電腦核顯切換獨顯教學！面對電腦核顯與獨顯如何切換的難題，php小編西瓜為大家帶來詳細的解決方法，讓您輕鬆暢享高效能遊戲體驗。以下內容將一步步引導您切換操作，解決電腦核顯無法發揮最大效能的困擾。
核顯切換獨顯的方法:
1、先開始選單中，選擇控制面板。
2、進入控制台如果誰分類介面，可以選擇更改小圖示顯示。
3、小圖示顯示清單中找到NVIDIA控制台。
4、選擇管理3D設定。
5、然後我們可以進行顯示卡的選擇。
6.我們選擇高效能處理器即可切換獨顯
步驟/方式1
以win 10為例，首先，點選win10桌面工作列右下角的一個小倒三角標誌。在獨立顯示卡標識上按滑鼠右鍵－顯示卡屬性。如下兩圖。
步驟/方式2
然後在獨立顯示卡控制面板，點選——。
步驟/方式3
點選。
步驟/方式4
然後找到遊戲所在位置，也就是安裝目錄，找到運行遊戲的.exe文件，選中，單擊。如圖，選取了COD6(註：使命召喚6)的運作程序。
步驟/方式5
然後顯示新增成功！點選完成設定。這樣在運行該大型遊戲時候系統會自動切換到獨顯運行，保證遊戲fps流暢性
切換集顯獨顯方法為
1、右鍵點擊桌面空白處，選擇開啟NVIDIA控制面板;2、點擊“管理3D設定”，然後切換到“程式設定”選項卡;3、在第一條選擇自訂程式中點選「新增」按鈕，在下拉方塊中選擇要使用獨立顯示卡的應用程式;4、在第二條的圖形處理器中選擇「高效能NVIDIA處理器”，然後點擊右下方應用即可。不選擇獨顯就是集顯運行了
切換顯示卡的特定操作步驟：
1、先滑鼠右鍵點選此電腦，選擇屬性，
2、在屬性介面點選裝置管理員，
2、在屬性介面點選裝置管理員，
3、在設備管理器找到顯示適配器選項，
4、打開顯示適配器選項，可以看到兩個選卡列表，第一個是集成顯卡，第二個是獨立顯卡，
5、首先右鍵單擊集成顯示卡，選擇禁用設備，
6、系統提示設備將停止運行，點擊是按鈕，集成顯卡被禁用了，屏幕會瞬間閃爍一下，一般此時會自動啟用獨立顯示卡，不行的話手動啟動，
五、電腦獨顯壞了怎樣切換到集顯？
順著連接顯示器的VGA/DP/HDMI線找到顯示卡，把顯示卡那一端拔出插入機箱上面豎起的顯示卡介面就好了。
方法一：控制面板
首先，您可以透過電腦的控制面板來檢視並設定顯示卡選項。 在電腦桌面上，右鍵點選空白區域，選擇「顯示設定」。 在顯示設定視窗中，點選「進階顯示設定」。 在新視窗中，點選「顯示適配器屬性」。 這時會彈出一個新窗口，選擇“驅動器”選項卡。 點選「屬性」按鈕，在屬性視窗中尋找「顯示卡資訊」或類似選項。 在顯示卡資訊中，您可以查看目前使用的顯示卡以及切換到獨顯的選項。 如果有切換選項，請選擇獨顯，儲存設定並重新啟動電腦。 方法二：BIOS設定 除了透過控制面板，您也可以嘗試透過BIOS設定來開啟獨顯。 Restart the computer and press the corresponding key (usually Delete, F2, or F10) during startup to enter the BIOS setup. In the BIOS settings, use your keyboard to navigate to the Advanced or Graphics options. In the graphics settings, look for options related to "Video Mode" or "GPU Mode". If there is a switching option, select discrete graphics mode, save the settings and restart the computer.Many graphics card manufacturers also provide their own control panel software, such as NVIDIA's NVIDIA control panel or AMD's Radeon setup software. You can try to enable independent graphics through these software.
First, you need to install the corresponding graphics card control panel software on your computer. You can download and install the latest version of the software from the graphics card manufacturer's official website.
After the installation is complete, open the control panel software and look for options related to graphics card settings. Usually, you can find relevant options under the "Settings", "Preferences" or "Graphics Card Information" tabs in the software interface.
If you find the option to enable discrete graphics, set it to "Enable" or similar and save the settings.
Please note that different graphics card control panel software interfaces and options may be different, and the specific steps may be different.
If none of the above methods can successfully turn on the independent graphics, you can try to solve the problem through Device Manager.
On the computer desktop, right-click the Start menu and select "Device Manager". In the Device Manager window, find the "Display Adapters" option and expand it. You should see two or more display adapter names, one for integrated graphics and one for discrete graphics. Right-click on the integrated graphics card and select "Disable Device". Right-click on the discrete graphics card and select "Enable Device". Save settings and restart your computer.Turn on your computer's independent graphics card to improve graphics processing performance, giving you a better experience in games, graphic design, or other applications that require graphics calculations. In this article, we introduce the different methods and steps to enable independent graphics through the control panel, BIOS settings, graphics card control panel software, and device manager.
Remember to make sure you have backed up your important data before making any changes, and proceed with caution. If you encounter difficulties or problems during operation, please seek professional help.
I hope that through the methods provided in this article, you can successfully turn on your computer's independent graphics card and get better graphics performance and experience.
The method to switch to independent graphics mode is as follows
1 Switching to independent graphics mode requires following certain steps and operations, but not all computers support switching to independent graphics mode.
2 The specific operation method varies depending on the computer brand and model. Generally, you need to enter the BIOS settings, find the graphics card option, and switch the integrated graphics card to a discrete graphics card.
3 When using the independent graphics card mode, you need to pay attention to the heat dissipation of the computer, because the power consumption of the independent graphics card is large, which can easily cause the computer to overheat, affecting the performance and life of the computer.
Extension: If you are not sure whether your computer supports switching to independent graphics card mode, you can check the computer manual or consult the customer service of the computer brand.
At the same time, when using independent graphics card mode, it is recommended to choose an energy-efficient graphics card driver to save power and improve computer performance.
Regarding this issue, if your computer has two graphics cards (one integrated graphics card and one discrete graphics card), you can follow the steps below to switch to the discrete graphics card:
1. Open Control Panel and select "Hardware and Sound".
2. Click "Device Manager".
3. Find the "Display Adapter" option in the Device Manager.
4. Click "Display Adapter", then right-click and select "Properties".
5. In the properties window, click the Driver tab.
6. Click "Update Driver".
7. Select "Choose from a list of drivers on your computer."
8. Select the driver for your discrete graphics card and install it.
9. After the installation is complete, restart your computer.
10. After restarting, the computer will use the discrete graphics card by default.
The switching steps are different depending on the model of independent graphics. Here we take switching AMD discrete graphics + integrated graphics as an example to introduce the specific steps of switching:
1. Leave the desktop blank Right-click the area and select Configure Swapable Graphics Card.
2. Click to enter the ATI graphics card control center, and you can select the specified program to set the power saving mode or high performance mode.
3. Taking CS online as an example, we will introduce the steps to add and select the CS program.
4. The added mode is high-performance mode.
5. After saving, set the default graphics card of the program to independent graphics.
How to switch between integrated graphics and independent graphics:
1. First, select Control Panel in the Start menu.
2. Enter the control panel and choose to change the display of small icons in the category interface.
3. Find the NVIDIA control panel in the small icon display list.
4. Select Manage 3D settings.
5. Then we can choose the graphics card.
6. We can switch to independent graphics by selecting a high-performance processor.
以上是電腦核顯怎麼切換獨顯？的詳細內容。更多資訊請關注PHP中文網其他相關文章！
