What should I do if the door of TCL drum washing machine cannot be opened?

Tcl drum washing machine door cannot be opened Solution: 1. Check whether the power supply is on; 2. Check whether the PTC heating element is damaged; 3. Check whether the electric door lock is malfunctioning; 4. You can try to slap it with your hands Cover the handle position and rely on vibration to reset the plastic pin to open the door; 5. Twist the knob again to any position and the door can be opened; 6. Use the emergency button in the lower right corner and pull down along the vertical direction of the red pull cord and the door can be opened. Leave the door open.

The operating environment of this tutorial: Windows 10 system, DELL G3 computer.

A washing machine is an inseparable appliance in our lives. It can help us wash clothes very quickly and is very convenient. However, after using the washing machine for a long time, various problems will inevitably occur, such as what to do if the washing machine door cannot be opened. Today, the editor will bring you a solution to the problem of the washing machine door not opening. I hope it can help you.

How to deal with the problem that the tcl washing machine door cannot be opened

##1. What to do if the tcl washing machine door cannot be opened Do

1. The drum washing machine has a safety lock function. The lid cannot be opened when the power is on. It may be that the lid cannot be opened when the power is on.

2. There is a PTC heating element inside the drum washing machine. When the door is closed, the PTC heats up, and the bimetallic sheet is heated and bent, turning on the main power supply and locking the door lock at the same time. After a period of time after the power is cut off, the bimetallic piece cools down and resets. It may be that the PTC heating element is damaged and the door cannot be opened.

3. Failure of the electric door lock of the drum washing machine will also cause the washing machine door to fail to open.

2. TCL washing machine door cannot be opened. How to deal with it

1. You can tap the cover handle with your hand and rely on vibration to reset the plastic pin to open the door.

2. If the door still cannot be opened after a long time after turning the knob to the stop position, you can turn the knob to any position again. You will hear the door lock "snap" after a few seconds. , then the door can be opened.

3. There is an emergency button in the lower right corner of the machine. Open the cover outside the drainage pump in the lower right corner. You will see a red plastic pull cord. Pull down along the vertical direction of the pull cord and you will hear the door lock slightly. The sound of i can also open the door. It should be noted that if there is water in the bucket or the temperature is too high, the door cannot be opened. You need to drain the water in the bucket first and then use the above method to solve the problem.

4. The drum washing machine has an electric lock protection device. The washing machine is still in the protection period for two or three minutes after the power is cut off, and the door lock will not open. Therefore, do not rush to go after the washing machine stops working. Just open the door and open it again in three to five minutes.

3. What are the common faults of tcl washing machines?

1. Phenomenon: The dehydration barrel rotates continuously

Detection: The power supply can be cut off after opening the dehydration barrel door cover, but it does not The brakes are broken, and the fault is in the brake mechanism. Check the brake mechanism on the dehydration motor and find that the spring on the brake arm has fallen off, preventing the brake arm from tightening against the motor brake drum and causing the brake to fail. After tightening the spring again, dehydration is normal.

2. Phenomenon: During dehydration, a loud noise is emitted inside the machine

Detection: When the power is off, let the brake mechanism separate and rotate the dehydration inner barrel, and the noise is present. After careful listening, the sound came from the leather bowl. It was analyzed that the lack of lubricating oil in the bearings in the leather bowl caused friction and caused friction noise. Turn the washing machine upside down, inject oil into the junction between the dehydration motor shaft and the leather bowl, and roll the dehydration inner barrel to allow the oil to seep in. After leaving it for a while to test the machine, the noise disappears.

3. Phenomenon: When using a drum washing machine, water leakage is found at the door ring or the washing box.

Detection: Water leakage is found at the door ring. Check whether the hatch is tightly closed and whether there is any foreign matter mixed in. The hatch door is fully sealed. Use low-foaming detergent and put the detergent into the scrubbing box. Do not put too much at one time.

4. Phenomenon: The washing machine shakes back and forth when using the washing machine to dehydrate

Detection: The drum washing machine has a transport fixing screw to fix the inner cylinder. It must be removed before use, otherwise the vibration reduction system will not work. There are very large oscillations. The washing principle of the drum washing machine relies on beating. When there is too much water, it not only wastes water, but also cannot form effective beating. But the amount of water will be increased during rinsing, so don't worry about the final result.

The above is the detailed content of What should I do if the door of TCL drum washing machine cannot be opened?. For more information, please follow other related articles on the PHP Chinese website!