The computer optical drive cannot be opened, causing many users a headache. As a common external device, optical drives are often used to read and burn optical discs. When it fails, it not only affects work efficiency, but also brings inconvenience to entertainment. PHP editor Xigua has sorted out the common reasons and solutions for why the optical drive cannot be opened, and explained in detail the troubleshooting of hardware, software and system settings. Through the detailed interpretation of this article, you will master the skills to comprehensively solve the problem of the optical drive not opening, quickly restore its normal use, and avoid more troubles.
The specific steps to solve the problem that the computer CD driver cannot be opened are as follows:
1. Taking win10 as an example, enter the control panel in the lower left corner of the win10 computer.
2. Find Device Manager in Control Panel.
3. Find the DVD/CD-ROM in the device manager and double-click it.
4. The status is found to be that the device has been disabled. Click to enable the device.
5. The equipment is operating normally. You can open your computer's CD-ROM drive.
Extended information:
Optical drive: Optical drive, a machine used by computers to read and write the contents of optical discs, is also a common component in desktops and laptops. As multimedia applications become more and more widespread, optical drives have become standard configurations in many computer accessories. Optical drives can be divided into CD-ROM drives, DVD optical drives (DVD-ROM), COMBO, Blu-ray optical drives (BD-ROM) and recorders, etc.
The inability to eject the optical drive is usually caused by hardware failure. You can try the following methods to solve it. Solution 1: Send it to a professional optical drive repair center and replace the ejection key; or use "My Computer" to right-click "Optical Drive Letter" and select "Eject" for emergency use; (This solution is only for the failure of the optical drive ejection key.) Option 2: The optical drive panel is designed with an emergency evacuation hole. Once the optical drive fails and cannot eject the disk, you can use a hard object such as a paper clip or a toothpick to insert it into the emergency evacuation hole (force is required), and the optical drive tray will eject. Pop out a small part and then pull out the tray by hand. Some brands of machines may need to pull down the small optical drive bezel on the chassis to see the real optical drive panel. The real optical drive panel should have the brand logo on it;
The inability to eject the optical drive is usually caused by hardware failure. You can try the following methods to solve it. Solution 1: Send it to a professional optical drive repair center and replace the ejection key; or use "My Computer" to right-click "Optical Drive Letter" and select "Eject" for emergency use; (This solution is only for the failure of the optical drive ejection key.) Option 2: The optical drive panel is designed with an emergency evacuation hole. Once the optical drive fails and cannot eject the disk, you can use a hard object such as a paper clip or a toothpick to insert it into the emergency evacuation hole (force is required), and the optical drive tray will eject. Pop out a small part and then pull out the tray by hand. Some brands of machines may need to pull down the small optical drive bezel on the chassis to see the real optical drive panel. The real optical drive panel should have the brand logo on it;
Method/step-by-step reading
1
/6
Find the "Computer" icon on your computer.
2
/6
Right-click and a box will appear, click Manage.
3
/6
Find Device Manager and click Device Manager.
4
/6
Find the DVD/CD-ROM drive in the right frame.
5
/6
Double-click the driver device
6
/6
Click "Enable Device", then click Next, then open the computer and there will be an optical drive icon.
1. Wipe the laser head with a dry cotton swab
Press the eject button of the optical drive to open the optical drive. Use an absorbent cotton ball or cotton swab to gently wipe the lens of the laser head. Even if it is not used for a long time, a lot of dust will accumulate on the optical drive lens due to dust accumulation inside the notebook. If you scratch the optical drive tray with your finger, your fingertips will be covered with dust.
2. Use absolute alcohol to clean the laser head
If the first step doesn’t work, you need to do something serious and wipe the laser head lens with some absolute alcohol, and then clean it with pure water (do not use tap water) , and finally dry. Be careful not to let liquid drip onto the circuit board during this process.
The reasons why the external optical drive cannot be connected to the computer:
1. The computer lacks the device driver or the port is disabled.
2. Using a USB cable that is too long will cause large line losses and lead to insufficient power supply for USB devices.
3. The computer USB port has insufficient 5V power supply capability.
4. The computer USB socket has poor contact or the USB device plug or cable is loose. Solution to the problem that the external optical drive cannot be opened when connected to the computer: 1. Open the device manager--Universal Serial Interface--usb--see whether a new usb label will pop up when a USB device is inserted, right-click it and set it-enable. Or uninstall it, unplug it and reinstall the system. If the new usb label does not pop up, it may have been uninstalled. In the control panel - add new hardware - find and enable it or "make this device run normally". 2. Check the USB internal wiring of the machine, use other USB sockets, use external power supply, etc.
First check whether it is stuck. Insert a small needle into the small hole at the entrance of the optical drive. If the optical drive still cannot be opened after insertion, reinstall the optical drive to see if the main nut is stuck or there is insufficient oil. If it still cannot be opened after installation. , you can put the optical drive into another computer and try. If the optical drive can come out, it means that there is a problem with the optical drive power interface and the IDE slot itself. If the optical drive still cannot come out, you can try a new optical drive. 8. The computer cannot The CD-ROM drive cannot be opened even after startup. How to solve the problem?
9. CD drive and computer What is the difference between optical drives?
Normally speaking, optical drives refer to the drives used on computers to read optical discs, so it generally refers to 2,
If it is 2, it is a type of computer optical drive. It can only read CD discs with a capacity of only 600 to 700 M. Later DVD drives have at least more than double the capacity and are compatible with CD drives and can read DVD disks and CD disks.
If it is 1, then the CD player is a professional appliance that plays music and can only play CD music disks. Its upgraded product is a VCD player and then upgraded to a DVD player. The optical drive on the computer can read all data disks. In fact, CD, VCD, DVD, etc. are all a category of data disks, and they are only used to store music and video data.
It’s been my understanding for a long time. I may not have explained it clearly to you. If you have any questions, please ask.
10. Is there an external optical drive for the computer?
1. Purchase an external optical drive product that is compatible with computer interfaces, such as USB interface or Type-C interface.
2. Connect the external optical drive to the computer through USB interface, Type-C interface, Bluetooth, etc.
3. After connecting the external optical drive, the computer will automatically detect the external optical drive and automatically install the driver.
4. Put the disc that needs to be read or burned into the external optical drive, wait for the computer to detect the disc, and then complete the relevant operations on the computer.
It should be noted that when using an external optical drive, it is best to connect the power adapter for power supply, because high power consumption operations such as burning discs will consume the battery faster. At the same time, in order to protect the external optical drive, do not forcefully insert or remove the disc, and try not to move the external optical drive to avoid mechanical damage and data loss.
The above is the detailed content of Can't open the computer's CD-ROM drive?. For more information, please follow other related articles on the PHP Chinese website!