Encountered a problem that your computer cannot start? Don’t worry, PHP editor Shinichi dedicated this guide to you! The article will deeply explore the reasons why the computer cannot enter the system and provide a series of effective solutions. From hardware issues to software failures, we'll analyze every aspect one by one to help you quickly diagnose and repair your system, bringing your computer back to life. Read on to solve your system startup troubles!
I know you don’t like to hear this, but there are really only three possibilities. The hard disk is broken and bad sectors appear, resulting in a blue screen of file reading errors. There is a problem with the memory slot. Reseat it. The final solution is to reinstall.
Bootsafe64.sys is the driver file of Kingsoft Antivirus. It seems that the driver is damaged or lost. Solution: Copy this driver from another computer with Kingsoft Antivirus installed, or delete Kingsoft Antivirus after starting in safe mode.
Recently, many users have reported that their computers have a "computer blue screen" problem, causing the "host" to be unable to enter the system normally. This problem has caused trouble to many users. What causes the computer to have a blue screen and the host to be unable to enter the system? In this article, we'll explore the possible causes of this issue and how to fix it.
There are many reasons for computer blue screen, it may be hardware failure or software problem. Here are some common causes of computer blue screens:
Hardware failure, such as problems with memory, hard drive, or other hardware. Drivers are incompatible or outdated, causing conflicts in the system. Improper software installation, such as unstable software. The system file is damaged and the system cannot be started normally.For the problem that the host cannot enter the system normally, we can try the following solutions:
Restart the computer, sometimes it is just a temporary system failure. Check whether the hardware is normal and eliminate the possibility of hardware failure. Update your drivers to keep them up to date. Start your computer in safe mode, find the problem, and fix it. Restore the system to the previous recovery point and restore the system to its normal operating state.In general, computer blue screens and the host being unable to enter the system are relatively common problems. Don’t be too panicked when encountering this situation. By carefully investigating the possible causes and following the correct approach, in many cases this problem can be resolved quickly. If you encounter a problem that cannot be solved, it is recommended to seek help from professional technicians in time to avoid causing greater losses.
During the use of the computer, sometimes the system cannot be entered in the background. This problem troubles many users. Today we will discuss the solution to the problem that the computer background cannot enter the system.
1. Check whether the hardware connection is normal
First, we need to check whether the computer hardware connection is normal. Sometimes, the inability to enter the system in the background may be due to a problem with the hardware connection. For example, the memory module is not inserted firmly and the memory cannot be recognized, or the hard disk connection cable is loose and the hard disk cannot be read, etc. Therefore, we can first unplug the computer's external connection cable and plug it in again to see if the problem can be solved.
2. Check for hardware failure
If the hardware connection is normal, then you need to rule out the possibility of hardware failure. You can try to insert the computer's memory module into another slot, or use a new data cable to connect to the hard drive to see if you can solve the problem of being unable to enter the system in the background.
3. Enter safe mode
Sometimes the computer cannot enter the system in the background because the system file is damaged or software conflicts. At this time we can try to enter safe mode to repair system files or uninstall conflicting software. The way to enter safe mode is to press the F8 or Shift key when booting and select Enter Safe Mode.
4. Restore the system
If none of the above methods can solve the problem, you can consider using the system recovery function. System recovery can restore the system to a previous point in time, thereby solving the problem of being unable to enter the system in the background. In Windows systems, the system recovery function can be found through the System and Security options in the Control Panel.
5. Use safe mode to repair
Sometimes some system file problems can be repaired in safe mode. You can enter safe mode and use the system's built-in problem diagnosis tool to repair it, or manually delete recently installed software and other operations to try to solve the problem of being unable to enter the system in the background.
6. Update the driver
Driver problems may also cause the background to be unable to enter the system. Therefore, you can try to update your computer's hardware drivers to ensure they are compatible with the system. You can find the driver that needs to be updated through the device manager, or download the latest driver from the hardware manufacturer's official website.
7. Check for virus issues
Viruses may also cause the computer to be unable to enter the system in the background. Therefore, you can use anti-virus software to perform a full scan on your computer to clean out possible viruses. Make sure your computer is not infected by viruses to ensure the normal operation of the system.
8. Reinstall the system
If none of the above methods can solve the problem of being unable to enter the system in the background, then the only solution is to reinstall the system. Before reinstalling the system, back up important data first, and then use the system installation disk or USB flash drive to reinstall the system. Reinstalling the system can restore the system to its initial state and solve problems such as system files.
In general, the inability to enter the system in the computer background may be caused by hardware failure, system file damage, virus infection, etc. By trying the above methods, I believe that the problem of being unable to enter the system in the background can be solved and the computer can run normally again.
This is because the motherboard CMOS battery is exhausted and the BIOS settings cannot be saved.
Just replace it with a CR2032 CMOS battery.
Now, you can just press F2 as prompted to boot the operating system while loading the default settings.
Hello, the Sony laptop cannot enter the system when it is turned on. You can try the following methods to solve the problem:
1. First check whether the computer has started to start the operating system when it is turned on. If it freezes, blue screen, or automatically restarts when starting the operating system, it means that the hard disk partition table and master boot record are normal, and the causes of the problem include damage to the hard disk partition table, damage to the hard disk master boot record, and loss of the hard disk partition end mark. Then use the following method to diagnose.
2. Start the computer in safe mode and see if it can start. If it cannot start, it may be due to virus infection, system file loss, operating system damage, bad sectors on the hard disk, conflict with hardware devices, or hardware problems; if it can start safe mode, it may be caused by the hardware driver being incompatible with the system, operating system problems, or virus infection.
3. Then run the anti-virus software. If there is a virus, it may be caused by a virus. Restart the computer after anti-virus. If it is still not normal, you need to reinstall the operating system.
If the computer cannot enter the system after being turned on, there may be several reasons: startup sequence problem, BIOS update, blue screen, black screen, etc. You can try the following methods:
1. Check the computer's startup sequence and make sure the hard disk is before the optical drive and USB flash drive.
2. Try to enter safe mode and see if you can enter the system.
3. If none of the above methods work, you can try reinstalling the system.
If the computer cannot be started and cannot enter the system, it means there is a problem with the operating system. There is a glitch in this system.
Then my suggestion is to reinstall your home operating system.
At that time, you must pay attention to your C drive and try to keep the space around level 200~300.
If there is insufficient space on the C drive in the future, your system will not be able to run normally.
1. First of all, how many hard drives does your computer have? Have you put the hard drive where the system is installed as the first startup item? You can set it in bios.
2. Should the original system that comes with the computer be win10 or win8? If so, then it should be that the bios is not set to be installable for other systems. Find out where this option is. Check to see if it can start normally after setting it up. If not, then reinstall it after setting it up.
3. Your previous partition was traditional, was it partition? Have you installed the system in gpt format? If so, you can use the PE disk to repair the boot. Try to enter the system, if it still doesn't work, reset the bios.
When the computer cannot be turned on and cannot enter the system, we need to pay attention to the following points when repairing it. First, let’s see how familiar we are with the computer. If we are not familiar with it, we must hire a professional when repairing the computer. The master performs the repairs, so the quality of the repairs is more reliable.
When plugging or unplugging circuits, everyone should also be careful not to damage the circuit.
The above is the detailed content of The computer cannot enter the system, please help?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
