The internal structure of a solid-state drive. Insert the solid state drive into the optical drive box. Remove the screw from the optical drive location. Use a screwdriver to push the metal piece down and the optical drive pops out. Place the optical drive box containing the solid state drive into the optical drive bay of the notebook. Remove the optical drive bezel. Install the bezel on the optical drive position. finished.
Place the back of the notebook face up, use a screwdriver to unscrew the screws marked in the figure below, and open the back panel from the position of the green arrow. Use a screwdriver to unscrew the three screws marked in red and remove the mechanical hard drive. Install the solid state drive into the location of the mechanical hard drive. Then put it back.
First remove the casing of the notebook. Some notebook hard drives have independent casings. After removal, you can directly see the location of the hard drive. Then use a cross-head screwdriver to remove the screws of the hard drive.
Solution 1: Remove the four screws on the bottom of the laptop to access the hard drive and optical drive! Easily remove the hard drive and optical drive.
The internal structure of solid state drive. Insert the solid state drive into the optical drive box. Remove the screw from the optical drive location. Use a screwdriver to push the metal piece down and the optical drive pops out. Place the optical drive box containing the solid state drive into the optical drive bay of the notebook. Remove the optical drive bezel. Install the bezel on the optical drive position. finished.
Place the back of the notebook face up, use a screwdriver to unscrew the screws marked in the figure below, and open the back panel from the position of the green arrow. Use a screwdriver to unscrew the three screws marked in red and remove the mechanical hard drive. Install the solid state drive into the location of the mechanical hard drive. Then put it back.
First use a screwdriver to unscrew the screws on the optical drive, as shown in the picture below. Then pull out the optical drive, as shown in the picture below. Find a wire, insert it into the disc ejection hole, open the optical drive tray, and remove the bezel, as shown in the picture below. There will be two buckles, which can be seen by gently prying with a screwdriver, as shown in the picture below.
How to add a solid state drive to a notebook: Turn the notebook over and remove the 9 fixing screws under the notebook. Unplug the optical drive. You should first open the No. 1 position, then press and hold the No. 2 latch to pull out the optical drive. This interface can be connected to common accessories such as optical drives, hard drives, graphics cards, radiators, etc., and all support hot swapping.
1. The internal structure of the solid-state drive. Insert the solid state drive into the optical drive box. Remove the screw from the optical drive location. Use a screwdriver to push the metal piece down and the optical drive pops out. Place the optical drive box containing the solid state drive into the optical drive bay of the notebook. Remove the optical drive bezel. Install the bezel on the optical drive position. finished.
2. Place the back of the notebook face up, use a screwdriver to unscrew the screws marked in the figure below, and open the back panel from the position of the green arrow. Use a screwdriver to unscrew the three screws marked in red and remove the mechanical hard drive. Install the solid state drive into the location of the mechanical hard drive. Then put it back.
3. How to add a solid state drive to a notebook: Turn the notebook over and remove the 9 fixing screws under the notebook. Unplug the optical drive. You should first open the No. 1 position, then press and hold the No. 2 latch to pull out the optical drive. This interface can be connected to common accessories such as optical drives, hard drives, graphics cards, radiators, etc., and all support hot swapping.
4. Question 1: How to install the SSD solid state drive on the laptop. If the laptop has an optical drive, go online and buy a laptop model optical drive hard drive bracket, and install the solid state drive into the computer optical drive.
The external solid-state drive can be connected to the optical drive on the laptop. The specific method is as follows: Prepare a hard disk box with an optical drive and place the solid-state drive Align the optical drive and hard disk box interface and insert it. Remove the laptop's optical drive.
Solid state drives can be externally connected to laptops. The default is SATA interface, a standard 5-inch hard drive, and the usage method is the same as a mechanical hard drive. The main speed advantage of solid-state drives is 4K random, which is the advantage of running programs. Although continuous transmission is also very fast, the advantage is not very obvious. Solid state drives are not recommended as external drives.
Laptops can be equipped with solid-state drives, but the laptop is required to have extra interfaces. It is recommended that you refer to the following methods: Materials required: laptop, solid state drive, screwdriver. Turn the notebook over and remove the 9 fixing screws on the bottom of the notebook. Unplug the optical drive.
Laptops can be equipped with solid-state drives, but the laptop is required to have extra interfaces. It is recommended that you refer to the following methods: Materials required: laptop, solid state drive, screwdriver. Turn the notebook over and remove the 9 fixing screws on the bottom of the notebook. Unplug the optical drive.
Solid-state drives can be externally connected to laptops. The default is SATA interface, a standard 5-inch hard drive, and the usage method is the same as a mechanical hard drive. The main speed advantage of solid-state drives is 4K random, which is the advantage of running programs. Although continuous transmission is also very fast, the advantage is not very obvious. Solid state drives are not recommended as external drives.
The external solid state drive can be connected to the optical drive on the laptop. The specific method is as follows: Prepare a hard disk box with an optical drive slot, align the solid state drive with the optical drive hard disk box interface, and insert it into it. Remove the laptop's optical drive.
Solid state drives can be externally connected to laptops. There are three interfaces for solid-state drives. The default interface is SATA, which is a standard 5-inch hard drive. The usage method is the same as a mechanical hard drive.
Old computers have SATA interfaces. Through this interface, you can purchase a solid state corresponding to the same SATA interface and install it together. The solid state speed is affected by the interface speed. The computer interface is SATA0, and the solid state speed is greatly affected. , the speed is only over 200, which is still faster than ordinary mechanical hard drives.
Generally, a laptop can add a solid-state drive. You only need to remove the laptop casing, install the prepared laptop solid-state drive, and then insert it into the hard drive slot. Then you can remove the optical drive. Put the mechanical hard drive in, and finally install the system.
1. Original memory. You need to contact Dell headquarters or after-sales service point to purchase it. The price is higher, but the stability and compatibility are very high, and there will be no compatibility problems.
2. You need to pay attention to the following matters: the hard disk data cable interface is very small, so you must carefully unplug the data cable plug on the hard disk when replacing it. Back up various working data on the mechanical hard drive in advance. Use a USB adapter cable to connect the solid state drive to the notebook and clone the notebook data.
3. The C drive must be a primary partition, not a logical partition, and must be activated (Active) before the system can be installed, otherwise it cannot be started. For the replaced mechanical hard drive, you can buy a USB0 hard drive box online for tens of yuan and put it in to make a mobile hard drive.
4. First, turn on the ahci mode in bios. The ones that are not too old are open. Second, it must be aligned at 4K. Installation using Microsoft's original CD will be aligned. If it is a third party, be sure to align it in advance. Third, don’t use up all the space.
The above is the detailed content of Solid state drive for laptop. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
