Lenovo laptop cannot connect to wireless network, this is a common problem encountered by some users. PHP editor Zimo takes you through the potential causes of this problem and how to solve it. The details below will provide a step-by-step guide to help you quickly resolve this issue and enjoy a smooth wireless network connection.
It may be that the wireless network is disabled, you can try to turn on the wireless network in the computer system:
1. After turning on the computer, click "Start" -> "Run", enter "services.msc" and click "OK". Open the Windows service list: Find and double-click Wireless Zero Configuration in the service list, change the startup type to "Automatic", click "Apply", then click "Start" under the service status, and then click "OK".
2. "Start" -> "Control Panel" -> "Network Connection", right-click "Wireless Network Connection", there are three tabs in the frame, namely "General" and "Wireless Network Configuration" and "Advanced", enter the "Wireless Network Configuration" tab, check the box in front of "Use Windows to configure my wireless network settings", and then click "OK".
3. "Start" -> "Control Panel" -> "Network Connections", right-click "Wireless Network Connections" and select "View Available Wireless Connections".
1. Open the computer's "Control Panel", click "Network Connections", select Local Area Connection, right-click the Local Area Connection icon and select "Properties", double-click "Internet Protocol (TCP/IP)" in the "General" tab, Select "Use the following IP address", fill in "192.168.0.1" in the IP address, fill in 255.255.255.0 in the subnet mask, leave the others blank, and then click "OK". It should be noted that the IP must be in the same network segment as the Modem’s IP address.
2. In addition, in the above steps, you can also remove the option "Notify me (M) when this connection is restricted or has no connection" in the "Properties" of "Local Area Connection".
The reason why the tablet shows that it cannot connect to the wireless network and the solution are as follows
The first method: click on the settings in your tablet, backup and reset, and then reset your tablet, which is the so-called factory reset. But the apps you downloaded on your tablet are gone, just like when you bought it. Hope it helps.
Second method: Check whether the name of the connected router is correct, restart the routing, or manually set a static IP.
Third method: If there is no problem with the router. The reason may be related to the tablet's hardware and software. First, let's eliminate software problems. If your tablet system is Android, you can try to restore the factory design and turn off the Bluetooth function. Turn on WIFI again. If you still can't connect, it may be related to the hardware. Speaking of hardware, first of all, the connector of the WIFI antenna is very unreliable during assembly. You can try opening the fuselage to see if it is connected properly.
1. When connecting to a wireless network, when the prompt "Windows cannot connect to the hotspot" appears, it means that the hotspot verification password entered is incorrect. At this time, right-click the wireless hotspot and select the "Properties" item from the pop-up menu.
2. Then enter the correct "Network Installation Key" and try to connect to the hotspot WiFi network again.
3. When the wireless network connection fails, we need to obtain the "Wireless Router Assigns IP Address" method from the network administrator, and then make the following settings. Click the "network icon" in the lower right corner of the taskbar and click the "Open Network and Sharing Center" button.
There is a red cross when the computer is connected to wifi. You can first confirm whether the wireless switch is turned on. You can press the FN+F2 shortcut key combination to turn on the wireless switch, or confirm whether the wireless service is turned on. You can click Run in the start menu, or you can open and click Start. Menu-Control Panel-Network and Sharing Center-Manage Wireless Network, delete the network, then close and reopen the wireless connection test.
1. First, check whether the wifi switch on the computer is turned on;
2. Then right-click on My Computer and click Device Manager;
3. Then select the network adapter and see if the network card driver is good;
4. If the wireless network card is not enabled or the driver is not installed, enable the wireless network card or install the wireless network card driver. The wireless network card driver can be downloaded, copied and installed.
1) If it is a problem with the broadband itself, first directly connect the broadband network cable to test. If it is a problem with the broadband, contact the broadband customer service to solve it.
2) If it is a problem with the router, if it used to work but cannot be used temporarily, my own practice is to cut off the power of the router, plug it in, and wait and see. If you have it, you can restore the factory settings and strictly follow the instructions to set it up again. If you don’t understand it, it is not recommended to set it up by yourself (this is under the premise that the physical connection is correct, sometimes it is caused by the router being slow or failing to find the IP address, and It’s not that the router is broken). If you still can't solve it, it is recommended to call the customer service of the router. They have online guidance by phone. I encountered a problem that I couldn't solve myself. It is very useful to consult their suggestions. They will give you the correct settings or operations. Suggested.
3) If you turn off the wireless switch, just turn it on. If you use software to connect wirelessly, it is normal that the software is not easy to use and often has problems. If there is no better way, use a router. In addition, it is caused by the lack of or inappropriate network card driver, whether there is a problem with the network cable interface or the network cable, etc.
4) If it is caused by a system problem, it is recommended to restore the system or reinstall it.
Check whether the broadband account password is correct: Nowadays, most families use broadband as the Internet connection method, and using broadband requires an account name and password. You need to check to see if they are correct. If you forget your broadband account and password, you can call Customer service hotline.
Check whether the wireless password is correct: Many people use laptops to access the Internet wirelessly. In order to prevent network corruption, they will add a password when turning on the wireless device. When using wireless networking, you need a wireless password. Check to see if you entered it yourself. The wireless password is incorrect and cannot connect to the network.Steps:
1. Turn on the hotspot function of your phone.
2. Set the mobile hotspot password.
3. Turn on the tablet’s wifi.
4. Search for connectable wifi hotspots and find the mobile phone hotspot you just opened.
5. After clicking Connect, enter the set password to connect to the hotspot.
Solution 1 for Lenovo notebooks that cannot connect to the wireless network:
Laptop wireless network is often restricted. The reason may be the compatibility of the network card and router with the latest Win8.1 operating system. It is recommended that you adopt the following methods. Operation:
First, turn off the automatic power saving option of the wireless network card. Click "Device Manager", select "Wireless Network Card Properties", click "Power Management" and uncheck the "Allow the computer to turn off this device to save power" option.
Second, enable "Federal Information Processing Standards (FIPS) Compatible" to enhance network compatibility. Right-click the connected AP signal, select "View Connection Properties", click "Security", "Advanced Settings", and check "Enable Federal Information Processing Standards (FIPS) Compatibility".
Third, roll back the wireless network card driver. Select "Device Manager", right-click and select "Wireless Network Card Properties", click "Driver" and select "Roll Back Driver".
Solution 2 for Lenovo laptop not being able to connect to the wireless network:
If the driver is installed correctly, the problem of the laptop not being able to connect to the wireless network is usually caused by incorrect wireless network settings. Just adjust the wireless Internet settings of your laptop according to the following conditions.
Step 1: If the prompt "Windows cannot configure this connection" appears when you click to refresh the network list, open the "System Optimization" function of Kingsoft Guardian, click the "Boot Acceleration" tab, click "Service Items", and select the lower left Click "Show prohibited items" in the corner, then find "Wireless Zero Configuration (Wireless Configuration Service)" in the list, and click "Turn on" on the right. Then in Start-Run, enter net start wzcsvc and press Enter. The symptoms of laptop wireless network failure can be solved.
Step 2: If the wireless network cannot be found, you need to check whether the wireless network hard switch of the notebook is turned on. After turning on the hardware switch of some notebooks, you still need to use the Fn key + F5 key in the lower left corner of the keyboard to turn it on (specific models vary, you can find the wireless graphics in the blue function icons at F1-F12). Some Lenovo notebooks need to turn on the power management software to make the wireless switch on the keyboard work properly, so make sure to install power management and go to "Boot Acceleration" - "Startup Items" in Kingsoft Defender (also check "Show Startup Disabled" in the lower left corner "Project") to enable the startup of the power management utility.
Step 3: If the switch is on but the wireless network is still not found, right-click the wireless network icon in the tray in the lower right corner, click "Open Network Connection", then right-click the wireless network icon in the open window and click "Properties". Click the "Wireless Network Configuration" tab, check "Use Windows to configure my wireless connection settings" and click "OK", then open "View available wireless connections" again to see if it works.
Step 4: If the wireless network can be found, but the webpage cannot be opened after connecting, then also open the properties of the wireless network connection, and in the middle white box under the "General" tab, find "Internet Protocol (TCP/IP)" ", select, click "Properties" to see if the IP address and DNS configuration are correct. Generally, they are set to "Obtain IP address automatically" and "Obtain DNS server address automatically".
The above is the detailed content of Lenovo computer can't connect to wireless network?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
