我们一直致力于提升PHP7的性能, 上个月我们注意到GCC的PGO能在Wordpress上能带来近10%的性能提升, 这个让我们很激动.
然而, PGO正如名字所说(Profile Guided Optimization 有兴趣的可以Google), 他需要用一些用例来获得反馈, 也就是说这个优化是需要和一个特定的场景绑定的.
你对一个场景的优化, 也许在另外一个场景就事与愿违了. 它不是一个通用的优化. 所以我们不能简单的就包含这些优化, 也无法直接发布PGO编译后的PHP7.
当然, 我们正在尝试从PGO找出一些共性的优化, 然后手工Apply到PHP7上去, 但这个很明显不能做到针对一个场景的特别优化所能达到的效果, 所以我决定写这篇文章简单介绍下怎么使用PGO来编译PHP7, 让你编译的PHP7能特别的让你自己的独立的应用变得更快.
首先, 要决定的就是拿什么场景去Feedback GCC, 我们一般都会选择: 在你要优化的场景中: 访问量最大的, 耗时最多的, 资源消耗最重的一个页面.
拿Wordpress为例, 我们选择Wordpress的首页(因为首页往往是访问量最大的).
我们以我的机器为例:
<ol> <li><span><span>Intel(R) Xeon(R) CPU X5687 @ 3.60GHz X 16(超线程), </span></span></li> <li><span> </span></li> <li><span>48G Memory </span></li> </ol>
php-fpm 采用固定32个worker, opcache采用默认的配置(一定要记得加载opcache)
以wordpress 4.1为优化场景..
首先我们来测试下目前WP在PHP7的性能(ab -n 10000 -c 100):
<ol> <li><span><span>$ ab -n 10000 -c 100 http:</span><span>//inf-dev-maybach.weibo.com:8000/wordpress/</span><span> </span></span></li> <li><span> </span></li> <li> <span>This is ApacheBench, Version 2.3 $Revision</span><span>: 655654 $> </span> </li> <li><span> </span></li> <li><span>Copyright 1996 Adam Twiss, Zeus Technology Ltd, http:<span>//www.zeustech.net/</span><span> </span></span></li> <li><span> </span></li> <li><span>Licensed to The Apache Software Foundation, http:<span>//www.apache.org/</span><span> </span></span></li> <li><span> </span></li> <li><span>Benchmarking inf-dev-maybach.weibo.com (be patient) </span></li> <li><span> </span></li> <li><span>Completed 1000 requests </span></li> <li><span> </span></li> <li><span>Completed 2000 requests </span></li> <li><span> </span></li> <li><span>Completed 3000 requests </span></li> <li><span> </span></li> <li><span>Completed 4000 requests </span></li> <li><span> </span></li> <li><span>Completed 5000 requests </span></li> <li><span> </span></li> <li><span>Completed 6000 requests </span></li> <li><span> </span></li> <li><span>Completed 7000 requests </span></li> <li><span> </span></li> <li><span>Completed 8000 requests </span></li> <li><span> </span></li> <li><span>Completed 9000 requests </span></li> <li><span> </span></li> <li><span>Completed 10000 requests </span></li> <li><span> </span></li> <li><span>Finished 10000 requests </span></li> <li><span> </span></li> <li><span>Server Software: nginx/1.7.12 </span></li> <li><span> </span></li> <li><span>Server Hostname: inf-dev-maybach.weibo.com </span></li> <li><span> </span></li> <li><span>Server Port: 8000 </span></li> <li><span> </span></li> <li><span>Document Path: /wordpress/ </span></li> <li><span> </span></li> <li><span>Document Length: 9048 bytes </span></li> <li><span> </span></li> <li><span>Concurrency Level: 100 </span></li> <li><span> </span></li> <li><span>Time taken <span>for</span><span> tests: 8.957 seconds </span></span></li> <li><span> </span></li> <li><span>Complete requests: 10000 </span></li> <li><span> </span></li> <li><span>Failed requests: 0 </span></li> <li><span> </span></li> <li><span>Write errors: 0 </span></li> <li><span> </span></li> <li><span>Total transferred: 92860000 bytes </span></li> <li><span> </span></li> <li><span>HTML transferred: 90480000 bytes </span></li> <li><span> </span></li> <li><span>Requests per second: 1116.48 [#/sec] (mean) </span></li> <li><span> </span></li> <li><span>Time per request: 89.567 [ms] (mean) </span></li> <li><span> </span></li> <li><span>Time per request: 0.896 [ms] (mean, across all concurrent requests) </span></li> <li><span> </span></li> <li><span>Transfer rate: 10124.65 [Kbytes/sec] received </span></li> </ol>
可见Wordpress 4.1 目前在这个机器上, 首页的QPS可以到1116.48. 也就是每秒钟可以处理这么多个对首页的请求,
现在, 让我们开始教GCC, 让他编译出跑Wordpress4.1更快的PHP7来, 首先要求GCC 4.0以上的版本, 不过我建议大家使用GCC-4.8以上的版本(现在都GCC-5.1了).
第一步, 自然是下载PHP7的源代码了, 然后做./configure. 这些都没什么区别
接下来就是有区别的地方了, 我们要首先第一遍编译PHP7, 让它生成会产生profile数据的可执行文件:
<ol><li><span><span>$ make prof-gen <br></span></span></li></ol>
注意, 我们用到了prof-gen参数(这个是PHP7的Makefile特有的, 不要尝试在其他项目上也这么搞哈 :) )
然后, 让我们开始训练GCC:
<ol><li><span><span>$ sapi/cgi/php-cgi -T </span><span>100</span><span> /home/huixinchen/local/www/htdocs/wordpress/index.php >/dev/</span><span>null</span><span> </span></span></li></ol>
也就是让php-cgi跑100遍wordpress的首页, 从而生成一些在这个过程中的profile信息.
然后, 我们开始第二次编译PHP7.
<ol> <li><span><span>$ make prof-clean </span></span></li> <li><span>$ make prof-<span>use</span><span> && make install </span></span></li> </ol>
好的, 就这么简单, PGO编译完成了, 现在我们看看PGO编译以后的PHP7的性能:
<ol> <li><span><span>$ ab -n10000 -c </span><span>100</span><span> http:</span><span>//inf-dev-maybach.weibo.com:8000/wordpress/</span><span> </span></span></li> <li><span> </span></li> <li><span>This is ApacheBench, Version <span>2.3</span><span> <span>655654</span><span> $> </span></span></span></li> <li><span> </span></li> <li><span>Copyright <span>1996</span><span> Adam Twiss, Zeus Technology Ltd, http:</span><span>//www.zeustech.net/</span><span> </span></span></li> <li><span> </span></li> <li><span>Licensed to The Apache Software Foundation, http:<span>//www.apache.org/</span><span> </span></span></li> <li><span> </span></li> <li><span>Benchmarking inf-dev-maybach.weibo.com (be patient) </span></li> <li><span> </span></li> <li><span>Completed <span>1000</span><span> requests </span></span></li> <li><span> </span></li> <li><span>Completed <span>2000</span><span> requests </span></span></li> <li><span> </span></li> <li><span>Completed <span>3000</span><span> requests </span></span></li> <li><span> </span></li> <li><span>Completed <span>4000</span><span> requests </span></span></li> <li><span> </span></li> <li><span>Completed <span>5000</span><span> requests </span></span></li> <li><span> </span></li> <li><span>Completed <span>6000</span><span> requests </span></span></li> <li><span> </span></li> <li><span>Completed <span>7000</span><span> requests </span></span></li> <li><span> </span></li> <li><span>Completed <span>8000</span><span> requests </span></span></li> <li><span> </span></li> <li><span>Completed <span>9000</span><span> requests </span></span></li> <li><span> </span></li> <li><span>Completed <span>10000</span><span> requests </span></span></li> <li><span> </span></li> <li><span>Finished <span>10000</span><span> requests </span></span></li> <li><span> </span></li> <li><span>Server Software: nginx/<span>1.7</span><span>.</span><span>12</span><span> </span></span></li> <li><span> </span></li> <li><span>Server Hostname: inf-dev-maybach.weibo.com </span></li> <li><span> </span></li> <li><span>Server Port: <span>8000</span><span> </span></span></li> <li><span> </span></li> <li><span>Document Path: /wordpress/ </span></li> <li><span> </span></li> <li><span>Document Length: <span>9048</span><span> bytes </span></span></li> <li><span> </span></li> <li><span>Concurrency Level: <span>100</span><span> </span></span></li> <li><span> </span></li> <li><span>Time taken <span>for</span><span> tests: </span><span>8.391</span><span> seconds </span></span></li> <li><span> </span></li> <li><span>Complete requests: <span>10000</span><span> </span></span></li> <li><span> </span></li> <li><span>Failed requests: <span>0</span><span> </span></span></li> <li><span> </span></li> <li><span>Write errors: <span>0</span><span> </span></span></li> <li><span> </span></li> <li><span>Total transferred: <span>92860000</span><span> bytes </span></span></li> <li><span> </span></li> <li><span>HTML transferred: <span>90480000</span><span> bytes </span></span></li> <li><span> </span></li> <li><span>Requests per second: <span>1191.78</span><span> [#/sec] (mean) </span></span></li> <li><span> </span></li> <li><span>Time per request: <span>83.908</span><span> [ms] (mean) </span></span></li> <li><span> </span></li> <li><span>Time per request: <span>0.839</span><span> [ms] (mean, across all concurrent requests) </span></span></li> <li><span> </span></li> <li><span>Transfer rate: <span>10807.45</span><span> [Kbytes/sec] received </span></span></li> </ol>
现在每秒钟可以处理1191.78个QPS了, 提升是~7%. 还不赖哈(咦, 你不是说10%么? 怎么成7%了? 呵呵, 正如我之前说过, 我们尝试分析PGO都做了些什么优化, 然后把一些通用的优化手工Apply到PHP7中. 所以也就是说, 那~3%的比较通用的优化已经包含到了PHP7里面了, 当然这个工作还在继续).
于是就这么简单, 大家可以用自己的产品的经典场景来训练GCC, 简单几步, 获得提升, 何乐而不为呢 :)
thanks
编者注：本文是 PHP 大神 —— 鸟哥 @Laruence 的作品，原文地址：http://www.laruence.com/2015/06/19/3063.html
以上就介绍了让你的 PHP 7 更快 GCC PGO，包括了方面的内容，希望对PHP教程有兴趣的朋友有所帮助。
![[Web front-end] Permulaan pantas Node.js](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
