How to connect two computers with one network cable to share files

Confused about how to share files between two computers through one network cable? PHP editor Xigua will relieve your worries! This article will detail two possible methods, from the simplest LAN mode to more advanced shared folder settings. If you need to share files conveniently and quickly, please continue reading the following content, we will take you through the operation step by step and solve your problem!

1. How to use one network cable to connect two computers for file sharing

Choose the appropriate network cable

To connect two computers, you first need to choose the appropriate network cable. In this case, you need to use a crossover cable, also known as a direct-connect cable or a NIC-to-NIC cable.

Connect two computers

Plug one end of the crossover network cable into the network card socket of computer 1, and the other end into the network card socket of computer 2.

Configure the network

On Computer 1, right-click the "Network" icon, select "Open Network and Sharing Center", click "Change Adapter Settings", then right-click the Ethernet connection, select "Properties" and find "Internet Protocol" Version 4 (TCP/IPv4)" and double-click, select "Use the following IP address", and enter the IP address and subnet mask. Perform similar configuration on Computer 2, but the IP address needs to be in the same network segment as Computer 1 but not repeated.

File Sharing

Now that the two computers have been connected together through a network cable and configured with IP addresses, files can be shared between the two computers. Find the folder you want to share in "File Explorer", right-click it, select "Properties", switch to the "Sharing" tab, click the "Share" button, and then set the sharing method and permissions.

Test the connection

After completing the above steps, the shared folders should be accessible to each other on both computers. You can try accessing a shared folder on another computer from one computer to make sure the connection and file sharing settings are successful.

With this method, you can easily connect two computers with one network cable and share files between them. This is very useful for some temporary scenarios where files need to be transferred temporarily or there is no available network.

Thank you for reading this article, I hope you can find the help you need. If you have any questions or need further assistance, please feel free to contact us.

2. How to connect two computers with one network cable?

Materials/Tools: Two computers, network cables 1. First, connect the two computers with network cables, and double-click Network Places on the computer desktop. 2. Then, find the local area connection, right-click and select Properties. 3. Select the TCP/IP protocol and click Properties. 4. Enter the IP address. Enter 192.168.1.100 255.255.255.0 for one computer and 192.168.1.101 255.255.255.0 for the other computer. Both computers will be able to connect to the Internet.

3. There is a network cable coming from the router at home. How to connect two computers?

The simplest method, no need to run wires, no need to buy a switch, the router only needs a Wifi signal, connect a network cable directly to the computer, buy an external wireless network card on the other computer and install it, wirelessly connect to the network, this wireless network card is good .

Small and convenient, you can also solve simple network connection problems by yourself

I hope it can help you.

If you have any other needs, please read my other articles on recommended computers, which will save you a lot of detours.

What cost-effective digital products are worth recommending on 618 in 2022?

I am studying environmental art design and want to buy a laptop with a budget of about 5,000. Please give me a serious answer! ?

Overview of the application of various plug-in interfaces and adapter cables for home computers (with purchase links)

Big data major, I want to buy a laptop, i7, 32g+1T, and the budget is within 9000, any recommendations?

Please recommend notebooks, fellow friends! ! ?

My budget is about 7,000, please recommend a desktop machine?

What home appliances/mobile phones/computer digital products are the best value to buy on JD.com 618 this year?

Looking for recommendations for office computers and printers?

I have a budget of 5,000 to give my mother a laptop. Do you have any recommendations?

Do you have any recommendations for solid state drives for playing games? Is 1T or 2T necessary? ?

4. How to connect two computer mice with one network cable?

Use a network cable to connect two computers into a network, so that the resources of the two computers can be shared. His connection method is to press the 1236 4 wires of the crystal head at one end. At the other end, connect the crystal heads in the reverse order of 3612, so that when the transmitting end of one end reaches the other end, it becomes the receiving end and the transmitting end of the other end becomes the receiving end in this section and the data can be exchanged

5. How to set up two computers connected with one network cable?

Materials/Tools: Two computers, network cables 1. First, connect the two computers with network cables, and double-click Network Places on the computer desktop.

2. Then, find the local area connection, right-click and select Properties.

3. Select the TCP/IP protocol and click Properties.

4. Enter the IP address. Enter 192.168.1.100 255.255.255.0 for one computer and 192.168.1.101 255.255.255.0 for the other computer. Both computers will be able to connect to the Internet.

6. Two computers connected with one network cable cannot ping?

Possible reasons:

1 Network cable problem. Check whether the wiring is intact and complete. Check the data path status with a line tester.

2 Operating System Are both computers running WINDOWS? If you have a LINUX operating system, you need to enable the ICMP response function.

3 When setting up the network, specify the IP of computer 1 as 192.168.0.2, the IP of computer 2 as 192.168.0.3, and the subnets as 255.255.255.0. Do not specify other options (do not specify the default gateway, DNS server, etc.)

The above is the detailed content of How to connect two computers with one network cable to share files. For more information, please follow other related articles on the PHP Chinese website!