Windows 11 Keeps Assigning Drive Letter to Recovery Partition
You may be used to Windows automatically changing the name of an external hard drive or USB drive, but what happens when a recovery partition that was supposed to be used in an emergency suddenly becomes a writeable drive with a separate drive letter?
This article will guide you how to restore the recovery partition to its original state.
Unseen friends
If you find that the recovery partition suddenly behaves abnormally and no longer performs its original duties, you may be confused. Windows automatically creates a recovery partition to restore the operating system to its previous normal state (or factory settings) if there is a serious system problem. This partition contains the Windows Recovery Environment (WinRE).
This is a very useful partition. As shown in the above image, it is usually at the end of the main hard drive, immediately following the EFI partition. In normal disk configuration, only the primary partition will be assigned a disk letter.
But what should I do when this rule is broken?
What to do when Windows 11 keeps allocating drive letters for recovery partitions
If the recovery partition suddenly has a drive letter and appears in File Explorer, it is likely due to the loss of hidden attributes. The partition is no longer hidden or not mounted. It is also possible that the system update or disk cloning operation has modified the metadata of the hard disk. The data in this partition is crucial and must not be overwritten or deleted. Let’s take a look at several solutions below.
Remove the drive letter from the command prompt
Command Prompt is a versatile tool. Today we will use it to remove the drive letter of the recovery partition. The operation steps are as follows:
Step 1 : Open the "Run" dialog box (Win R), enter "cmd", and press (Ctrl Shift Enter) to run as administrator.
Step 2 : Enter "reagentc /info" and press "Enter" to view the status and location of WinRE. If the partition location ("Windows RE Location:") shows the drive letter rather than the partition number, it needs to be repaired.
Step 3 : Enter "diskpart" in the command prompt and start the DiskPart tool.
Step 4 : Enter "list volume" to view all volumes on the current computer.
Step 5 : If you see the recovery partition listed in it with a drive letter, enter "select volume [number]" to select the volume.
Step 6 : Enter "remove letter" to remove the drive letter of the partition.
If you cannot see the recovery partition at the volume level, you need to go deep into the partition level:
Step 1 : Enter "list disk" in DiskPart and press "Enter".
Step 2 : Enter "select disk [number]" to select the disk containing the partition.
Step 3 : Enter "list partition" to view all partitions.
Step 4 : Find the partition marked "recovery" in the "Type" column. If there is a drive letter, enter "remove letter" to remove it.
Hide drive
If you find that the recovery partition appears repeatedly, it is recommended to hide it in case the file is miswritten. Here is how to hide using the command prompt:
Step 1 : Enter "diskpart" in the command prompt to start the tool.
Step 2 : Select the target partition (as described above), and enter "set>
Step 3 : Enter "gpt attributes=0x800000000000000001" and set the recovery partition to hidden and read-only.
Step 4 : Once completed, the partition will no longer appear in File Explorer.
Uninstall the drive
You can also hide the drive by uninstalling it. The method is as follows:
Step 1 : Open the command prompt, enter "mountvol [Drive Letter]: /d" and press "Enter".
Step 2 : Check if the drive has disappeared from File Explorer.
The above is the detailed content of Windows 11 Keeps Assigning Drive Letter to Recovery Partition . For more information, please follow other related articles on the PHP Chinese website!

Hot AI Tools

Undress AI Tool
Undress images for free

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Clothoff.io
AI clothes remover

Video Face Swap
Swap faces in any video effortlessly with our completely free AI face swap tool!

Hot Article

Hot Tools

Notepad++7.3.1
Easy-to-use and free code editor

SublimeText3 Chinese version
Chinese version, very easy to use

Zend Studio 13.0.1
Powerful PHP integrated development environment

Dreamweaver CS6
Visual web development tools

SublimeText3 Mac version
God-level code editing software (SublimeText3)

When Windows cannot detect a second monitor, first check whether the physical connection is normal, including power supply, cable plug-in and interface compatibility, and try to replace the cable or adapter; secondly, update or reinstall the graphics card driver through the Device Manager, and roll back the driver version if necessary; then manually click "Detection" in the display settings to identify the monitor to confirm whether it is correctly identified by the system; finally check whether the monitor input source is switched to the corresponding interface, and confirm whether the graphics card output port connected to the cable is correct. Following the above steps to check in turn, most dual-screen recognition problems can usually be solved.

When encountering the problem of printing task stuck, clearing the print queue and restarting the PrintSpooler service is an effective solution. First, open the "Device and Printer" interface to find the corresponding printer, right-click the task and select "Cancel" to clear a single task, or click "Cancel all documents" to clear the queue at one time; if the queue is inaccessible, press Win R to enter services.msc to open the service list, find "PrintSpooler" and stop it before starting the service. If necessary, you can manually delete the residual files under the C:\Windows\System32\spool\PRINTERS path to completely solve the problem.


There are three main ways to install Android applications in Windows 11: First, enable WindowsSubsystem for Android (WSA), and install "AmazonAppstore" through Microsoft Store to download pre-compatible applications; second, use third-party Android emulators such as BlueStacks and NoxPlayer to support Google Play Store or directly drag into APK files to install; third, use APKInstaller or adb commands to install through WSA supporting tools or command line, which is suitable for advanced users. Different methods are suitable for different scenarios. Official recommendation WSA AmazonAppstore

When encountering the "DPCWATCHDOGVIOLATION" blue screen error, 1. First update or roll back the driver, especially graphics card, network card and motherboard driver, you can use the device manager or manufacturer tools; 2. Disable or uninstall third-party antivirus software and use WindowsDefender instead; 3. Check the storage device and driver, update the SSD firmware or replace the AHCI driver; 4. Disable the CoreIsolation function to eliminate system settings conflicts, and in most cases, try these methods in order to solve the problem.

To run CMD as an administrator, you can do it through three methods: Start menu, Win X menu, or Create Shortcuts. First, after searching for "cmd" in the start menu, right-click and select "Run as administrator"; secondly, press the Win X key and select "Command Prompt (Administrator); finally, create a new shortcut to cmd.exe, and set "Run as administrator" in the properties. If you encounter insufficient permissions, you need to check whether the account is an administrator group, group policy restrictions or contact the IT department. These three methods are applicable to different operating habits and scenarios, ensuring the safety of the system while meeting management needs.

Google has launched a browser extension called "PasswordCheckup" to help users determine whether their passwords are in a secure state. In the future, this password leakage detection feature will be a default feature of Google Chrome, not just limited to optional extensions. Although the PasswordCheckup extension provided by Google can automatically detect the password security used by users when logging into different websites, interested users can still experience it in advance by downloading the ChromeCanary version. However, it should be noted that this function is turned off by default and users need to turn it on manually. Once the function is enabled, users can know the login they entered when logging in on non-Google sites.

Read our disclosure page to find out how can you help MSPoweruser sustain the editorial team Read more123Movies used to be a go-to destination for free online movie streaming, but it came with serious downsides — from aggressive pop-up ads and potent
