Discover How to Fix Drive Health Warning in Windows Settings

Windows System Disk Health Warning: How to deal with disk warnings?

This article will guide you step by step to deal with disk health warnings that appear in Windows settings, such as "Disk Set to Read Only", "Reliability Decreased", or "Insufficient Alternative Space" error messages. These warnings usually indicate a failure of your solid-state drive (SSD) or mechanical hard drive (HDD), or some of the storage device's functions are limited, there may be a large number of bad blocks or bad sectors, and the disk life is about to end.

After receiving such warnings, you should take the following measures:

Step 1: Backup the file immediately

Since disk health warnings indicate that the disk may be corrupted at any time, the first step is to back up all important data immediately to prevent data loss or corruption. If you can still access the disk and edit the files, you can copy and paste the important files directly to the external disk.

If the number of files on the disk is large, it is recommended to use professional data backup software, such as MiniTool ShadowMaker. It can easily back up files, folders, partitions, and entire disks.

Step 1: Start MiniTool ShadowMaker and click "Continue Trial" to enter the main interface.

Step 2: Go to the Backup tab. You need to select the file/partition to back up in the Source section and select the destination location where you can save the backup file in the Destination tab.

Step 3: Click the "Back Up Now" button in the lower right corner and wait for the process to complete.

Step 2: Check for disk errors

After backing up the file, you need to check the disk health status and try to repair it. You can use the command line tool to check the SMART status.

Step 1: Enter "cmd" in the Windows search box, right-click "Command Prompt", and select "Run as Administrator".

Step 2: Enter wmic diskdrive get status in the command prompt window and press Enter. Displaying "OK" means that the hard disk SMART is in good condition, and "Pred Fail/Unhealthy" means that the hard disk is about to fail.

If there is a problem with the disk, you can use the built-in error checking tool to scan and fix file system errors.

Step 1: Open "File Explorer" and enter the "This Computer" section.

Step 2: Right-click on your hard drive and select Properties.

Step 3: In the new window, go to the Tools tab and click Check.

Additionally, you can run surface tests for free using the professional disk management tool MiniTool Partition Wizard, scan for bad sectors in the disk and mark them with red blocks. After the test is completed, if a large number of red blocks appear, the disk should be replaced as soon as possible.

Additional tip: Recover lost files without backup

If the disk fails and the files are lost, is it possible to recover files without a backup? You can try MiniTool Power Data Recovery. Its free version allows you to check if the disk is detectable and if the required files can be found, and supports free file previews for most file types, as well as free recovery of 1GB of files.

in conclusion

Disk health warnings in Windows settings usually indicate that your hard drive is about to be damaged. You should back up or transfer files immediately and then try to repair the disk. If the drive is severely damaged, you need to purchase a new hard drive.

The above is the detailed content of Discover How to Fix Drive Health Warning in Windows Settings. For more information, please follow other related articles on the PHP Chinese website!