the processor, it also reduces the impact on processor heat dissipation.

If the side panel of the chassis and the graphics card are close to each other, the air may not be sucked in, which affects the heat dissipation of the graphics card. In addition, installing the graphics card vertically may cause the air ducts to be messy and the heat dissipation to be worse.

Suspending the graphics card will affect the heat dissipation performance of the graphics card, which is mainly due to the normal working principle of the heat pipe radiator.

Comparison of heat dissipation between vertical and horizontal graphics card insertion

1. The advantage of the vertical fork is to prevent damage to the graphics card and motherboard, and has an alternative appearance. The disadvantage of the vertical fork is the loss of performance, the price is more expensive, and the heat dissipation Difference. The advantages of the horizontal fork are good performance, high cost performance, and good heat dissipation. The disadvantage of the horizontal fork is that the graphics card and motherboard are easily damaged and the appearance is low.

2. However, because the graphics card is located below the processor, it also reduces the impact on the heat dissipation of the processor.

3. The vertically mounted graphics card saves internal space. Vertical installation of the graphics card is achieved by using a graphics card extension cable, which will cause a loss in graphics card performance.

4. It can be installed horizontally or vertically. This also depends on personal preference. Although vertically mounted graphics cards look good, they lose performance. In fact, it is very simple to install the hardware horizontally and vertically. It is basically not difficult at all as long as you watch the video. Remember not to use too much force to produce miracles...a strong force may cost you just a few thousand yuan.

5. First of all, the cost of a graphics card extension cable is several dozen. A good graphics card extension cable costs hundreds, or even more. Heat dissipation If the side panel of the chassis and the graphics card are close to each other, the air may not be sucked in, which affects the heat dissipation of the graphics card. In addition, installing the graphics card vertically may cause the air ducts to be messy and the heat dissipation to be worse.

Does the vertical air duct have a great impact on the heat dissipation of long graphics cards? Has anyone tested it?

1. However, if the chassis is placed on the desktop, it will affect the user experience, so try to choose a chassis with a fan on the top. The position is relatively good, although some air goes out directly from the front panel to the top without passing through the radiator, but this is more in line with usage habits. When there are too many fans on the front panel, it is better to install fewer fans rather than install more fans.

2. As for your understanding that the tip is the condensing end, I don’t think so. Because the tip is close to the core, even though there is a fan to assist in heat dissipation, the temperature should be higher. How could condensation be possible? On the contrary, the part closer to the end of the graphics card may be more conducive to condensation.

3. The heat dissipation of the graphics card is a big problem, because the graphics card can hardly absorb the wind, and the open cooling graphics card does not work well with the vertical air duct. You will find that it is a steady 80 degrees when fully loaded, and then the graphics card automatically reduces the frequency to maintain a high temperature of 80 degrees.

4. It doesn’t matter if the fan faces the graphics card. Some chassis designs have vertical air ducts, up and down. If the heat sink is not facing the graphics card well, hot air will be discharged in the direction of the heat sink. If the heat sink is still large, it should be close to the graphics card. Expelling high-temperature air will affect the graphics card radiator. Side blowing (fan inlet, heat sink exhaust.

Advantages and disadvantages of vertical and horizontal forks of the graphics card

Advantages: The graphics card is installed vertically, the graphics card PCB is not easily deformed and damaged, and the motherboard PCI slot is load-bearing Greatly reduced. The vertical installation of the graphics card saves internal space. The vertical installation of the graphics card is achieved by using a graphics card extension cable, which will cause a loss in graphics card performance. The vertical fork is simpler than the horizontal fork. Whether it is a horizontal split or a vertical split, for the sake of safety, you must perform leg press to warm up.

Different postures: the horizontal split is to stretch the legs to the left and right, and use both hands to assist with support; the small back sides of the legs are on the ground. , press the ground tightly, place the heels of both feet on the ground, stretch the toes to the left and right or hook the hips to fully open them into a straight line. In addition to your ligaments, another thing is that you need to open your span. This is why you can do vertical splits without warming up, but it is different if you want to do horizontal splits easily. , then he should start exercising from an early age.

Should the split water-cooled graphics card be installed vertically or horizontally?

1. Of course, the chassis promoted as a vertically installed graphics card may be designed with two graphics card slots. Horizontal-mounted graphics cards and vertical-mounted graphics card slots can be Interchangeable, different chassis brands have different designs, but the ultimate goal is to allow the graphics card to be installed normally both horizontally and vertically.

2. In terms of performance, the difference between the two depends on the model of the graphics card. Vertical and horizontal installation are the same, which does not affect the use effect. This is based on the position of the motherboard and the interface type. If If you usually play a lot of games, it is recommended to use a graphics card above 1060. The frame rate performance in games is pretty good.

3. It doesn’t have to be placed vertically. For ordinary cases with front airflow and rear airflow, the water cooling should be installed in the front.

4. Yes. Hot air moves upward. Traditional graphics cards have always been installed flat, which has a certain impact on the heat dissipation of the graphics card. But because the graphics card is located below the processor, it also reduces the impact on processor heat dissipation.

5. The graphics card will not deform when installed horizontally. Because most graphics cards now have metal backplates and will not deform.

The above is the detailed content of How much performance will be lost if the graphics card is installed vertically?. For more information, please follow other related articles on the PHP Chinese website!