Bagaimana untuk mencapai ketersediaan tinggi keepalived+nginx-Nginx-php.cn

1.Pengenalan Keeplived

keepalived pada asalnya direka untuk perisian pengimbangan beban lvs untuk mengurus dan memantau status setiap nod perkhidmatan dalam sistem kluster lvs Ia kemudiannya ditambah Implement fungsi vrrp yang sangat tersedia. Selain mengurus perisian LVS, keepalived juga boleh menyokong penyelesaian ketersediaan tinggi untuk perkhidmatan lain.

keepalived melaksanakan fungsi ketersediaan tinggi melalui protokol vrrp. vrrp (protokol redundansi penghala maya) protokol redundansi penghala maya. Tujuan vrrp adalah untuk menyelesaikan satu titik masalah kegagalan penghalaan statik Ia boleh memastikan bahawa apabila nod individu turun, keseluruhan rangkaian boleh berjalan tanpa gangguan.

2. Prinsip failover ketersediaan tinggi Keepalived

Kegagalan antara perkhidmatan ketersediaan tinggi keepalived dilaksanakan melalui vrrp. Apabila perkhidmatan keepalived berfungsi, nod induk akan menghantar mesej degupan jantung (berbilang hantar) secara berterusan ke nod sandaran untuk memberitahu nod sandaran bahawa ia masih hidup.

Apabila nod induk gagal, mesej degupan jantung tidak boleh dihantar ke nod sandaran jika nod sandaran tidak dapat terus mengesan degupan jantung daripada nod induk. Ia akan memanggil program pengambilalihan sendiri untuk mengambil alih sumber IP dan perkhidmatan nod induk. Apabila nod utama pulih, nod siap sedia akan mengeluarkan sumber IP dan perkhidmatan yang diambil alih apabila nod utama gagal, dan kembali kepada peranan siap sedia asalnya

3 Pasang nginx

3.1. Nod induk (192.168.80.22)

3.1.1 Pasang alatan kompilasi dan fail perpustakaan

yum -y install make zlib zlib-devel gcc-c++ libtool openssl openssl-devel

Salin selepas log masuk

3.1.2 >

#进入目录
cd /usr/local/develop/anginx

#上传安装文件并解压
tar -zxvf pcre-8.38.tar.gz

#进入安装目录
cd pcre-8.38

#检查配置
./configure

#编译、安装
make && make install

#查看pcre版本
pcre-config --version

Salin selepas log masuk

3.1.3. Pasang nginx

#进入目录
cd /usr/local/develop/anginx

#上传安装文件，并解压
tar -zxvf nginx-1.8.1.tar.gz

#进入安装目录
cd nginx-1.8.1

#检查配置
./configure --prefix=/usr/local/develop/anginx/webserver/nginx --with-http_stub_status_module --with-http_ssl_module --with-pcre=/usr/local/develop/anginx/pcre-8.38

#编译安装
make && make install

#查看nginx版本
 /usr/local/develop/anginx/webserver/nginx/sbin/nginx -v
--------------------------------------------------------
[root@hadoop02 webserver]# /usr/local/develop/anginx/webserver/nginx/sbin/nginx -v
nginx version: nginx/1.8.1

#配置nginx（检查）
/usr/local/develop/anginx/webserver/nginx/sbin/nginx -t

#nginx管理命令
/usr/local/develop/anginx/webserver/nginx/sbin/nginx       # 启动 nginx
/usr/local/develop/anginx/webserver/nginx/sbin/nginx -s stop       # 停止 nginx
/usr/local/develop/anginx/webserver/nginx/sbin/nginx -s reload      # 重新载入配置文件
/usr/local/develop/anginx/webserver/nginx/sbin/nginx -s reopen      # 重启 nginx

Salin selepas log masuk

3.1.4.nginx konfigurasi asas

vi nginx.conf

#user nobody;
worker_processes 1;

#error_log logs/error.log;
#error_log logs/error.log notice;
#error_log logs/error.log info;

pid    logs/nginx.pid;


events {
  worker_connections 1024;
}


http {
  include    mime.types;
  default_type application/octet-stream;

  log_format main &#39;$remote_addr - $remote_user [$time_local] "$request" &#39;
           &#39;$status $body_bytes_sent "$http_referer" &#39;
           &#39;"$http_user_agent" "$http_x_forwarded_for"&#39;;

  access_log logs/access.log main;

  sendfile    on;
  #tcp_nopush   on;

  #keepalive_timeout 0;
  keepalive_timeout 65;

  #gzip on;
  
  #添加tomcat列表，真实应用服务器都放在这
  upstream tomcat_pool{
    #server tomcat地址:端口号 weight表示权值，权值越大，被分配的几率越大;
    server 192.168.80.22:8080 weight=4 max_fails=2 fail_timeout=30s;
    server 192.168.80.22:8081 weight=4 max_fails=2 fail_timeout=30s;
    
  }

  server {
    listen    80;
    server_name tomcat_pool;

    #charset koi8-r;

    #access_log logs/host.access.log main;

    location / {
      #root  html;
      #index index.html index.htm;
      proxy_pass http://tomcat_pool;  #转向tomcat处理
      proxy_set_header  host       $host;
      proxy_set_header  x-real-ip    $remote_addr;
      proxy_set_header  x-forwarded-for $proxy_add_x_forwarded_for;
    }

    #error_page 404       /404.html;

    # redirect server error pages to the static page /50x.html
    #
    error_page  500 502 503 504 /50x.html;
    location = /50x.html {
      root  html;
    }


}

Salin selepas log masuk

3.2. Arahan : Kaedah pemasangan adalah sama seperti nod induk nginx.

4. Pasang keepalived

4.1. Nod induk (192.168.80.22)

rreeeMengenai arahan konfigurasi:

[router_id] ialah pengecam penghalaan, yang sepatutnya unik dalam LAN

[state] mentakrifkan peranan vrrp
[antara muka] mentakrifkan antara muka yang digunakan Kad rangkaian yang digunakan oleh pelayan saya di sini semuanya eth1
[virtual_router_id] ialah pengecam id laluan maya, yang terdapat dalam. satu set konfigurasi yang disimpan Tetapan aktif dan siap sedia adalah konsisten
[keutamaan] ialah keutamaan, lebih besar nombor, lebih besar keutamaan,
[auth_type] ialah kaedah Pengesahan
[auth_pass] ialah kata laluan pengesahan

#安装keepalived
yum install keepalived -y

#启动keepalived服务
/etc/init.d/keepalived start
-------------------------------------------
[root@hadoop02 anginx]# /etc/init.d/keepalived start
正在启动 keepalived：                   [确定]
[root@hadoop02 anginx]# ps -ef |grep keepalived
root   15723   1 0 00:59 ?    00:00:00 /usr/sbin/keepalived -d
root   15724 15723 0 00:59 ?    00:00:00 /usr/sbin/keepalived -d
root   15725 15723 0 00:59 ?    00:00:00 /usr/sbin/keepalived -d
root   15731 15622 0 00:59 pts/1  00:00:00 grep keepalived
[root@hadoop02 anginx]#

#设置开机自启动
echo "/etc/init.d/keepalived start" >>/etc/rc.local

#关闭keepalived服务
/etc/init.d/keepalived stop

#编辑keepalived配置文件
vi /etc/keepalived/keepalived.conf

-----------------------------------------------------------
! configuration file for keepalived

global_defs {
  notification_email {
   acassen@firewall.loc
   failover@firewall.loc
   sysadmin@firewall.loc
  }
  notification_email_from alexandre.cassen@firewall.loc
  smtp_server 192.168.200.1
  smtp_connect_timeout 30
  router_id lb01
}

vrrp_instance vi_1 {
  state master
  interface eth1
  virtual_router_id 55
  priority 150
  advert_int 1
  authentication {
    auth_type pass
    auth_pass server123
  }
  virtual_ipaddress {
    192.168.80.100 dev eth1 label eth1:1
  }
}
...........................................................

Salin selepas log masuk

5.1

#安装keepalived
yum install keepalived -y

#启动keepalived服务
/etc/init.d/keepalived start
-------------------------------------------
[root@hadoop02 anginx]# /etc/init.d/keepalived start
正在启动 keepalived：                   [确定]
[root@hadoop02 anginx]# ps -ef |grep keepalived
root   15723   1 0 00:59 ?    00:00:00 /usr/sbin/keepalived -d
root   15724 15723 0 00:59 ?    00:00:00 /usr/sbin/keepalived -d
root   15725 15723 0 00:59 ?    00:00:00 /usr/sbin/keepalived -d
root   15731 15622 0 00:59 pts/1  00:00:00 grep keepalived
[root@hadoop02 anginx]#

#设置开机自启动
echo "/etc/init.d/keepalived start" >>/etc/rc.local

#关闭keepalived服务
/etc/init.d/keepalived stop

#编辑keepalived配置文件
vi /etc/keepalived/keepalived.conf

-----------------------------------------------------------------
! configuration file for keepalived

global_defs {
  notification_email {
   acassen@firewall.loc
   failover@firewall.loc
   sysadmin@firewall.loc
  }
  notification_email_from alexandre.cassen@firewall.loc
  smtp_server 192.168.200.1
  smtp_connect_timeout 30
  router_id lb02
}

vrrp_instance vi_1 {
  state backup
  interface eth1
  virtual_router_id 55
  priority 100
  advert_int 1
  authentication {
    auth_type pass
    auth_pass server123
  }
  virtual_ipaddress {
    192.168.80.100 dev eth1 label eth1:1
  }
}
.............................................................

Salin selepas log masuk

5.2 Akses perkhidmatan melalui IP maya

http://192.168.80.100/session-redis-demo/

5.3. Hentikan perkhidmatan Node keepalived hos

#在节点一执行（192.168.80.22）
/etc/init.d/keepalived start
-------------------------------------
[root@hadoop02 anginx]# ps -ef |grep keepalived
root   15788   1 0 01:09 ?    00:00:00 /usr/sbin/keepalived -d
root   15790 15788 0 01:09 ?    00:00:00 /usr/sbin/keepalived -d
root   15791 15788 0 01:09 ?    00:00:00 /usr/sbin/keepalived -d
root   15807 15622 0 01:33 pts/1  00:00:00 grep keepalived
[root@hadoop02 anginx]#


#在节点二执行（192.168.80.21）
/etc/init.d/keepalived start
---------------------------------------
[root@hadoop01 ~]# ps -ef |grep keepalived
root   11542   1 0 01:30 ?    00:00:00 /usr/sbin/keepalived -d
root   11544 11542 0 01:30 ?    00:00:00 /usr/sbin/keepalived -d
root   11545 11542 0 01:30 ?    00:00:00 /usr/sbin/keepalived -d
root   11550 11512 0 01:33 pts/1  00:00:00 grep keepalived
[root@hadoop01 ~]#

Salin selepas log masuk

5.4 Teruskan mengakses perkhidmatan melalui ip maya

Bagaimana untuk mencapai ketersediaan tinggi keepalived+nginx

http://. 192.168.80.100/session-redis-demo/

6.keepalived+nginx integration

Arahan: Tulis skrip nginx daemon . Jika perkhidmatan nginx gagal, hentikan perkhidmatan kekal nod semasa. Beralih ke nod sandaran secara automatik. Bagaimana untuk mencapai ketersediaan tinggi keepalived+nginx

6.1. Tulis skrip daemon nginx

#在节点一执行（192.168.80.22）
/etc/init.d/keepalived stop

#观察备节点变化
ip addr
-------------------------------------------
[root@hadoop01 ~]# ip addr
1: lo: <loopback,up,lower_up> mtu 65536 qdisc noqueue state unknown 
  link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
  inet 127.0.0.1/8 scope host lo
  inet6 ::1/128 scope host 
    valid_lft forever preferred_lft forever
2: eth1: <broadcast,multicast,up,lower_up> mtu 1500 qdisc pfifo_fast state up qlen 1000
  link/ether 00:50:56:38:e5:46 brd ff:ff:ff:ff:ff:ff
  inet 192.168.80.21/24 brd 192.168.80.255 scope global eth1
  inet 192.168.80.100/32 scope global eth1:1
  inet6 fe80::250:56ff:fe38:e546/64 scope link 
    valid_lft forever preferred_lft forever
[root@hadoop01 ~]#

Salin selepas log masuk

6.2. Hentikan perkhidmatan nginx nod induk

rreee

Atas ialah kandungan terperinci Bagaimana untuk mencapai ketersediaan tinggi keepalived+nginx. Untuk maklumat lanjut, sila ikut artikel berkaitan lain di laman web China PHP!