Ubuntu on Linux mounts a 3T hard disk or a disk larger than 2T

This article mainly introduces you to the method of mounting a 3T hard disk or a disk larger than 2T in Ubuntu. The editor thinks it is quite good. Now I will share it with you and give you a reference. I hope it can help you.

1. Display the hard disk and its partitions. Enter the following command in the terminal window

fdisk -lu

You can see the 3T disk to be mounted

because of the fdisk partition The maximum is only 2T, so parted is used here to partition.

Execute the command parted /dev/sdc

Because the MBR partition table does not support a capacity greater than 2.2TB (2.2 × 1012 bytes) partition, so some BIOS systems use GPT partition tables instead of MBR partition tables in order to support large-capacity hard disks.

Execute fdisk -l, you can see the sdc1 partition

##Format partition

mkfs.ext4 /dev/sdc1

Mount the partition

mkdir /media/sdc1

cat/ etc/fstab

/dev/mapper/ubuntu--vg-root /        ext4  errors=remount-ro 0    1
/dev/mapper/ubuntu--vg-swap_1 none      swap  sw       0    0
/dev/sdb1        /media/sdb1       ext4  rw       0   0
/dev/sdc1        /media/sdc1       ext4  rw       0   0

About ubuntu setting up php development environment example tutorial

php Ubuntu server setting method

How to install yaf extension on Ubuntu

The above is the detailed content of Ubuntu on Linux mounts a 3T hard disk or a disk larger than 2T. For more information, please follow other related articles on the PHP Chinese website!