No sound from the microphone? Don’t worry, PHP editor Yuzai is here to help you! The problem of no sound from ASUS computer microphones has troubled many users. This detailed guide will dive into the common causes of this issue and guide you through troubleshooting step by step. From microphone settings to driver updates, this article will cover practical solutions to your no-sound microphone problem.
Causes and solutions for no sound from the microphone
1. We open "Control Panel" → "Hardware and Sound".
2. Open the managed audio device again.
3. In the "Sound" interface, we switch to the "Recording" tab and double-click "Microphone".
4. Click to switch to the "Level" tab to adjust the microphone volume to the maximum. If the microphone sound is not loud enough, we can also set the microphone to strengthen.
5. Pay attention to whether there is a "mute" option.
6. If the microphone is muted, turn off the mute.
Answer: The setting steps for Honor computer microphone to have no sound. The first step is to open the control panel and enter the hardware and sound management interface. Click the Start button, and a Control Panel option will appear on the right side of the Start menu. After clicking to enter, a Hardware and Sound option will appear, in which there are settings for the microphone.
Step 2 Click on the sound option to enter the settings about the microphone. There are options for microphones in the sound control panel interface, where we can activate our microphones. The recording interface in the menu bar is about the microphone settings.
Step 3: Enable the microphone device. If there is nothing in your recording interface, right-click the mouse and select Show disabled devices to see the microphone option. When the microphone selection appears, right-click and select Enable. After turning it on, you will find that your microphone icon has become active.
Step 4: Test whether the microphone is in normal use. Right-click the volume icon in the lower right corner of the desktop and select Record Sound. After entering, select the microphone icon, click the configuration button below to enter the microphone configuration interface, click Next, and follow the prompts on the voice input interface that appears to see if it responds. This is how to set up the Honor computer microphone to have no sound.
Select the audio call method in the general accessibility settings and check the speaker after entering.
The first step is to open the control panel and enter the hardware and sound management interface.
Click the Start button, and a Control Panel option will appear on the right side of the Start menu. After clicking to enter, a Hardware and Sound option will appear, where there are settings for the microphone.
The second step is to click on the sound option to enter the settings about the microphone.
The sound control panel interface has microphone options, where we can activate our microphone. The recording interface in the menu bar is about the microphone settings.
The third step is to turn on the microphone device.
If there is nothing in your recording interface, right-click the mouse and select Show disabled devices to see the microphone option. When the microphone selection appears, right-click and select Enable. After turning it on, you will find that your microphone icon has become active.
The fourth step is to test whether the microphone is in normal use.
Right-click the volume icon in the lower right corner of the desktop and select Record Sound. After entering, select the microphone icon, click the configuration button below to enter the microphone configuration interface, click Next. Next, in the voice input interface that appears, follow the prompts and say the words on the screen to see if it responds. If so, it means your microphone It's ready to use, if you can't go to step five.
Step 5, change the microphone settings in the audio manager.
Enter the Realtek HD audio management interface and uncheck Mute in the microphone option bar. If it is mute, there is a cross on the icon, and in non-silent mode there is only a small speaker.
Processing method:
1. Confirm whether the microphone jack is connected correctly.
2. Check whether the microphone is muted.
3. Confirm whether the sound card driver is normal.
4. If there is no problem with the settings, microphone, microphone and host connection, you need to check whether the microphone is broken. If it is, you can only buy a new one. 6. How to set up the microphone if the computer microphone has no sound and cannot record? ?
1. In the first step, we turn on the computer, then find a volume icon in the computer taskbar, right-click on it, as shown in the picture below.2. In the second step, after clicking it, it will pop up with many options, and then we need to find the option "Open Sound Settings", as shown in the picture below.
3、第三步，接著，我們進入到新頁面之後，可以看到一個「音量」按鍵。然後我們可以將音量調大或調小來試試麥克風是否有聲音。
4、最後一步，我們往下拉，可以看到「測試麥克風」這個選項，我們可以靠近麥克風來說幾句話，如果還不行只能點擊「疑難解答」來解決。
1、開始選項下開啟設定
2、點擊系統
3、點擊聲音
4、找到聲音的輸出和輸入選項進行聲音設定
5、最後拖曳滑桿，調整聲音主音量大小即可
你好。根據你的問題那就是說明你的麥克風驅動被攝影機佔據了。不能使用，你可以下載驅動精靈然後進行安裝各個驅動程式。
解決方法：
1、首先檢查下是不是耳麥插錯了
2、沒有插錯的，檢查下耳麥，看是不是損壞了
3、打開“控制面板”裡的“聲音” ;
4、點擊“錄製”，我們看到錄音設備關閉了;
5、右鍵點擊“麥克風”，選擇“啟用”;
方法二
1、右鍵點擊右下角喇叭，選擇。
2、點擊。
3、在介面中點選確定。
4、在的介面中透過拖曳麥克風調整聲音大小即可。
第一步，打開控制面板，進入硬體和聲音的管理介面.
點擊開始按鈕，在開始選單的右側會出現一個控制面板的選項，點擊進入後在裡面會出現一個硬體和聲音的選項，在這裡面就有關於麥克的設置.
第二步，點擊聲音的選項，進入關於麥克風的設置.
聲音的控制面板界面中有關於麥克風的選項，我們可以在這裡激活我們的麥克風.在選單列的錄製介面就是關於麥克的設定.
第三步，開啟麥克風設備.
如果你的錄製介面裡生麼都沒有那麼右鍵滑鼠，選擇顯示禁用的裝置即可看見麥克的選項了.出現麥克的選擇後右鍵選擇開啟即可.開啟後你就會發現你的麥克風圖標已經開始活動了.
第四步，測試麥克風是否已經正常使用.
右鍵下角的音量圖標，選擇錄製聲音.進入後選擇麥克風的圖標，點擊下面的配置按鈕進入麥克風的配置界面，點擊下一步下一步在出現的輸入聲音的界面按照提示說出屏幕上的話看其是否有反應，如果有則說明你的麥克已經可以使用了，如果不能看第五步.
第五步，更改音頻管理器中的麥克風設置.
進入Realtek高清音頻管理界面，將裡面的麥克風選項欄中的靜音取消勾選即可.如果是靜音則圖示上有一個叉號，非靜音模式只有一個小喇叭.
The above is the detailed content of How to set the ASUS computer microphone to have no sound?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
