How to use stc-isp

Usage steps: 1. Download and install the STC-ISP software; 2. Connect the microcontroller; 3. Open the STC-ISP software; 4. Select the microcontroller model; 5. Set the serial port parameters; 6. Select the program file; 7. Erase the microcontroller; 8. Burning program; 9. Verification program; 10. Disconnect.

STC-ISP is a programming software for STC series microcontrollers, used for programming and debugging. The following are the basic steps to use STC-ISP:

1. Download and install STC-ISP software: First, you need to download the STC-ISP software from the STC official website or other reliable sources, and install it according to the installation wizard .

2. Connect the microcontroller: Connect your STC series microcontroller to the computer. You can use a USB to serial port module or other serial port connection methods.

3. Open the STC-ISP software: Double-click to open the STC-ISP software, and you will see a simple interface.

4. Select the microcontroller model: In the upper right corner of the software interface, select the STC series microcontroller model you are using. If you are not sure about the model number, you can check the model identification of the microcontroller or refer to the specification sheet of the microcontroller.

5. Set serial port parameters: On the left side of the software interface, click the "Serial Port Settings" button to set the correct serial port number and baud rate. Make sure to select the correct serial port number and baud rate for communication with the microcontroller.

6. Select the program file: Click the "File" menu on the software interface and select the program file you want to burn. Program files are usually files with a .hex or .bin extension.

7. Erase the microcontroller: Click the "Erase" button on the software interface to erase the Flash memory of the microcontroller to its initial state. This will clear previously burned programs and data.

8. Burn the program: Click the "Burn" button on the software interface to burn the selected program file into the Flash memory of the microcontroller. The burning process may take some time, depending on the size of the program file and the performance of your computer.

9. Verify the program: After the burning is completed, click the "Verify" button on the software interface to verify whether the burned program is consistent with the original program file. This step ensures that the program is correctly burned into the microcontroller.

10. Disconnect: After the programming and verification are completed, you can disconnect the microcontroller from the computer.

Please note that the above steps are only basic steps, and the specific operations may be slightly different depending on the microcontroller model and software version. Before using the STC-ISP software, it is recommended to read the user manual of the software or refer to the documentation on the STC official website for more detailed information and operation guidelines.

The above is the detailed content of How to use stc-isp. For more information, please follow other related articles on the PHP Chinese website!