How to operate the notebook after replacing the solid state drive

Lenovo laptop installed solid state and removed the original mechanical hard drive. How to enter the BIOS settings after booting up: Turn on the computer, press the power button and immediately press the F2 key or DEL key to enter the BIOS settings. Find the Boot option: In the BIOS main interface, use the keyboard arrow keys to select the Boot option.

You haven't figured out how to make the system disk boot first. This requires opening the BIOS interface for settings. There is a boot item in the BIOS window. After selecting it, there will be a device driver sequence. After the first selection, The device that starts first will appear. Just select the solid-state drive symbol and press F10 to exit.

See the picture: shut down, power off, remove the mechanical hard drive, plug in the newly purchased solid state drive, and select the first sata0 socket on the motherboard.

Operation method: First remove the mechanical hard drive and install the SSD. Turn on the computer, boot and install the system to the SSD. If the SSD is smaller than 64GB, partitioning is not recommended, as long as the system partition is used. If the size is larger than 64G, it is recommended that the system disk be divided into 50GB or more.

Lenovo laptop has a new solid-state drive that comes with the system installation. What keys do you press after booting up...

Enter the BIOS settings: turn on the computer power, press the power button and immediately press F2 key or DEL key to enter BIOS settings. Find the Boot option: In the BIOS main interface, use the keyboard arrow keys to select the Boot option.

Connect the USB flash drive to the computer that needs to be installed, turn it on and enter the BIOS (usually press F2 for laptops, Delete for desktops). After entering, find "AdvancedBIOSFeatures" under Boot in the BIOS. Then find "HardDiskBootPriority". Then select the USB option and press F10 to save and exit.

It’s very simple. It only requires one step, that is, you only need to add a picture: After installing the SSD, turn on the computer and press the F1 key to enter the BIOS. Use the up and down arrows to select System Summary. After selecting, click the enter key. (Enter key); after entering, find Sata drive 012 and check whether the SSD you installed has been recognized.

Make the Xiaobai U disk boot disk, and then copy the downloaded computer system iso file directly to the U disk.

After the computer is turned on, press DEL to enter bios and enter advanced mode as shown. (The shortcut keys to enter bios are different for different computer motherboards.) In advanced mode, open the advanced options on the way to find the hard disk mode. This is the culprit that affects our system installation, as shown in the figure.

How to set up the SSD after installing it

BIOS settings: When the computer is turned on, press the Del or F2 shortcut keys to enter the BIOS setting interface. In the BIOS setting interface, find the "Boot" option and set the solid-state drive as the first boot item. UEFI settings: If your computer supports UEFI boot mode, you can set startup items in the UEFI settings interface.

Setting method after installing the solid-state hard drive: After installing the hard drive into the computer, turn on the computer and enter the desktop. Press the shortcut key "win R" to open the run window. In the run window, enter "compmgmt.msc" and click the "OK" button to open the "Computer Management" window.

Operating computer: Xiaoxin Pro162022 Operating system: Windows 10 After installing the hard disk, the setting steps are as follows: After installing the hard disk on the computer, turn it on, on the computer desktop, select My Computer and right-click - Manage to enter the computer management interface .

How to operate after installing a solid-state drive on your computer

The setting method after installing a solid-state drive is as follows: Right-click "My Computer", select "Manage", and click to open "Disk Management". After clicking on the corresponding disk, select "Change Drive Letter" above and click "Change". Select the letters according to the plan, and click "OK" after setting.

After installing the hard disk into the computer, turn on the computer and enter the desktop. Press the shortcut key win R to open the run window. In the run window, enter compmgmt. msc, and then click the OK button to open the Computer Management window. In the Computer Management window, click Disk Management on the left.

Operating computer: Xiaoxin Pro162022 Operating system: Windows 10 After installing the hard disk, the setting steps are as follows: After installing the hard disk on the computer, turn it on, on the computer desktop, select My Computer and right-click - Manage to enter the computer management interface .

The above is the detailed content of How to operate the notebook after replacing the solid state drive. For more information, please follow other related articles on the PHP Chinese website!