Screen jitter is a problem that users often encounter when using computers, which can seriously affect the user experience. PHP editor Xinyi has compiled a detailed solution tutorial for everyone to solve this problem. The tutorial lists the causes of screen jitter and provides corresponding solutions, covering various solutions from hardware inspection to software settings. If you're experiencing a shaking computer screen problem, read on to learn how to fix it quickly.
Computer screen shaking is a common problem that may cause discomfort and visual fatigue to users. This problem is usually caused by hardware or software reasons, but fortunately in most cases it can be solved through simple methods. Let’s discuss in detail the causes of computer screen jitter and corresponding solutions.
Hardware problems are one of the main causes of screen shaking. For example, a faulty graphics card driver, quality problems with the monitor itself, or loose connection cables may cause screen jitter. In addition, software compatibility issues are also common causes. For example, some programs are incompatible with the operating system or graphics card driver, causing the screen to shake.
In addition, power issues may also be the cause of screen jitter. If the power voltage is unstable or the power supply is insufficient, it may cause screen jitter. There are also some environmental factors, such as electromagnetic interference, excessive temperature, etc., which may also cause screen jitter.
For different reasons, we can take the following solutions:
Check the hardware connection: Carefully check whether the connection cable between the monitor and the computer is loose, and replace the cable if necessary. Update your graphics driver: Download and install the latest version of your graphics driver, which can fix compatibility issues in the driver. Adjust monitor settings: Enter the monitor menu and try adjusting parameters such as brightness, contrast, refresh rate, etc. to see if the jitter problem can be solved. Check the power supply: Make sure the power voltage is stable and replace the power adapter if conditions permit. Close unnecessary programs: Close some software that may conflict with the display driver and see if that solves the problem. Reset the operating system: If none of the above methods can solve the problem, you can consider resetting the operating system, which can fix system-level compatibility issues.If the screen jitter problem still cannot be solved after the above steps, you may need to replace the monitor or graphics card. I hope these suggestions are helpful to you, and I wish you a happy use!
1. Right-click the Start button and select Task Manager.
2. Check if it flashes or flashes on Win10 system.
If it flickers, it proves to you that there is a display driver issue with the flickering screen on your Win10 system.
If not, it means the problem belongs to some application.
After you figure out what’s going wrong on your Win10 system, the screen will flash. You can start fixing it with custom methods.
Usually the memory module is loose or oxidized and has poor contact, or the monitor data cable is in poor contact, or the memory, graphics card, monitor or data cable is damaged.
Processing suggestions:
1. If the monitor is powered on but shows no signal, shut it down (if a short press of the power switch is ineffective, press and hold the switch until the power indicator light goes out or unplug the power cord directly), cut off the power, open the case, and plug it in again memory stick, and use an eraser to wipe the golden finger in one direction (scraping the back of your thumb and fingernail will also work). If possible, you can install it into a different memory slot. After installation, turn on the computer (before operating, you must also touch it with both hands) The wall releases its own static electricity or wear anti-static gloves). If you don’t know how to operate it, then it’s simple: just slap or kick the chassis once or twice (note the position: the center of the side of the left and right sides of the chassis that has no interface at the back; note: don’t use too much force, of course not powerless). The above may need to be repeated. If it is ineffective, the memory module needs to be replaced. If there are more than two memory sticks, you need to test them one by one.
2. If the above operation is ineffective, shut down the computer, open the case, re-insert and unplug the graphics card, and tighten the data cable between the monitor and the graphics card. If it still doesn't work, consider that the data cable or graphics card is damaged, then replace it with a new one.
3. If the host can display when connected to other monitors or the local monitor still cannot display when connected to other normal hosts, it means that the monitor is damaged and needs professional repair.
Computer screen jitter may be caused by a variety of reasons, including loose monitor cables, improper monitor refresh rate settings, and graphics card drivers problems, hardware failures, etc.
1. Check the monitor cable to make sure the connection is firm.
2. Adjust the refresh rate of the monitor, usually 60Hz is the best setting.
3. Upgrade or reinstall the graphics card driver to ensure the normal operation of the driver software.
4. Check for hardware failures, such as graphics card overheating, fan failure, etc.
1. Clean the inside of the computer regularly to prevent dust accumulation and poor heat dissipation of the graphics card.
2. Use professional monitor calibration tools to adjust monitor parameters to optimize the picture effect.
3. If the hardware failure is serious, consider replacing or upgrading hardware devices such as monitors and graphics cards.
Thanks for reading this article, I hope it can help you completely solve the problem of computer screen shaking.
Check whether your graphics card supports this mode, or your monitor. Personally, I think if your resolution is raised too high, the refresh rate will not be able to go up, so you will see jitter. Generally, the monitor should be set to 70 to The refresh rate is 75. Maybe your last mode has a refresh rate of only 60, so it looks a bit shaky.
Causes of computer screen jitter:
1. The monitor refresh frequency is set too low. When the refresh frequency of the monitor is set lower than 75Hz, the screen will jitter and flicker. If the refresh rate is appropriately increased, for example, set to higher than 85Hz, the screen jitter will generally not reoccur.
2. The power transformer is too close to the monitor and chassis. When the power transformer is working, it will cause large electromagnetic interference, causing the screen to shake. Place the power adapter away from the case and monitor.
3. The power supply or power supply equipment has aged. The components used in many off-brand computer power supplies are of poor workmanship and materials, which can easily cause the computer's circuitry to be blocked or the power supply capacity to fail to keep up. When the system is busy, the monitor screen may vibrate, especially when the system is busy. When the computer's power supply device begins to age, it is easy to cause the same problem.
4. The speaker is placed too close to the monitor. The magnetic field effect of the speakers will interfere with the normal operation of the display, causing the display to produce magnetic interference phenomena such as screen jitter and cross-color.
5. In addition, viruses and poor contact with the graphics card may cause the display image to shake.
6. Also, the CRT monitor will automatically degauss when it is started, which will cause the display screen to shake. However, under normal circumstances, it will return to normal soon, probably within 3 seconds.
The computer screen shakes and blurs because the graphics card driver is not updated
Reason 1 for computer screen jitter: The screen refresh frequency setting is incorrect
1. Setting the screen refresh frequency too low will cause the screen to jitter. You can try right-clicking a blank space on the desktop and selecting "Display Settings" to open it.
2. Pull down the display page, find and click "Advanced display settings".
3. Select "Display Adapter Properties of Monitor 1" below.
4. Switch to the "Monitor" tab. At this time, you can see that the refresh frequency of the monitor is "60Hz". Modify the refresh frequency here and observe whether there is screen jitter at different frequencies. Try it until it does not jump. .
Reason 2 for computer screen shaking: Incorrect graphics card driver
It may also be that the graphics card is incompatible, or the computer has reinstalled the system without installing the correct driver. The solution is to download and install the appropriate graphics card driver from the official website.
Three reasons why the computer screen shakes: Poor contact with the graphics card
Reseat the graphics card and see if the problem can be solved.
The solutions are as follows:
1. Electromagnetic interference. The most common thing is that the notebook will shake when it is connected to a power source, but it will be fine when it is not connected to a power source. Just need to replace a power adapter.
2. Impact of electricity consumption. This situation is caused by connecting electricity to the socket connected to the computer to boil water for cooking or using high-power electrical equipment such as a washing machine. This is very simple, just don't connect these high-power electrical equipment.
3. Influence of magnetic field. If your speaker has high power and weak anti-magnetic function, this situation is more likely to occur if it is placed next to the monitor. At this time, just move the magnetic material away from your computer.
4. The resolution is wrong. This problem is also common when a resolution that is not supported by the monitor is used. Usually just change it back to the correct resolution.
5. Graphics card problem. If it is a desktop computer and uses an independent graphics card, a loose or damaged graphics card will cause screen jitter. At this time, you only need to tighten or replace the graphics card.
6. Problems with the host itself. On inferior chassis, the host reasons cannot be ignored, and poor wiring leads to interference.
7. Connection line problem. Low-quality connecting cables have no shielding function and are easily affected when attached to the power cord. Even if there is no such effect, the low-quality connecting cable itself may cause this problem. At this point, just replace the connecting cable.
8. The display is aging. This is the last thing you want to see, but if none of the above methods can solve it, you should check whether the monitor is aging. Then just replace the monitor.
If you connect a display screen and the display screen shakes, it is a problem with the system or graphics card of the machine itself. If it does not shake, it is a problem with the laptop screen.
If there is no display, enter the bios and so on. If the bios shakes, the screen is broken. If the bios does not shake, there is a system problem.
The above is the detailed content of How to solve the problem of computer screen shaking?. For more information, please follow other related articles on the PHP Chinese website!
How to refresh bios
y460 graphics card switching
How to modify folder 777 permissions
Recommended easy-to-use and formal currency speculation software apps in 2024
setinterval usage
Set default printer
Solution to the problem that the input is not supported when the computer starts up
windows cannot start
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
