php editor strawberry shares the solution: If the mac cannot enter the password interface, it may be caused by a system problem or hardware failure. You can try restarting the computer, resetting NVRAM, using recovery mode to repair the system, or try safe mode. If the problem persists, it is recommended to contact Apple customer service or professional maintenance personnel for inspection and resolution.
The computer cannot enter the password because the keyboard mode is not turned on or the keyboard is damaged. To solve this problem, you can enter the BIOS settings to enable the USB interface or replace the keyboard. Also make sure the small numeric keypad is turned on.
2. Restart the MAC computer. After hearing the startup sound, press and hold the Command+R keys to enter the utility interface. Then find the "Utilities - Terminal" option in the upper left corner and click to enter the terminal interface. Enter the command: resetpassword in the terminal interface, and then press the Enter key.
When the computer is turned on and the password cannot be entered, check the keyboard letter case settings and whether the keys pop up normally.
4. If the Apple all-in-one keyboard fails, you can plug it in at this time.
In the password input interface, click the settings button on the lower left and select "Typing without using the keyboard (on-screen keyboard)" to open the soft keyboard. At this time, you can use the mouse to enter the password and click the Enter key to enter the system desktop.
If the keyboard is unresponsive, you can first try to enter the BIOS to determine whether the problem is caused by hardware or software. If you can enter the BIOS, it may be a software problem. You can try entering safe mode or reinstalling the system. If you cannot enter the BIOS, there may be a keyboard problem. You can consider replacing the keyboard to solve the problem.
Check whether the keyboard and mouse are properly connected. If you are not sure whether there is a connection problem, you can try using an external keyboard or mouse for input. Try restarting your Mac at the login screen, sometimes this method can temporarily solve the problem.
For system bugs, you can try to restart and hold down the power key command r. After entering the configuration page, click the account avatar and enter the power-on password. After entering the correct password, you can restart the system and enter the password to log in to the system.
If the problem persists after reinstalling the driver, it may be due to a conflict between other installed software and the keyboard driver. Press F8 at startup, enter the advanced options, and try to use "Last Known Good Configuration" to restore the computer configuration, which may help solve the problem.
The method to solve the problem that the dual-system Apple computer does not respond when you enter the password when it is turned on is as follows: Enter "Safe Mode", enable the "System Restore" function, and restore the system to the time period when it was last normally turned on. If your system does not have the "System Restore" function turned on, uninstall all the drivers, programs, and patches you recently installed.
Restart the MAC computer. After hearing the sound, press and hold the Command+R keys to enter the utility interface. Then click "Utilities - Terminal" in the upper left corner to enter the terminal interface. Then enter the code: resetpassword and click Enter.
To crack the super administrator password, you usually use brute force cracking and use a third-party boot to clear it. It is recommended to use a USB flash drive to boot, or you can use a system disk.
The Apple computer cannot enter the password on the unlock page. This is caused by a setting error. The solution is as follows: First restart the MAC computer, click and enter the password, and a white dot will appear. At this time, enter the password in the terminal, click Launchpad, and click Other.
Check the input method settings: Some input methods may switch to Chinese input mode, making it impossible to enter numbers. You can try pressing "Shift" and "Ctrl" key combinations to change the input method to English mode. Check your keyboard connection: If you can't enter numbers on your keyboard, there may be a problem with the keyboard itself or a bad connection.
Keyboard failure: Keyboard failure may cause some keys on the keyboard to not work properly. USB interface problem: If you are using a wired keyboard, the USB interface may be damaged or loose, causing the keyboard to not work properly.
When the computer is turned on to enter the password PIN, the letters cannot be entered because of an input error. The solution is: press the win key and click the [Settings] button as shown in the picture. In the settings window that pops up, search for the content as shown in the picture, and select the [Change Password] option in the pop-up menu.
In this case, there is usually a problem with the system. Reinstalling the operating system can restore it to normal. 1. Insert the system CD into the computer CD-ROM drive. 2. Restart the computer, enter the BIOS, and set the optical drive as the preferred boot device in the BIOS. 3. After restarting, the system will boot from the system CD, and the installation will be normal after booting.
1. Solution: Reset password. The first method: Turn on the computer and press CMD R to enter the network recovery mode, wait for the earth to rotate and the progress bar to finish reading, enter the system tools - terminal - enter resetpassword to change the password directly.
2. Keep holding down the ALT key to boot and enter Select Recovery. Or hold down the Command R key to enter the mac OS utility. Select Reinstall mac OS and continue to the next step. Go to the next choice and continue... Just wait until the system is installed. Select Simplified Pinyin, set it later, and continue.
3. Why can’t I enter the macbookair after entering the correct password? Solution: Reset the password. The first method: Turn on the computer and press CMD R to enter the network recovery mode, wait for the earth to rotate and the progress bar to finish reading, enter the system tools - terminal - enter resetpassword to change the password directly.
4. The first method: Turn on the computer and press CMD R to enter the network recovery mode, wait for the earth to rotate, the progress bar has finished reading, enter the system tools - terminal - enter resetpassword to change the password directly.
5. Try pressing OK without entering anything. If it still doesn't work, you can only insert the system disk that came with it to reset the password.
Conclusion: The above is all the content that this site has compiled for you about Mac being unable to enter the password input interface. Thank you for taking the time to read the content of this site. I hope it will be helpful to you. Don’t forget to learn more related content. Find it on this site.
The above is the detailed content of Can't enter the password input interface on Mac?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
