Want to know how to set your computer’s IP address? PHP editor Yuzai brings you detailed strategies to help you solve problems easily. This article will introduce the concept of IP address, setting methods under different operating systems (such as Windows, macOS, Linux), and answers to some common questions. By reading the following content, you will master the steps to set an IP address and ensure that your device can successfully connect to the network.
1. Open the computer browser, enter the router login IP address, enter the router login interface, enter the router login account and password, and enter the router settings interface;
2. In the router status interface, you can view the current connection network status of the router, view wan port ip information, obtain subnet mask, preferred DNS address, backup DNS address information, view lan port information, obtain router default gateway ip information, and then record it;
3. Click Settings - Network Settings to view DHCP service settings , you can check the IP address range assigned by the router, and then record it;
4. Open the computer start menu-Control Panel-double-click Network Neighborhood-right-click Local Connection-Properties-Double-click the commonly used internet protocols-General-click Use the following IP Address. At this time, you can fill in the subnet mask, dns address, and default gateway that we recorded. For the local IP address, please fill in any IP in the router IP range we viewed.
Regarding this issue, if your computer is already connected to the Internet, then it already has a default IP address. If you need to set the IP address manually, you can follow the steps below:
1. Open "Control Panel" and select "Network and Sharing Center".
2. Click "Change Adapter Settings".
3. Select the network connection you are using, right-click and select "Properties".
4. In the "Network Properties" dialog box, select "Internet Protocol Version 4 (TCP/IPv4)" and click "Properties".
5. In the "Internet Protocol Version 4 (TCP/IPv4) Properties" dialog box, select "Use the following IP address" and enter the IP address, subnet mask and default gateway you need to set.
6. Click "OK" to save the settings.
Please note that before setting the IP address manually, please consult the network administrator to ensure that your settings will not affect the normal operation of the network.
You can set the IP address, mask, gateway, and dns in the Control Panel-Network Sharing Center-Change Adapter-IPv4.
Answer: The steps to set the computer IP address without conflict are as follows. 1. Right-click the network icon in the lower right corner of the desktop and select: Open Network and Sharing Center.
2. Click: Change adapter settings.
3. Right-click: Wireless Network Connection, select: Properties.
4. Select Internet Version Protocol 4 (TCP/IPV4) and click: Properties.
Method/step-by-step reading
1
/8
Open the start menu and click Options.
2
/8
Open the control panel and select.
3
/8
Open the Network Sharing Center and select Change.
4
/8
You can see the computer connection in the adapter setting interface
5
/8
Double-click the local connection to open the local connection status panel
6
/8
Click the button.
7
/8
Select Internet Protocol Version 4 (TCP/IPv4) in the properties panel and click the button
8
/8
Usually when we are connected to the Internet, the router turns on the DHCP service by default. At this time we select "Obtain an IP automatically". When we connect to someone else's LAN, or when the router is set to a static IP, we select the "Use the following IP address" option and enter the IP address, and click to complete the setting
Open the control panel. Click "Network & Internet."
Click "Network and Sharing Center".
Click "Change Adapter Settings".
Right-click on your Wi-Fi or Ethernet connection and click Properties.
Click "Internet Protocol Version 4 (TCP/IPv4)" and then click "Properties".
Select "Use the following IP address" and enter your IP address, subnet mask, and default gateway.
Click "OK" and close all open windows.
In Windows 7 system, the method to set the computer IP address is as follows:
1. Open the Network and Sharing Center: click the network icon in the lower right corner of the computer, and then select "Open Network and Sharing Center" in the pop-up menu.
2. Change adapter settings: In the Network and Sharing Center window, click "Change Adapter Settings" on the left.
3. Select Local Area Connection: In the Change Adapter Settings window, find and click the network connection you are using, such as "Local Area Connection".
4. Property settings: In the local connection window, click the "Properties" button above.
5. Select Internet Protocol Version (TCP/IP): In the Properties window, find "Internet Protocol Version (TCP/IP)" and click "Properties".
6. Set IP address: In the Internet Protocol Version (TCP/IP) properties window, enter your IP address, subnet mask, and default gateway respectively. You can refer to the following format:
IP address: 192.168.1.xx (xx is a number between 1-254)
Subnet mask: 255.255.255.0
Default gateway: 192.168.1.1
7. Confirm Settings: After the settings are completed, click the "OK" button to save the changes.
8. Restart the computer: After completing the settings, restart the computer to make the changes take effect.
It should be noted that if you are using a computer on a home network, it is recommended to automatically obtain an IP address to avoid IP address conflicts. In the above steps, you can skip step 6 and directly click "OK" to save the settings. Your computer will automatically be assigned an available IP address.
1) Click Start - Control Panel
2) Select "Network and Internet" -> View network status and tasks
3) Select "Network and Sharing Center" in the pop-up dialog box
4) Select Change adapter
5) Right-click the network connection you need to modify the configuration, select "Properties"
6) Then select "tcp/Ipv4", and click "Properties"
7) Change the automatic mode of IP/DNS "Use the following DNS server address" and fill in the corresponding IP address and DNS address (this address is related to the province where we are located. For example, Guangdong's is generally 202.96.128.86 or 202.96.128.166, while Jiangxi's is: 202.101.224.68 or 202.101.224.69, etc.), fill in and click OK
The IP address settings of your home computer can be set by entering the router management page. First, you need to connect the computer to the router, enter the router management address (usually 192.168.1.1 or 192.168.0.1), enter the router settings interface, find the LAN settings option, and select DHCP or manually assign an IP address.
If you choose manual allocation, you need to enter the IP address, subnet mask, gateway and other information under this option, and set up the DNS server.
Under normal circumstances, home computers can choose to automatically obtain an IP address and the router will allocate it. After setting, restart the computer and router to take effect.
1. Automatically obtain an IP address: After automatic acquisition, the DNS server can randomly assign the IP address to the host when the device is turned on. It will be automatically assigned to your device in the same network segment, suitable for home or dormitory, etc. Small group network use. The following solution requires the computer to be set to automatically obtain an IP;
2. The computer automatically generates an IP: The address of 169.x.x.x is an address belonging to APIPA and is generated by the computer itself. Generally, when these addresses appear, it means there is a problem with your computer's link and router or you cannot connect to the DHCP server. When the computer is turned on, it will automatically connect to the DHCP server and request the router to assign an IP. If the server does not respond, the computer will automatically generate an APIPA address. Unable to obtain IP address, DHCP needs to be turned on. The reason may be that the device is unstable or the line is poor, and the IP address needs to be set manually. If you cannot access the Internet manually, you can try to change the network cable or computer for detection. If necessary, you can reinstall the network card driver in the device manager;
3. DNS detection: 114DNS is based on the DNS systems used by multiple basic telecom operators. , through expansion, a professional third-party high-reliability DNS service platform has been built. You can try pinging 114.114.114. If there is data displayed later, it proves that the network is good and you need to check the computer settings. If "timeout" is displayed, check whether the network cable is plugged in properly, check whether the wireless connection is normal, and check whether the wireless switch is working properly. It is also possible that the computer is under ARP attack and needs to enable LAN protection. If the router is in session for a long time, there will be data congestion, so the router needs to be restarted. Finally, you can try turning off the firewall. If it still doesn't work, it's a peripheral problem;
4. Modem: Modem, also known as modem, is commonly known as "cat". When connecting to the computer, check whether the indicator light on the "cat" is on normally (some are flashing). You can use it as a "cat" for the router and log in to the backend (the address is at the bottom of the "cat") to check whether the settings are normal. You need to set up the computer's "broadband connection" to set up Internet access, and re-enter the "user name and password" given by the operator. If everything is normal, you need to contact the operator to check whether you forgot to pay, the operator's network is faulty, etc. If not, you need to report for repair;
5. Router: Enter the router to check whether the network connection is normal and whether the broadband account password is correct. Check whether the network cable access to the WAN port of the router is normal; reduce the broadband speed; change the IP address set by the LAN port; upgrade the router; automatically obtain the Internet connection method; clone the address if restricted by the broadband operator. You can restart the router, restore factory settings, etc. The broadband is directly connected to the computer. If there is a problem with the router, the router needs to be replaced.
The above is the detailed content of How to set the computer IP address?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
