Article Introduction：1. As shown in the figure, we want the fonts in the document to be displayed from horizontal to vertical directions. 2. First, we select all the text content that needs to change the text direction. 3. Click [Page Layout] in the toolbar. 4. Select [Text Direction] in the [Page Layout] menu. 5. In the [Text Direction] drop-down menu, the [Horizontal Direction] display is currently selected. 6. To change it to vertical direction, we select [Vertical direction from right to left] or [Vertical direction from left to right] in the [Text direction] drop-down menu. They are both vertical direction settings, but the starting direction is different. 7. As shown in the figure, select [Vertical direction from right to left], and you can see that the text content starts to display from the right. 8. If you select [Vertical direction from left to right], the text content will start vertically from the left.

2024-03-27 comment 0  1240

Article Introduction：WPS Office is a very easy-to-use document office software. When using this software to edit documents, many friends will need to display multiple windows in the same window. This will make your documents cleaner and more concise. Then Many friends still don’t know how to operate it. Next, the editor will teach you the specific operation method. Method introduction: Click View, open wps, and select the view option at the top of the interface. Click Window Rearrangement and select the window rearrangement option in the interface. To select horizontal/vertical tiles, click Horizontal or Vertical Tile in the extension list.

2024-06-28 comment 0  662

Article Introduction：How to set the horizontal and vertical centering of Excel table document printing? The method is very simple. Users can directly click Print under the file option, and then select Page Setup to perform the operation. Let this site carefully introduce to users how to set the horizontal and vertical centering settings for Excel table document printing. How to set the horizontal and vertical centering for Excel table document printing 1. In the first step, we select a table document, then right-click and click the Open With option, and then click to select the Excel option. 2. In the second step, after opening the table document, we first click the open file option in the upper left corner of the page on the table document editing page. 3. The third step, after entering the file options page of Excel, we will

2024-08-20 comment 0  1209

Article Introduction：Center an image in Dreamweaver: Select the image you want to center. In the Properties panel, set Horizontal Alignment to Center. (Optional) Set Vertical Alignment to Center or Bottom.

2024-04-08 comment 0  1417

Article Introduction：The method of calling up the scrolling text box is as shown in the figure. Microsoft has disabled it by default. Switch to the [Development Tools] tab and select the second one in the [Control Group] - Text Box. Draw a text box on the slide. Right mouse button - property sheet, change ScrollBars to 2-fmScrollBarsVertical, which is the third vertical scroll bar. Tip: Each item in the ScrollBars scroll bar needs to be explained. 0-fmScrollBarsNone no scroll bar 1-fmScrollBarsHorizontal horizontal scroll bar 2-fmScrollBarsVertical vertical scroll bar 3-fmScrollBarsboth horizontal and vertical

2024-04-17 comment 0  1074

Article Introduction：Step 1: Use the [Line Segment Ruler Tool] and press the Shift key to construct a horizontal line segment AB; construct a point F above the line segment AB. Step 2: Construct a point D on line segment AB, select point D and line segment AB as the perpendicular line to AB. Step 3: Connect FD, select the line segment FD, and use [Ctrl+M] to construct the midpoint E. Step 4: Select point E and line segment DF, select [Construction] - [Perpendicular Line] to draw the perpendicular line of line segment FD. The intersection point of the two vertical lines is P. Step 5: Select point D and point P, and select [Construction] - [Trajectory].

2024-06-05 comment 0  787

Article Introduction：1. Step 1: Select all pictures and find Alignment in the menu bar above. 2. In step 2, select vertical center so that the images are all on a horizontal line. 3. Step 3. In the alignment mode, just select horizontal distribution. Have you learned it?

2024-06-01 comment 0  502

Article Introduction：Open the geometric sketchpad, click the [Ruler] tool on the toolbox, hold down the [shift] key, draw a horizontal line segment in the operating area, select the [Text] tool on the toolbox, when the cursor moves from a [ When the "little white hand" changes into a "little black hand", click on the two endpoints of the line segment to display A and B, and get the line segment AB. Click the [Select Arrow] tool on the toolbox, select an endpoint of the middle line segment and the line segment, click the [Construct] - [Perpendicular Line] command in sequence to draw the perpendicular line of line segment AB. Click the [Point] tool on the toolbox, move the cursor to the vertical line, when the vertical line is highlighted, click the left mouse button to get a point, select the [Select Arrow] tool on the toolbox, and select the Points A and B, click [Construct] -

2024-06-03 comment 0  772

Article Introduction：1. Draw a perfect circle, set the stroke to 16. 2. Click the stroke option, change the endpoint to rounded corners, check the dotted line, and set the interval to 18. Profile, select the triangle. 3. Next, select Effect-Distort and Transform-Transform. Check Preview and adjust the copy value to 35. 4. Set both the horizontal and vertical values ​​to 90%. The angle is 80, and the effect comes out.

2024-04-07 comment 0  523

Article Introduction：1. Open the CorelDRAW software and click the ruler above to open the auxiliary line. 2. Select the type of auxiliary line in the setting window on the right. 3. Select the vertical line and enter the X coordinate to set it. 4. Use the same method to enter the horizontal auxiliary line. Y coordinate; just enter the angle parameter for the angle auxiliary line

2024-04-22 comment 0  583

Article Introduction：Open the geometric sketchpad, select [Line Tool], and draw a horizontal straight line L in the blank area of ​​the sketchpad to represent the ground. Select [Custom Tools] from the toolbox on the left, hold down the mouse, and select [In the pop-up tool menu] Physics Tools] - [Wall], click the mouse anywhere above the line l to draw an endpoint of the wall. At this time, hold down the Shift key and drag the mouse downward until the wall intersects with the line l, and then click With the mouse, you can draw a wall perpendicular to the ground.

2024-06-11 comment 0  415

Article Introduction：1. Draw a horizontal straight line, select the initial point and press [Ctrl+H] to hide it. Use the point tool to construct points O, E, and F on the straight line. Select point O and point E, select [Construction] - [Draw a circle with the center and points on the circumference] to create a circle OE with O as the center, and use the two methods to create a concentric circle OF. 2. Use the point tool to pick point G on the large circle, and use the line segment tool to connect OG to the small circle at point H. Select point H and the straight line, select [Construction] - [Parallel Line] to make a parallel line of straight line EF passing through point H. In the same way, draw a perpendicular line of the straight line passing through point G. The two lines intersect at point M. 3. Select point G and point M, select [Construction] - [Trajectory], and an ellipse will appear. 4. Use the point tool to pick any point A on the ellipse (the key point F cannot be picked), select point A and the straight line

2024-06-11 comment 0  1035

Article Introduction：Extensibility is key when choosing a framework for your PHP project. Consider the following: Horizontal scalability: Expand by adding servers or distributed architecture. Vertical scalability: Handle more requests and data loads without rewriting. Caching and Queuing: Improving performance and scalability. Lightweight and efficient: better resource utilization and scalability. Maintainability and Modularity: Easily add and extend functionality.

2024-05-31 comment 0  814

Article Introduction：We often use WPS for office and study, such as data, icons, etc., but there are still many novice users who don’t know how to insert coordinate axes in WPS. Today I want to teach you a tutorial on making number axes in WPS. Those who are interested Users don’t miss it. How to create a number line in wps? 1. Open WPS, then click Insert Shape and select Line. 2. Hold down the shift key to draw a vertical line. 3. After drawing a vertical line, hold down the Ctrl key to copy the straight line. After copying multiple straight lines, select all the straight lines. 4. Select all the straight lines, click Horizontal Arrange, and the vertical lines will be evenly distributed. 5. Then click to insert the arrow line. 6. Hold down the shift key to draw a horizontal arrow line. 7. Draw it well

2024-08-26 comment 0  1134

Article Introduction：The normal computer resolution is 1080p, which is one of the most common resolutions currently and is widely used in most laptops and desktop computers. 1080p resolution can provide good image quality and display effects in most cases, and is suitable for office, Entertainment and general daily use. Resolution refers to the number of pixels that can be displayed on the display device, usually expressed as the number of horizontal pixels and vertical pixels. For example, 1920x1080 means 1920 horizontal pixels and 1080 vertical pixels. The choice of resolution has both user experience and image quality. Significant influence.

2023-09-12 comment 0  5189

Article Introduction：1. First open the file, as shown in the figure: 2. Then click [Select Tool] on the toolbar to select the graphic, as shown in the figure: 3. Then in the toolbox, there is a small triangle on the lower right of [Select Tool], and the pop-up option selects [Free Transform Tool] , as shown in Figure: 4. Click the Free Tilt button on the property bar, as shown in Figure: 5. Finally, type a value in the tilt angle box on the property bar (to specify the degree to tilt the object horizontally or vertically), as shown in Figure :

2024-04-07 comment 0  714

Article Introduction：The m4 firearm is one of the most popular firearms in Firefly Assault. Many people will use and modify this gun. When it comes to modifications, it is best for everyone to upgrade this gun to the full level. This is because Firefly The strength of the full-level Assault M4 is much higher than that of the non-maximum level, so it needs to be changed to the full level. So how to reach the full level? Many people don’t know this modification method, so in order to let everyone know how to modify it to reach the maximum level, today I will bring you an M4 maximum level guide, let’s take a look. If you want to modify a fully modified M4 in the game, there are many things that need to be modified. The first is the barrel. When choosing the barrel, you need to carefully choose the edgeqb silencer. This silencer can reduce the level of the gun. Seat, vertical rear seat and effective range, after modification, the lower part is larger

2024-07-15 comment 0  653

Article Introduction：Find the small window on the right side of the window. Open the custom animation window next to it. Add animation effects to objects in the text, such as emphasizing entry. Open the effect options as shown in the picture. In the direction of your shoulders, choose horizontal or vertical. Finally, delete this effect.

2024-06-05 comment 0  788

Article Introduction：Create a new blank document with widescreen 16::9, select Insert, Shape, Rectangle, then draw a rectangle, select Edit Vertices, adjust control points, select WordArt, set the font color to white, set the outline to white, and draw a rectangle again , edit vertices, press the CRL key to add vertices, select adjustment control points, and modify the graphics to the pattern as shown in the figure. Press the CRL key to copy an image, select vertical flip, select horizontal flip again, adjust it into the pattern as shown in the picture, select a straight line, adjust the shape, copy a line again, fill it with blue, and enter appropriate text in the middle.

2024-04-17 comment 0  1221

Article Introduction：Insert - Shape - select the straight line, hold down the shift key, insert a horizontal straight line. After drawing the straight line, go to Insert - Shape - select the ellipse, hold down the Shift key, insert a circle, hold down the shift + Ctrl key, Drag the small ball horizontally multiple times. In order to improve efficiency, you can drag 1 circle into 2 circles and 2 circles into 4 circles. Select all the ellipses, go to Format - Align - Align horizontally. Be careful not to select a straight line here. In Insert - Shape - select the ellipse and a right triangle. Place the right triangle at the bottom of the ellipse and adjust the right triangle. position, so that the entire shape becomes a comma. After adjustment, select the ellipse and right triangle at the same time, right-click the mouse and select [Combine] CTRL

2024-04-17 comment 0  681