How to install BenQ computer? If you're having trouble installing your BenQ computer, you've come to the right place! PHP editor Yuzai will introduce the installation steps of BenQ computer in detail in this article, from hardware connection to software settings, guiding you step by step through the entire process.
What’s special about BenQ monitors? Just use the video cable VGA to connect the computer's video interface and the monitor's interface, power on, and turn it on.
BenQ computer needs to be connected to the power cord, and then click the power button on the left to turn it on
Press and hold the power button in the upper left corner of the notebook for 10 seconds, and the computer will automatically restart.
You need to install the Pinyin input method first, and then press the input method switch key (win10 default is win+space) to switch
Click the windows icon in the lower left corner, enter settings, click to enter the device
2
/4
Select Bluetooth
3
/4
Enter the management Bluetooth interface, turn on the Bluetooth button, you can see in the search , you can set up Bluetooth, and you can transfer files, etc. when connected to a Bluetooth device
4
/4
If the computer’s Bluetooth is turned on, you don’t need to open it from “Settings”, just click on the Bluetooth icon in the lower right corner, click "Show Bluetooth Devices" and "Add Bluetooth Devices" can open the Bluetooth management interface.
Step 1:
Start the system and enter the BIOS setup interface, then select "POWER MANAGEMENT FEATURES" and press Enter.
Find the "RESTORE ON AC/POWERLOSS" item in the power window, press Enter to enter, and then use the arrow keys to set its value to "POWER ON".
Step 2:
Select "RESUME ON RTC ALARM" and press Enter to enter, then use the arrow keys to set its value to "ENABLE"
Step 3:
Select "RTC ALARM DATE" and press Enter to enter, and then set Its value is set to "EVERYDAY", which means the same operation is performed every day. In the same way, set "RTC ALARM HOURS", "RTC ALARM MINUTE" and "RTM ALARM SECOND" to "07", "15" and "00" respectively. , which means that the boot time is "7:15:00" in the morning. After all settings are completed, press F10 to save and restart.
First confirm whether there is a wireless network card; then confirm whether the wireless network card driver is installed;
Confirm whether the small network icon at the bottom right of the screen can search for a signal;
If it can be found, click on the SSID of the wireless network to be connected and enter the password
First confirm whether there is a wireless network card; Then confirm whether the wireless network card driver is installed;
Then confirm whether the small network icon at the bottom right of the screen can search for a signal;
If it can be found, click on the SSID of the wireless network to be connected and enter the password
1. The brightness adjustment method of the laptop monitor is as follows: First, you need to look at the fn key on the keyboard and the two brightness signs (the signs are like a sun, brighten upwards and darken downwards). OK, these two logos of general handhelds are designed on F1-F12. You can find it if you look carefully, then press and hold the Fn key. If you want to make it brighter, press the upward logo. If you want To dim, hold down the Fn key and click the downward sign.
2. The contrast adjustment method is as follows: right-click on the empty screen, click Properties, click Settings in the prompt bar that appears, click Apply after setting the contrast, and then click OK.
3. Click the power button in the lower right corner, then find the power plan you are using in the power options that open, and click "Change Plan Settings" behind the power plan you are using. In the open Edit Plan Settings window, in the Adjust Plan Height window, moving to the left will make it darker and darker, and conversely, moving to the right will make it brighter and brighter. They are the brightness adjustment of the laptop screen when using the battery and when the power is connected. After the final settings are completed, click "Save Changes" to take effect immediately.
BenQ computer screen brightness can be adjusted by following these steps:
1. Find the menu button on your computer screen. This is usually a physical button located below or to the side of the screen.
2. Press the menu button and the menu options will be displayed on the screen.
3. Use the on-screen arrow keys or scroll wheel to select the "Brightness" option.
4. Press the "OK" button and then use the direction keys or scroll wheel to adjust the brightness.
5. After completing the adjustment, press the "Confirm" button to save the settings.
If your BenQ computer screen does not have a physical menu button, you can adjust it in the Windows operating system:
1. Click the notification area in the lower right corner of the desktop and find the "Notification Center" icon.
2. Click the "Notification Center" icon and select "All Settings".
3. In the "Settings" window, select "System".
4. Wählen Sie im Menü „System“ „Anzeige“.
5. Im Display-Menü können Sie mit dem Schieberegler die Bildschirmhelligkeit anpassen.
6. Schließen Sie nach Abschluss der Anpassung das Fenster „Einstellungen“.
Bitte beachten Sie, dass verschiedene BenQ-Computerbildschirme möglicherweise unterschiedliche Menüoptionen und Anpassungsmethoden haben. Wenn Sie die Menüschaltflächen nicht finden oder keine Anpassungen in Windows vornehmen können, lesen Sie bitte im Benutzerhandbuch Ihres BenQ-Computerbildschirms nach oder wenden Sie sich an den BenQ-Kundendienst.
The above is the detailed content of How to install benq computer?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
