Computer memory 12G4 4G motherboard is Gigabyte GA-970A-DS3?

php Editor Xigua will give you the answer: When using a computer with 12GB of memory and four 4GB motherboards Gigabyte GA-970A-DS3, the problem you may encounter is that the memory slots do not match. This motherboard has 4 memory slots, but only supports dual-channel memory mode, so the 4 memory sticks may not work at the same time. It is recommended to try using only 2 memory sticks and make sure the slots match for best performance. If you still have problems, you can check the motherboard manual or contact technical support for more help.

The computer memory 12G4 4G motherboard is Gigabyte GA-970A-DS3?

It’s really a bit strange. It seems like you have memory plugged into all four memory slots. Three of the slots are plugged into 4G memory, and the last slot is plugged into the old 2G memory. memory, and one of the three 4GB slots is not plugged in properly, and the capacity is not fully recognized. Therefore, the 64-bit system only recognizes 10G (4 4 2) of memory. Restart and check the recognition in the motherboard BIOS. How much memory is out? If it is displayed as 10240MB in the BIOS, it means that the 4G memory stick on one of the slots has not been recognized. Generally speaking, the number recognized in the BIOS will be displayed in the operating system without any error.

You should make sure that only these three 4G memory sticks are plugged into the motherboard, and remove the original 2G sticks and do not use them. Also, check the motherboard instructions. Are there any special restrictions when plugging in three memory sticks?

For example, when there are three or more memory sticks, only full single-sided memory is supported, or when three sticks are inserted, the motherboard cannot provide dual-channel support for memory. It must be in the order of slot 1, slot 2, and slot 3. Insert, not 1, 2, 4 or 1, 3, 4, etc.

Can H41 motherboard be equipped with 4G memory stick?

Can't.

The h61 motherboard is an old motherboard model. It supports up to the third generation Intel processor, so it can only support DDR3 1333/1066MHz memory sticks. If you want to use fourth-generation memory, you need to replace the motherboard and purchase a new DDR4 memory stick before you can use it. Therefore, h61 motherboard does not support fourth generation memory.

Can 2g and 4g memory sticks be shared on g41 motherboard?

Theoretically, G41 motherboard can be compatible with 2G and 4G memory sticks, but there will be some limitations. First of all, if 2G and 4G memory sticks are inserted at the same time, they will run at the lowest speed, which is the speed of 2G.

Secondly, if the maximum memory capacity supported by the motherboard is 8G, then when a 4G memory stick is inserted, the maximum memory capacity is still 8G, because the motherboard can only recognize 4 memory slots, each slot Supports up to 2G memory. Therefore, if you want to make full use of the performance of 4G memory sticks, it is best to use two 4G memory sticks to form 8G memory.

Can a 4g memory stick and an 8g memory stick be used together?

8g memory sticks and 4g memory sticks can be used together.

8g and 4g memory sticks can be used together to form a dual track, which has better performance than a single 8g memory stick, but compared to two 8g memory sticks of the same capacity and frequency assembled together to run on a dual track The effect is worse.

Make sure that these two pieces of memory can be used normally when plugged in separately. Check how much memory the motherboard supports and whether the two memory modules are compatible. Memory modules of the same type and different capacities can be mixed.

For example, DDR3 4GB is the same as DDR3 8GB. Different frequencies of the same type can be mixed, but the performance should be reduced to the lowest one. Such as 1600/1333/1066 in DDR3.

Extended information:

The memory capacity recognition is incorrect after mixed insertion. Some old motherboards only support 256MB memory capacity (i815 series only supports 512MB). The excess part cannot be recognized and used. .

Of course, there are some situations where the motherboard cannot support high-bit memory particles. The only way to solve such problems is to replace the motherboard or memory.

The computer cannot start normally, mostly due to poor contact between the memory and the motherboard slot. Wipe the gold fingers and memory slots of the memory with alcohol and a clean paper towel.

And check whether the memory slot has any signs of damage. Generally, the problem can be solved. If the problem still exists at this time, it means that the memory has been damaged. At this time, the only way to replace the memory module is with a new one.

If the motherboard supports up to 4G of memory, can an 8G memory stick be plugged in?

OK.

If it is an older motherboard, there is an upper limit on the maximum memory it supports. If it is less than 12G, even if these two pieces of memory are inserted, its performance cannot be fully exerted. Some motherboards will Not supported, only one memory can be detected.

The above is the detailed content of Computer memory 12G4 4G motherboard is Gigabyte GA-970A-DS3?. For more information, please follow other related articles on the PHP Chinese website!