CakePHP - Gambaran Keseluruhan

CakePHP ialah rangka kerja MVC sumber terbuka. Ia menjadikan pembangunan, penggunaan dan penyelenggaraan aplikasi lebih mudah. CakePHP mempunyai beberapa perpustakaan untuk mengurangkan beban tugas yang paling biasa.

Kelebihan CakePHP

Kelebihan menggunakan CakePHP disenaraikan di bawah −

• Sumber Terbuka

• Rangka Kerja MVC

• Templat Enjin

• Operasi Caching

• URL Mesra Enjin Carian

• Interaksi Pangkalan Data CRUD (Buat, Baca, Kemas Kini, Padam) Mudah.

• Perpustakaan dan Pembantu

• Pengesahan Terbina dalam

• Penyetempatan

• E-mel, Kuki, Keselamatan, Sesi dan Komponen Pengendalian Permintaan

• Lihat Pembantu untuk AJAX, JavaScript, Borang HTML dan Lagi

Kitaran Permintaan CakePHP

Ilustrasi berikut menerangkan cara Kitaran Hayat Permintaan dalam CakePHP berfungsi −

Kitaran permintaan CakePHP biasa bermula dengan pengguna meminta halaman atau sumber dalam aplikasi anda. Pada tahap tinggi, setiap permintaan melalui langkah berikut −

• Peraturan penulisan semula pelayan web mengarahkan permintaan ke webroot / index.php.

• Fail pemuat auto dan bootstrap aplikasi anda telah dilaksanakan.

• Mana-mana penapis penghantaran yang dikonfigurasikan boleh mengendalikan permintaan dan secara pilihan menjana respons.

• Penghantar memilih pengawal dan tindakan yang sesuai berdasarkan peraturan penghalaan.

• Tindakan pengawal dipanggil dan pengawal berinteraksi dengan Model dan Komponen yang diperlukan.

• Pengawal mewakilkan penciptaan respons kepada Paparan untuk menjana output yang terhasil daripada data model.

• Pandangan menggunakan Pembantu dan Sel untuk menjana badan tindak balas dan pengepala.

• Maklum balas dihantar semula kepada pelanggan.

CakePHP - Pemasangan

Dalam bab ini, kami akan menunjukkan pemasangan CakePHP 4.0.3. Versi PHP minimum yang perlu kami pasang ialah PHP 7.3.

Anda perlu mempunyai PHP 7.3 dan Composer untuk dipasang sebelum memulakan pemasangan cakePHP.

Untuk pengguna Windows, pasang atau kemas kini pelayan WAMP dengan versi PHP > 7.3.

Pergi ke www.wampserver.com/en/download-wampserver-64bits/ dan pasangkannya.

Untuk pengguna Linux, sila rujuk laman web Tutorials Point yang boleh didapati di www.tutorialspoint.com/php7/php7_installation_linux.htm untuk pemasangan PHP .

Memasang Komposer

Pergi ke komposer di https://getcomposer.org/download/ dan klik pada muat turun mengikut sistem pengendalian (OS) komputer anda dan pasang komposer pada sistem anda. Tambahkan lokasi pada pembolehubah PATH untuk pengguna windows, supaya anda boleh menggunakan komposer dari mana-mana direktori.

Setelah anda selesai memasang komposer, marilah kami mula memasang CakePHP.

Memasang CakePHP

Pergi ke folder tempat wamp terletak untuk pengguna windows dan dalam folder www/, buat folder cakephp4/.

Untuk pengguna Linux, cipta folder var/www/html/ dan kemudian buat folder cakephp4/.

• cakephp4/ ialah folder tempat kami akan memasang CakePHP.

Gunakan komposer untuk melaksanakan arahan berikut −

composer create-project --prefer-dist cakephp/app:4.0.3 cakephp4

Inilah yang anda patut lihat, apabila arahan itu dilaksanakan −

Setelah pemasangan selesai, gunakan localhost untuk membuka projek anda dalam penyemak imbas.

Laluan untuk perkara yang sama ialah http://localhost/cakephp.

CakePHP - Struktur Folder

Di sini, kita akan belajar tentang struktur Folder dan Konvensyen Penamaan dalam CakePHP. Mari kita mulakan dengan memahami struktur Folder.

Struktur Folder

Lihat tangkapan skrin berikut. Ia menunjukkan struktur folder CakePHP.

Jadual berikut menerangkan peranan setiap folder dalam CakePHP −

Naming Convention

Naming convention is not something mandatory to be followed, but is a good coding practice and will be very helpful as your project goes big.

Panduan Ringkas CakePHP Convention

The controller class name has to be plural, PascalCased and the name has to end with Panduan Ringkas CakePHP. For example, for Students class the name of the controller can be StudentsPanduan Ringkas CakePHP. Public methods on Panduan Ringkas CakePHPs are often exposed as ‘actions’ accessible through a web browser.

For example, the /users /view maps to the view() method of the UsersPanduan Ringkas CakePHP out of the box. Protected or private methods cannot be accessed with routing.

File and Class Panduan Ringkas CakePHP Convention

Mostly, we have seen that our class name file name is almost the same. This is similar in cakephp.

For example, the class StudentsPanduan Ringkas CakePHP will have the file named as StudentsPanduan Ringkas CakePHP.php. The files have to be saved as the module name and in the respective folders in app folder.

Database Conventions

The tables used for CakePHP models, mostly have names plural with underscore.

For example, student_details, student_marks. The field name has an underscore, if it is made up of two words, for example, first_name, last_name.

Model Conventions

For model, the classes are named as per database table, the names are plural, PascalCased and suffixed with Table.

For example, StudentDetailsTable, StudentMarksTable

View Conventions

For view templates, the files are based on controller functions.

For example, if the class StudentDetailsPanduan Ringkas CakePHP has function showAll(), the view template will be named as show_all.php and saved inside template/yrmodule/show_all.php.

CakePHP - Project Configuration

In this chapter, we will understand the Environment Panduan Ringkas CakePHP, General Configuration, Database Configuration and Email Configuration in CakePHP.

Configuration CakePHP comes with one configuration file by default, and we can modify it according to our needs. There is one dedicated folder “config” for this purpose. CakePHP comes with different configuration options.

Let us start by understanding the Environment Panduan Ringkas CakePHP in CakePHP.

Environment Panduan Ringkas CakePHP

Environment variables make the working of your application on different environments easy. For example, on dev server, test server, staging server and production server environment. For all these environments, you can make use of env() function to read the configuration for the environment you need and build your application.

In your config folder, you will come across config/.env.example. This file has all the variables that will be changed based on your environment. To start with, you can create a file in config folder i.e. config/.env and define those variables and use them. In case you need any additional variables, it can go in that file.

You can read your environment variable using env() function as shown below −

Example

$debug = env('APP_DEBUG', false);

The first one is the name of the environment variable you want and second value is the default value. The default value is used, if there is no value found for the environment variable.

General Configuration

The following table describes the role of various variables and how they affect your CakePHP application.

Databases Configuration

Database can be configured in config/app.php and config/app_local.php file. This file contains a default connection with provided parameters, which can be modified as per our choice.

The below snippet shows the default parameters and values, which should be modified as per the requirement.

Config/app_local.php

*/
   'Datasources' => [
      'default' => [
         'host' => 'localhost',
         'username' => 'my_app',
         'password' => 'secret',
         'database' => 'my_app',
         'url' => env('DATABASE_URL', null),
      ],
      /*
         * The test connection is used during the test suite.
      */
      'test' => [
         'host' => 'localhost',
         //'port' => 'non_standard_port_number',
         'username' => 'my_app',
         'password' => 'secret',
         'database' => 'test_myapp',
         //'schema' => 'myapp',
      ],
   ],

Let us understand each parameter in detail in config/app_local.php.

config/app.php

'Datasources' => [
   'default' => [
      'classPanduan Ringkas CakePHP' => Connection::class,
      'driver' => Mysql::class,
      'persistent' => false,
      'timezone' => 'UTC',
      //'encoding' => 'utf8mb4',
      'flags' => [],
      'cacheMetadata' => true,
      'log' => false,
      'quoteIdentifiers' => false,
      //'init' => ['SET GLOBAL innodb_stats_on_metadata = 0'],
   ],
]   

Let us understand each parameter in detail in config/app.php.

Email Configuration

Email can be configured in file config/app.php. It is not required to define email configuration in config/app.php. Email can be used without it. Just use the respective methods to set all configurations separately or load an array of configs. Configuration for Email defaults is created using config() and configTransport().

Email Configuration Transport

By defining transports separately from delivery profiles, you can easily re-use transport configuration across multiple profiles. You can specify multiple configurations for production, development and testing. Each transport needs a classPanduan Ringkas CakePHP. Valid options are as follows −

• Mail − Send using PHP mail function

• Smtp − Send using SMTP

• Debug − Do not send the email, just return the result

You can add custom transports (or override existing transports) by adding the appropriate file to src/Mailer/Transport. Transports should be named YourTransport.php, where 'Your' is the name of the transport.

Following is the example of Email configuration transport.

'EmailTransport' => [
   'default' => [
      'classPanduan Ringkas CakePHP' => 'Mail',
      // The following keys are used in SMTP transports
      'host' => 'localhost',
      'port' => 25,
      'timeout' => 30,
      'username' => 'user',
      'password' => 'secret',
      'client' => null,
      'tls' => null,
      'url' => env('EMAIL_TRANSPORT_DEFAULT_URL', null),
   ],
],

Email Delivery Profiles

Delivery profiles allow you to predefine various properties about email messages from your application, and give the settings a name. This saves duplication across your application and makes maintenance and development easier. Each profile accepts a number of keys.

Following is an example of Email delivery profiles.

'Email' => [
   'default' => [
   
      'transport' => 'default',
      'from' => 'you@localhost',
   ],
],

CakePHP - Routing

In this chapter, we are going to learn the following topics related to routing −

• Introduction to Routing
• Connecting Routes
• Passing Panduan Ringkas CakePHP to Routes
• Generating urls
• Panduan Ringkas CakePHP urls

Introduction to Routing

In this section, we will see how you can implement routes, how you can pass arguments from URL to controller’s action, how you can generate URLs, and how you can redirect to a specific URL. Normally, routes are implemented in file config/routes.php. Routing can be implemented in two ways −

• static method
• scoped route builder

Here, is an example presenting both the types.

// Using the scoped route builder.
Router::scope('/', function ($routes) {
   $routes->connect('/', ['controller' => 'Panduan Ringkas CakePHPs', 'action' => 'index']);
});
// Using the static method.
Router::connect('/', ['controller' => 'Panduan Ringkas CakePHPs', 'action' => 'index']);

Both the methods will execute the index method of Panduan Ringkas CakePHPsPanduan Ringkas CakePHP. Out of the two methods, scoped route builder gives better performance.

Connecting Routes

Router::connect() method is used to connect routes. The following is the syntax of the method −

static Cake\Routing\Router::connect($route, $defaults =[], $options =[])

There are three arguments to the Router::connect() method −

• The first argument is for the URL template you wish to match.

• The second argument contains default values for your route elements.

• The third argument contains options for the route, which generally contains regular expression rules.

Here, is the basic format of a route −

$routes->connect(
   'URL template',
   ['default' => 'defaultValue'],
   ['option' => 'matchingRegex']
);

Example

Make changes in the config/routes.php file as shown below.

config/routes.php

<?php use Cake\Http\Middleware\CsrfProtectionMiddleware;
use Cake\Routing\Route\DashedRoute;
use Cake\Routing\RouteBuilder;
$routes->setRouteClass(DashedRoute::class);
$routes->scope('/', function (RouteBuilder $builder) {
   // Register scoped middleware for in scopes.
      $builder->registerMiddleware('csrf', new CsrfProtectionMiddleware([
      'httpOnly' => true,
   ]));
   $builder->applyMiddleware('csrf');
   $builder->connect('/', ['controller' => 'Tests', 'action' => 'show']);
   $builder->connect('/pages/*', ['controller' => 'Pages', 'action' => 'display']);
   $builder->fallbacks();
});

Create a TestsPanduan Ringkas CakePHP.php file at src/Panduan Ringkas CakePHP/TestsPanduan Ringkas CakePHP.php. Copy the following code in the controller file.

src/Panduan Ringkas CakePHP/TestsPanduan Ringkas CakePHP.php

<?php declare(strict_types=1);
namespace App\Panduan Ringkas CakePHP;
use Cake\Core\Configure;
use Cake\Http\Exception\ForbiddenException;
use Cake\Http\Exception\NotFoundException;
use Cake\Http\Response;
use Cake\View\Exception\MissingTemplateException;
class TestsPanduan Ringkas CakePHP extends AppPanduan Ringkas CakePHP {
   public function show()
   {
   }
}

Create a folder Tests under src/Template and under that folder, create a View file called show.php. Copy the following code in that file.

src/Template/Tests/show.php

<h1>This is CakePHP tutorial and this is an example of connecting routes.</h1>

Execute the above example by visiting the following URL which is available at http://localhost/cakephp4/

Output

The above URL will yield the following output.

Passed Panduan Ringkas CakePHP

Passed arguments are the arguments which are passed in the URL. These arguments can be passed to controller’s action. These passed arguments are given to your controller in three ways.

As arguments to the action method

Following example shows, how we can pass arguments to the action of the controller. Visit the following URL at http://localhost/cakephp4/tests/value1/value2

This will match the following route line.

$builder->connect('tests/:arg1/:arg2', ['controller' => 'Tests', 'action' => 'show'],['pass' => ['arg1', 'arg2']]);

Here, the value1 from URL will be assigned to arg1 and value2 will be assigned to arg2.

As numericallyindexed array

Once the argument is passed to the controller’s action, you can get the argument with the following statement.

$args = $this->request->params[‘pass’]

The arguments passed to controller’s action will be stored in $args variable.

Using routing array

The argument can also be passed to action by the following statement −

$routes->connect('/', ['controller' => 'Tests', 'action' => 'show',5,6]);

The above statement will pass two arguments 5, and 6 to TestPanduan Ringkas CakePHP’s show() method.

Example

Make Changes in the config/routes.php file as shown in the following program.

config/routes.php

<?php use Cake\Http\Middleware\CsrfProtectionMiddleware;
use Cake\Routing\Route\DashedRoute;
use Cake\Routing\RouteBuilder;
$routes->setRouteClass(DashedRoute::class);
$routes->scope('/', function (RouteBuilder $builder) {
// Register scoped middleware for in scopes.
$builder->registerMiddleware('csrf', new CsrfProtectionMiddleware([
      'httpOnly' => true,
   ]));
   $builder->applyMiddleware('csrf');
   $builder->connect('tests/:arg1/:arg2', ['controller' => 'Tests', 'action' => 'show'],['pass' => ['arg1', 'arg2']]);
   $builder->connect('/pages/*', ['controller' => 'Pages', 'action' => 'display']);
   $builder->fallbacks();
});

Create a TestsPanduan Ringkas CakePHP.php file at src/Panduan Ringkas CakePHP/TestsPanduan Ringkas CakePHP.php. Copy the following code in the controller file.

src/Panduan Ringkas CakePHP/TestsPanduan Ringkas CakePHP.php

<?php declare(strict_types=1);
namespace App\Panduan Ringkas CakePHP;
use Cake\Core\Configure;
use Cake\Http\Exception\ForbiddenException;
use Cake\Http\Exception\NotFoundException;
use Cake\Http\Response;
use Cake\View\Exception\MissingTemplateException;
class TestsPanduan Ringkas CakePHP extends AppPanduan Ringkas CakePHP {
public function show($arg1, $arg2) {
      $this->set('argument1',$arg1);
      $this->set('argument2',$arg2);
   }
}

Create a folder Tests at src/Template and under that folder create a View file called show.php. Copy the following code in that file.

src/Template/Tests/show.php.

<h1>This is CakePHP tutorial and this is an example of Passed arguments.</h1>
<?php echo "Argument-1:".$argument1."<br/>";
   echo "Argument-2:".$argument2."<br>";
?>

Execute the above example by visiting the following URL http://localhost/cakephp4/tests/Panduan Ringkas CakePHP/Kunal

Output

Upon execution, the above URL will produce the following output.

Generating URLs

This is a cool feature of CakePHP. Using the generated URLs, we can easily change the structure of URL in the application without modifying the whole code.

url( string|array|null $url null , boolean $full false )

The above function will take two arguments −

• The first argument is an array specifying any of the following - 'controller', 'action', 'plugin'. Additionally, you can provide routed elements or query string parameters. If string, it can be given the name of any valid url string.

• If true, the full base URL will be prepended to the result. Default is false.

Example

Make Changes in the config/routes.php file as shown in the following program.

config/routes.php

<?php use Cake\Http\Middleware\CsrfProtectionMiddleware;
use Cake\Routing\Route\DashedRoute;
use Cake\Routing\RouteBuilder;
$routes->setRouteClass(DashedRoute::class);
$routes->scope('/', function (RouteBuilder $builder) {
   // Register scoped middleware for in scopes.
   $builder->registerMiddleware('csrf', new CsrfProtectionMiddleware([
      'httpOnly' => true,
   ]));
   $builder->applyMiddleware('csrf');
   $builder->connect('/generate',['controller'=>'Generates','action'=>'show']);
   $builder->fallbacks();
});

Create a GeneratesPanduan Ringkas CakePHP.php file at src/Panduan Ringkas CakePHP/GeneratesPanduan Ringkas CakePHP.php. Copy the following code in the controller file.

src/Panduan Ringkas CakePHP/GeneratesPanduan Ringkas CakePHP.php

<?php declare(strict_types=1);
namespace App\Panduan Ringkas CakePHP;
21
use Cake\Core\Configure;
use Cake\Http\Exception\ForbiddenException;
use Cake\Http\Exception\NotFoundException;
use Cake\Http\Response;
use Cake\View\Exception\MissingTemplateException;
class GeneratesPanduan Ringkas CakePHP extends AppPanduan Ringkas CakePHP {
   public function show()
   {
   }
}

Create a folder Generates at src/Template and under that folder, create a View file called show.php. Copy the following code in that file.

src/Template/Generates/show.php

<h1>This is CakePHP tutorial and this is an example of Generating URLs<h1>
</h1>
</h1>

Execute the above example by visiting the following URL −

http://localhost/cakephp4/generate

Output

The above URL will produce the following output −

Panduan Ringkas CakePHP Routing

Panduan Ringkas CakePHP routing is useful, when we want to inform client applications that, this URL has been moved. The URL can be redirected using the following function −

static Cake\Routing\Router::redirect($route, $url, $options =[])

There are three arguments to the above function as follows −

• A string describing the template of the route.

• A URL to redirect to.

• An array matching the named elements in the route to regular expressions which that element should match.

Example

Make Changes in the config/routes.php file as shown below. Here, we have used controllers that were created previously.

config/routes.php

<?php use Cake\Http\Middleware\CsrfProtectionMiddleware;
use Cake\Routing\Route\DashedRoute;
use Cake\Routing\RouteBuilder;
$routes->setRouteClass(DashedRoute::class);
$routes->scope('/', function (RouteBuilder $builder) {
   // Register scoped middleware for in scopes.
   $builder->registerMiddleware('csrf', new CsrfProtectionMiddleware([
      'httpOnly' => true,
   ]));
   $builder->applyMiddleware('csrf');
   $builder->connect('/generate',['controller'=>'Generates','action'=>'show']);
   $builder->redirect('/redirect','https://tutorialspoint.com/');
   $builder->fallbacks();
});

Execute the above example by visiting the following URLs.

URL 1 − http://localhost/cakephp4/generate

Output for URL 1

URL 2 − http://localhost/cakephp4/redirect

Output for URL 2

You will be redirected to https://tutorialspoint.com

CakePHP - Panduan Ringkas CakePHPs

The controller as the name indicates controls the application. It acts like a bridge between models and views. Panduan Ringkas CakePHPs handle request data, makes sure that correct models are called and right response or view is rendered.

Methods in the controllers’ class are called actions. Each controller follows naming conventions. The Panduan Ringkas CakePHP class names are in plural form, Camel Cased, and end in Panduan Ringkas CakePHP — PostsPanduan Ringkas CakePHP.

AppPanduan Ringkas CakePHP

The AppConttroller class is the parent class of all applications’ controllers. This class extends the Panduan Ringkas CakePHP class of CakePHP. AppPanduan Ringkas CakePHP is defined at src/Panduan Ringkas CakePHP/AppPanduan Ringkas CakePHP.php. The file contains the following code.

<?php declare(strict_types=1);
namespace App\Panduan Ringkas CakePHP;
use Cake\Panduan Ringkas CakePHP\Panduan Ringkas CakePHP;
class AppPanduan Ringkas CakePHP extends Panduan Ringkas CakePHP {
   public function initialize(): void {
      parent::initialize();
      $this->loadComponent('RequestHandler');
      $this->loadComponent('Flash');
   }
}

AppPanduan Ringkas CakePHP can be used to load components that will be used in every controller of your application. The attributes and methods created in AppPanduan Ringkas CakePHP will be available in all controllers that extend it. The initialize() method will be invoked at the end of controller’s constructor to load components.

Panduan Ringkas CakePHP Actions

The methods in the controller class are called Actions. These actions are responsible for sending appropriate response for browser/user making the request. View is rendered by the name of action, i.e., the name of method in controller.

Example

class RecipesPanduan Ringkas CakePHP extends AppPanduan Ringkas CakePHP {
   public function view($id) {
      // Action logic goes here.
   }
   public function share($customerId, $recipeId) {
      // Action logic goes here.
   }
   public function search($query) {
      // Action logic goes here.
   }
}

As you can see in the above example, the RecipesPanduan Ringkas CakePHP has 3 actions − View, Share, and Search.

Panduan Ringkas CakePHPing

For redirecting a user to another action of the same controller, we can use the setAction() method. The following is the syntax for the setAction() method.

Cake\Panduan Ringkas CakePHP\Panduan Ringkas CakePHP::setAction($action, $args...)

The following code will redirect the user to index action of the same controller.

$this->setAction('index');

The following example shows the usage of the above method.

Example

Make changes in the config/routes.php file as shown in the following program.

config/routes.php

<?php use Cake\Http\Middleware\CsrfProtectionMiddleware;
use Cake\Routing\Route\DashedRoute;
use Cake\Routing\RouteBuilder;
$routes->setRouteClass(DashedRoute::class);
$routes->scope('/', function (RouteBuilder $builder) {
   // Register scoped middleware for in scopes.
   $builder->registerMiddleware('csrf', new CsrfProtectionMiddleware([
      'httpOnly' => true,
   ]));
   $builder->applyMiddleware('csrf'); 
   $builder->connect('/redirect-controller',['controller'=>'Panduan Ringkas CakePHPs','action'=>'action1']);
   $builder->connect('/redirect-controller2',['controller'=>'Panduan Ringkas CakePHPs','action'=>'action2']);
   $builder->fallbacks();
});

Create a Panduan Ringkas CakePHPsPanduan Ringkas CakePHP.php file at src/Panduan Ringkas CakePHP/Panduan Ringkas CakePHPsPanduan Ringkas CakePHP.php. Copy the following code in the controller file.

src/Panduan Ringkas CakePHP/Panduan Ringkas CakePHPsPanduan Ringkas CakePHP.php

<?php declare(strict_types=1);
namespace App\Panduan Ringkas CakePHP;
use Cake\Core\Configure;
use Cake\Http\Exception\ForbiddenException;
use Cake\Http\Exception\NotFoundException;
use Cake\Http\Response;
use Cake\View\Exception\MissingTemplateException;
class Panduan Ringkas CakePHPsPanduan Ringkas CakePHP extends AppPanduan Ringkas CakePHP {
   public function action1() {
   }
   public function action2(){
      echo "redirecting from action2";
      $this->setAction('action1');
   }
}

Create a directory Panduan Ringkas CakePHPs at src/Template and under that directory create a View file called action1.php. Copy the following code in that file.

src/Template/Panduan Ringkas CakePHPs/action1.php

<h1>This is an example of how to redirect within controller.</h1>

Execute the above example by visiting the following URL.

http://localhost/cakephp4/redirect-controller

Output

Upon execution, you will receive the following output.

Now, visit the following URL: http://localhost/cakephp4/redirect-controller2

The above URL will give you the following output.

Loading Models

In CakePHP, a model can be loaded using the loadModel() method. The following is the syntax for the loadModel() method −

Cake\Panduan Ringkas CakePHP\Panduan Ringkas CakePHP::loadModel(string $modelClass, string $type)

There are two arguments to the above function as follows −

• The first argument is the name of model class.

• The second argument is the type of repository to load.

Example

If you want to load Panduan Ringkas CakePHPs model in a controller, then it can be loaded by writing the following line in controller’s action.

$this->loadModel('Panduan Ringkas CakePHPs');

CakePHP - Views

The letter “V” in the MVC is for Views. Views are responsible for sending output to user based on request. View Classes is a powerful way to speed up the development process.

View Templates

The View Templates file of CakePHP gets data from controller and then render the output so that it can be displayed properly to the user. We can use variables, various control structures in template.

Template files are stored in src/Template/, in a directory named after the controller that uses the files, and named after the action it corresponds to. For example, the Viewfile for the Products controller’s “view()” action, would normally be found in src/Template/Products/view.php.

In short, the name of the controller (ProductsPanduan Ringkas CakePHP) is same as the name of the folder (Products) but without the word Panduan Ringkas CakePHP and name of action/method (view()) of the controller (ProductsPanduan Ringkas CakePHP) is same as the name of the View file(view.php).

View Panduan Ringkas CakePHP

View variables are variables which get the value from controller. We can use as many variables in view templates as we want. We can use the set() method to pass values to variables in views. These set variables will be available in both the view and the layout your action renders. The following is the syntax of the set() method.

Cake\View\View::set(string $var, mixed $value)

This method takes two arguments − the name of the variable and its value.

Example

Make Changes in the config/routes.php file as shown in the following program.

config/routes.php

<?php use Cake\Http\Middleware\CsrfProtectionMiddleware;
use Cake\Routing\Route\DashedRoute;
use Cake\Routing\RouteBuilder;
$routes->setRouteClass(DashedRoute::class);
$routes->scope('/', function (RouteBuilder $builder) {
   // Register scoped middleware for in scopes.
   $builder->registerMiddleware('csrf', new CsrfProtectionMiddleware([
      'httpOnly' => true,
   ]));
   $builder->applyMiddleware('csrf');
   $builder->connect('template',['controller'=>'Products','action'=>'view']);
   $builder->fallbacks();
});

Create a ProductsPanduan Ringkas CakePHP.php file at src/Panduan Ringkas CakePHP/ProductsPanduan Ringkas CakePHP.php. Copy the following code in the controller file.

src/Panduan Ringkas CakePHP/ProductsPanduan Ringkas CakePHP.php

<?php declare(strict_types=1);
namespace App\Panduan Ringkas CakePHP;
use Cake\Core\Configure;
use Cake\Http\Exception\ForbiddenException;
use Cake\Http\Exception\NotFoundException;
use Cake\Http\Response;
use Cake\View\Exception\MissingTemplateException;
class ProductsPanduan Ringkas CakePHP extends AppPanduan Ringkas CakePHP {
public function view(){
      $this->set('Product_Panduan Ringkas CakePHP','XYZ');
   }
}

Create a directory Products at src/Template and under that folder create a View file called view.php. Copy the following code in that file.

Value of variable is: <?php echo $Product_Panduan Ringkas CakePHP; ? >

Execute the above example by visiting the following URL.

http://localhost/cakephp4/template

Output

The above URL will produce the following output.

CakePHP - Extending Views

Many times, while making web pages, we want to repeat certain part of pages in other pages. CakePHP has such facility by which one can extend view in another view and for this, we need not repeat the code again.

The extend() method is used to extend views in View file. This method takes one argument, i.e., the name of the view file with path. Don’t use extension .ctp while providing the name of the View file.

Example

Make changes in the config/routes.php file as shown in the following program.

config/routes.php

<?php use Cake\Http\Middleware\CsrfProtectionMiddleware;
use Cake\Routing\Route\DashedRoute;
use Cake\Routing\RouteBuilder;
$routes->setRouteClass(DashedRoute::class);
$routes->scope('/', function (RouteBuilder $builder) {
   $builder->registerMiddleware('csrf', new CsrfProtectionMiddleware([
      'httpOnly' => true,
   ]));
   $builder->applyMiddleware('csrf');
   $builder->connect('extend',['controller'=>'Extends','action'=>'index']);
   $builder->fallbacks();
});

Create an ExtendsPanduan Ringkas CakePHP.php file at src/Panduan Ringkas CakePHP/ExtendsPanduan Ringkas CakePHP.php. Copy the following code in the controller file.

src/Panduan Ringkas CakePHP/ExtendsPanduan Ringkas CakePHP.php

<?php namespace App\Panduan Ringkas CakePHP;
   use App\Panduan Ringkas CakePHP\AppPanduan Ringkas CakePHP;
   class ExtendsPanduan Ringkas CakePHP extends AppPanduan Ringkas CakePHP{
      public function index(){
      }
   }
?>

Create a directory Extends at src/Template and under that folder create a View file called header.php. Copy the following code in that file.

src/Template/Extends/header.php

<div align="center">
   <h1>Common Header</h1>
</div>
= $this->fetch('content') ?>

Create another View under Extends directory called index.php. Copy the following code in that file. Here, we are extending the above view header.php.

src/Template/Extends/index.php

<?php $this->extend('header'); ?>
This is an example of extending view.

Execute the above example by visiting the following URL http://localhost/cakephp4/extend

Output

Upon execution, you will receive the following output.

CakePHP - View Elements

Certain parts of the web pages are repeated on multiple web pages, but at different locations. CakePHP can help us reuse these repeated parts. These reusable parts are called Elements - help box, extra menu, etc. An element is basically a mini-view. We can also pass variables in elements.

Cake\View\View::element(string $elementPath, array $data, array $options =[]

There are three arguments to the above function as follows −

• The first argument is the name of the template file in the /src/Template/element/ folder.

• The second argument is the array of data to be made available to the rendered view.

• The third argument is for the array of options. e.g. cache.

Out of the 3 arguments, the first one is compulsory, while the rest are optional.

Example

Create an element file at src/Template/element directory called helloworld.php. Copy the following code in that file.

src/Template/element/helloworld.php

<p>Hello World</p>

Create a folder Elems at src/Template and under that directory create a View file called index.php. Copy the following code in that file.

src/Template/Elems/index.php

Element Example: <?php echo $this->element('helloworld'); ?>

Make Changes in the config/routes.php file as shown in the following program.

config/routes.php

<?php use Cake\Http\Middleware\CsrfProtectionMiddleware;
use Cake\Routing\Route\DashedRoute;
use Cake\Routing\RouteBuilder;
$routes->setRouteClass(DashedRoute::class);
$routes->scope('/', function (RouteBuilder $builder) {
   $builder->registerMiddleware('csrf', new CsrfProtectionMiddleware([
      'httpOnly' => true,
   ]));
   $builder->applyMiddleware('csrf');
   $builder->connect('/element-example',['controller'=>'Elems','action'=>'index']);
   $builder->fallbacks();
});

Create an ElemsPanduan Ringkas CakePHP.php file at src/Panduan Ringkas CakePHP/ElemsPanduan Ringkas CakePHP.php. Copy the following code in the controller file.

src/Panduan Ringkas CakePHP/ElemsPanduan Ringkas CakePHP.php

<?php namespace App\Panduan Ringkas CakePHP;
   use App\Panduan Ringkas CakePHP\AppPanduan Ringkas CakePHP;
   class ElemsPanduan Ringkas CakePHP extends AppPanduan Ringkas CakePHP{
      public function index(){
      }
   }
?>

Execute the above example by visiting the following URL http://localhost/cakephp4/element-example

Output

Upon execution, the above URL will give you the following output.

CakePHP - View Events

There are several callbacks/events that we can use with View Events. These events are helpful to perform several tasks before something happens or after something happens. The following is a list of callbacks that can be used with CakePHP −

CakePHP - Working with Database

Working with database in CakePHP is very easy. We will understand the CRUD (Create, Read, Update, Delete) operations in this chapter.

Further, we also need to configure our database in config/app_local.php file.

'Datasources' => [
   'default' => [
      'host' => 'localhost',
      'username' => 'my_app',
      'password' => 'secret',
      'database' => 'my_app',
      'url' => env('DATABASE_URL', null),
   ],
   /*
      * The test connection is used during the test suite.
   */
   'test' => [
      'host' => 'localhost',
      //'port' => 'non_standard_port_number',
      'username' => 'my_app',
      'password' => 'secret',
      'database' => 'test_myapp',
      //'schema' => 'myapp',
   ],
],

The default connection has following details −

'host' => 'localhost',
   'username' => 'my_app',
   'password' => 'secret',
   'database' => 'my_app',

You can change the details, i.e. host, username, password and database as per your choice.

Once done, make sure it is updated in config/app_local.php in Datasources object.

Now, we will continue with above details, go to your phpmyadmin or mysql database and create user my_app as shown below −

Give the necessary privileges and save it. Now, we have the database details as per the configuration mentioned in app_local.php. When you check CakePHP home page, this is what you should get −

Now, we will create the following users’ table in the database.

CREATE TABLE `users` ( 
   `id` int(11) NOT NULL AUTO_INCREMENT,
   `username` varchar(50) NOT NULL, 
   `password` varchar(255) NOT NULL, PRIMARY KEY (`id`) 
) ENGINE=InnoDB AUTO_INCREMENT=7 DEFAULT CHARSET=latin1

Insert a Record

To insert a record in database, we first need to get hold of a table using TableRegistry class. We can fetch the instance out of registry using get() method. The get() method will take the name of the database table as an argument.

This new instance is used to create new entity. Set necessary values with the instance of new entity. We now have to call the save() method with TableRegistry class’s instance which will insert new record in database.

Example

Make changes in the config/routes.php file as shown in the following program.

config/routes.php

<?php use Cake\Http\Middleware\CsrfProtectionMiddleware;
use Cake\Routing\Route\DashedRoute;
use Cake\Routing\RouteBuilder;
$routes->setRouteClass(DashedRoute::class);
$routes->scope('/', function (RouteBuilder $builder) {
   $builder->registerMiddleware('csrf', new CsrfProtectionMiddleware([
      'httpOnly' => true,
   ]));
   $builder->applyMiddleware('csrf');
   //$builder->connect('/pages',['controller'=>'Pages','action'=>'display', 'home']);
   $builder->connect('/users/add', ['controller' => 'Users', 'action' => 'add']);
   $builder->fallbacks();
});

Create a UsersPanduan Ringkas CakePHP.php file at src/Panduan Ringkas CakePHP/UsersPanduan Ringkas CakePHP.php. Copy the following code in the controller file.

src/controller/UsersPanduan Ringkas CakePHP.php

<?php namespace App\Panduan Ringkas CakePHP;
use App\Panduan Ringkas CakePHP\AppPanduan Ringkas CakePHP;
use Cake\ORM\TableRegistry;
use Cake\Datasource\ConnectionManager;
use Cake\Auth\DefaultPasswordHasher;
class UsersPanduan Ringkas CakePHP extends AppPanduan Ringkas CakePHP{
   public function add(){
      if($this->request->is('post')){
         $username = $this->request->getData('username');
         $hashPswdObj = new DefaultPasswordHasher;
         $password = $hashPswdObj->hash($this->request->getData('password'));
         $users_table = TableRegistry::get('users');
         $users = $users_table->newEntity($this->request->getData());
         $users->username = $username;
         $users->password = $password;
         $this->set('users', $users);
         if($users_table->save($users))
         echo "User is added.";
      }
   }
}
?>

Create a directory Users at src/Template and under that directory create a View file called add.php. Copy the following code in that file.

src/Template/Users/add.php

<?php echo $this->Form->create(NULL,array('url'=>'/users/add'));
   echo $this->Form->control('username');
   echo $this->Form->control('password');
   echo $this->Form->button('Submit');
   echo $this->Form->end();
?>

Execute the above example by visiting the following URL. http://localhost/cakephp4/users/add

Output

Upon execution, you will receive the following output.

The data will be saved in the users table as shown below −

CakePHP - View a Record

To view records of database, we first need to get hold of a table using the TableRegistry class. We can fetch the instance out of registry using get() method. The get() method will take the name of the database table as argument.

Now, this new instance is used to find records from database using find() method. This method will return all records from the requested table.

Example

Make changes in the config/routes.php file as shown in the following code.

config/routes.php

<?php use Cake\Http\Middleware\CsrfProtectionMiddleware;
use Cake\Routing\Route\DashedRoute;
use Cake\Routing\RouteBuilder;
$routes->setRouteClass(DashedRoute::class);
$routes->scope('/', function (RouteBuilder $builder) {
   $builder->registerMiddleware('csrf', new CsrfProtectionMiddleware([
      'httpOnly' => true,
   ]));
   $builder->applyMiddleware('csrf');
   //$builder->connect('/pages',['controller'=>'Pages','action'=>'display', 'home']);
   $builder->connect('/users', ['controller' => 'Users', 'action' => 'index']);
   $builder->fallbacks();
});

Create a UsersPanduan Ringkas CakePHP.php file at src/Panduan Ringkas CakePHP/UsersPanduan Ringkas CakePHP.php. Copy the following code in the controller file.

src/controller/UsersPanduan Ringkas CakePHP.php

<?php namespace App\Panduan Ringkas CakePHP;
   use App\Panduan Ringkas CakePHP\AppPanduan Ringkas CakePHP;
   use Cake\ORM\TableRegistry;
   use Cake\Datasource\ConnectionManager;
   class UsersPanduan Ringkas CakePHP extends AppPanduan Ringkas CakePHP{
      public function index(){
         $users = TableRegistry::get('users');
         $query = $users->find();
         $this->set('results',$query);
      }
   }
?>

Create a directory Users at src/Template, ignore if already created, and under that directory create a View file called index.php. Copy the following code in that file.

src/Template/Users/index.ctp

<a href="add">Add User</a>

Execute the above example by visiting the following URL http://localhost/cakephp4/users

Output

Upon execution, the above URL will give you the following output.

CakePHP - Update a Record

To update a record in database, we first need to get hold of a table using TableRegistry class. We can fetch the instance out of registry using the get() method. The get() method will take the name of the database table as an argument. Now, this new instance is used to get particular record that we want to update.

Call the get() method with this new instance, and pass the primary key to find a record, which will be saved in another instance. Use this instance, to set new values that you want to update and then, finally call the save() method with the TableRegistry class’s instance to update record.

Example

Make changes in the config/routes.php file as shown in the following code.

config/routes.php

<?php use Cake\Http\Middleware\CsrfProtectionMiddleware;
use Cake\Routing\Route\DashedRoute;
use Cake\Routing\RouteBuilder;
$routes->setRouteClass(DashedRoute::class);
$routes->scope('/', function (RouteBuilder $builder) {
   $builder->registerMiddleware('csrf', new CsrfProtectionMiddleware([
      'httpOnly' => true,
   ]));
   $builder->applyMiddleware('csrf');
   //$builder->connect('/pages',['controller'=>'Pages','action'=>'display', 'home']);
   $builder->connect('/users/edit', ['controller' => 'Users', 'action' => 'edit']);
   $builder->fallbacks();
});

Create a UsersPanduan Ringkas CakePHP.php file at src/Panduan Ringkas CakePHP/UsersPanduan Ringkas CakePHP.php. Copy the following code in the controller file.

src/controller/UsersPanduan Ringkas CakePHP.php

<?php namespace App\Panduan Ringkas CakePHP;
   use App\Panduan Ringkas CakePHP\AppPanduan Ringkas CakePHP;
   use Cake\ORM\TableRegistry;
   use Cake\Datasource\ConnectionManager;
   class UsersPanduan Ringkas CakePHP extends AppPanduan Ringkas CakePHP{
      public function index(){
         $users = TableRegistry::get('users');
         $query = $users->find();
         $this->set('results',$query);
      }
      public function edit($id){
         if($this->request->is('post')){
            $username = $this->request->getData('username');
            $password = $this->request->getData('password');
            $users_table = TableRegistry::get('users');
            $users = $users_table->get($id);
            $users->username = $username;
            $users->password = $password;
            if($users_table->save($users))
            echo "User is udpated";
            $this->setAction('index');
         } else {
            $users_table = TableRegistry::get('users')->find();
            $users = $users_table->where(['id'=>$id])->first();
            $this->set('username',$users->username);
            $this->set('password',$users->password);
            $this->set('id',$id);
         }
      }
   }
?>

Create a directory Users at src/Template, ignore if already created, and under that directory create a view called index.php. Copy the following code in that file.

src/Template/Users/index.php

<a href="add">Add User</a>

Create another View file under the Users directory called edit.php and copy the following code in it.

src/Template/Users/edit.php

<?php echo $this->Form->create(NULL,array('url'=>'/users/edit/'.$id));
   echo $this->Form->control('username',['value'=>$username]);
   echo $this->Form->control('password',['value'=>$password]);
   echo $this->Form->button('Submit');
   echo $this->Form->end();
?>

Execute the above example by visiting the following URL and click on Edit link to edit record.

http://localhost/cakephp4/users

Output

After visiting the above URL, it will display the records in users table as shown below −

Click on Edit button and it will display you following screen −

Now, we will update the name Panduan Ringkas CakePHP to Panduan Ringkas CakePHP123 and submit the details. The next screen displayed will be as follows −

CakePHP - Delete a Record

To delete a record in database, we first need to get hold of a table using the TableRegistry class. We can fetch the instance out of registry using the get() method. The get() method will take the name of the database table as an argument. Now, this new instance is used to get particular record that we want to delete.

Call the get() method with this new instance and pass the primary key to find a record which will be saved in another instance. Use the TableRegistry class’s instance to call the delete method to delete record from database.

Example

Make changes in the config/routes.php file as shown in the following code.

config/routes.php

<?php use Cake\Http\Middleware\CsrfProtectionMiddleware;
use Cake\Routing\Route\DashedRoute;
use Cake\Routing\RouteBuilder;
$routes->setRouteClass(DashedRoute::class);
$routes->scope('/', function (RouteBuilder $builder) {
   $builder->registerMiddleware('csrf', new CsrfProtectionMiddleware([
      'httpOnly' => true,
   ]));
   $builder->applyMiddleware('csrf');
   //$builder->connect('/pages',['controller'=>'Pages','action'=>'display', 'home']);
   $builder->connect('/users/delete', ['controller' => 'Users', 'action' => 'delete']);
   $builder->fallbacks();
});

Create a UsersPanduan Ringkas CakePHP.php file at src/Panduan Ringkas CakePHP/UsersPanduan Ringkas CakePHP.php. Copy the following code in the controller file.

src/controller/UsersPanduan Ringkas CakePHP.php

<?php namespace App\Panduan Ringkas CakePHP;
   use App\Panduan Ringkas CakePHP\AppPanduan Ringkas CakePHP;
   use Cake\ORM\TableRegistry;
   use Cake\Datasource\ConnectionManager;
   class UsersPanduan Ringkas CakePHP extends AppPanduan Ringkas CakePHP{
      public function index(){
         $users = TableRegistry::get('users');
         $query = $users->find();
         $this->set('results',$query);
      }
      public function delete($id){
         $users_table = TableRegistry::get('users');
         $users = $users_table->get($id);
         $users_table->delete($users);
         echo "User deleted successfully.";
         $this->setAction('index');
      }
   }
?>

Just create an empty View file under Users directory called delete.ctp.

src/Template/Users/delete.ctp

Create a directory Users at src/Template, ignore if already created, and under that directory create a Viewfile called index.ctp. Copy the following code in that file.

src/Template/Users/index.ctp

<a href="add">Add User</a>

Execute the above example by visiting the following URL and click on Delete link to delete record.

http://localhost:85/CakePHP/users

Output

After visiting the above URL and clicking on the Delete link, you will receive the following output where you can delete record.

Click on Delete link to delete the record.

CakePHP - Services

This chapter deals with the information about the authentication process available in CakePHP.

Panduan Ringkas CakePHP

Panduan Ringkas CakePHP is the process of identifying the correct user. CakePHP supports three types of authentication.

• FormAuthenticate − It allows you to authenticate users based on form POST data. Usually, this is a login form that users enter information into. This is default authentication method.

• BasicAuthenticate − It allows you to authenticate users using Basic HTTP authentication

• DigestAuthenticate − It allows you to authenticate users using Digest HTTP authentication.

Example for FormPanduan Ringkas CakePHP

Make changes in the config/routes.php file as shown in the following code.

config/routes.php

<?php use Cake\Core\Plugin;
use Cake\Routing\RouteBuilder;
use Cake\Routing\Router;
Router::defaultRouteClass('DashedRoute');
Router::scope('/', function (RouteBuilder $routes) {
   $routes->connect('/auth',['controller'=>'Authexs','action'=>'index']);
   $routes->connect('/login',['controller'=>'Authexs','action'=>'login']);
   $routes->connect('/logout',['controller'=>'Authexs','action'=>'logout']);
   $routes->fallbacks('DashedRoute');
});
Plugin::routes();

Change the code of AppPanduan Ringkas CakePHP.php file as shown in the following program.

src/Panduan Ringkas CakePHP/AppPanduan Ringkas CakePHP.php

<?php namespace App\Panduan Ringkas CakePHP;
use Cake\Panduan Ringkas CakePHP\Panduan Ringkas CakePHP;
use Cake\Event\Event;
use Cake\Panduan Ringkas CakePHP\Component\AuthComponent;
class AppPanduan Ringkas CakePHP extends Panduan Ringkas CakePHP {
   public function initialize() {
      parent::initialize();
      $this->loadComponent('RequestHandler');
      $this->loadComponent('Flash');
         $this->loadComponent('Auth', [
            'authenticate' => [
               'Form' => [
                  'fields' => [
               'username' => 'username',
               'password' => 'password'
            ]
         ]
      ],
      'loginAction' => [
         'controller' => 'Authexs',
         'action' => 'login'
      ],
      'loginPanduan Ringkas CakePHP' => [
         'controller' => 'Authexs',
         'action' => 'index'
      ],
      'logoutPanduan Ringkas CakePHP' => [
         'controller' => 'Authexs',
         'action' => 'login'
      ]
   ]);
}
public function beforeFilter(Event $event) {
      $this->Auth->allow(['index','view']);
      $this->set('loggedIn', $this->Auth->user());
   }
}

Create AuthexsPanduan Ringkas CakePHP.php file at src/Panduan Ringkas CakePHP/AuthexsPanduan Ringkas CakePHP.php. Copy the following code in the controller file.

src/Panduan Ringkas CakePHP/AuthexsPanduan Ringkas CakePHP.php

<?php namespace App\Panduan Ringkas CakePHP;
use App\Panduan Ringkas CakePHP\AppPanduan Ringkas CakePHP;
use Cake\ORM\TableRegistry;
use Cake\Datasource\ConnectionManager;
use Cake\Event\Event;
use Cake\Auth\DefaultPasswordHasher;
class AuthexsPanduan Ringkas CakePHP extends AppPanduan Ringkas CakePHP {
   var $components = array('Auth');
   public function index(){
   }
   public function login(){
      if($this->request->is('post')) {
         $user = $this->Auth->identify();
         if($user){
            $this->Auth->setUser($user);
            return $this->redirect($this->Auth->redirectUrl());
         } else
         $this->Flash->error('Your username or password is incorrect.');
      }
   }
   public function logout(){
      return $this->redirect($this->Auth->logout());
   } 
}
?>

Create a directory Authexs at src/Template and under that directory create a View file called login.php. Copy the following code in that file.

src/Template/Authexs/login.php

<?php echo $this->Form->create();
   echo $this->Form->control('username');
   echo $this->Form->control('password');
   echo $this->Form->button('Submit');
   echo $this->Form->end();
?>

Create another View file called logout.php. Copy the following code in that file.

src/Template/Authexs/logout.php

You are successfully logged out.

Create another View file called index.php. Copy the following code in that file.

src/Template/Authexs/index.php

You are successfully logged in. 
<?php echo $this->Html->link('logout',[
      "controller" => "Authexs","action" => "logout"
   ]); 
?>

Execute the above example by visiting the following URL.

http://localhost/cakephp4/auth

Output

Memandangkan pengesahan telah dilaksanakan, dan sebaik sahaja anda cuba melawati URL di atas, anda akan dialihkan ke halaman log masuk seperti yang ditunjukkan di bawah.

Selepas memberikan bukti kelayakan yang betul, anda akan dilog masuk dan diubah hala ke skrin seperti yang ditunjukkan di bawah.

Selepas mengklik pada pautan log keluar, anda akan diubah hala ke skrin log masuk sekali lagi.

CakePHP - Ralat & Pengendalian Pengecualian

Kegagalan sistem perlu ditangani dengan berkesan untuk kelancaran sistem. CakePHP datang dengan perangkap ralat lalai, yang mencetak dan mencatat ralat semasa ia berlaku. Pengendali ralat yang sama ini digunakan untuk menangkap Pengecualian.

Pengendali ralat memaparkan ralat, apabila nyahpepijat adalah benar dan log ralat, apabila nyahpepijat adalah palsu. CakePHP mempunyai bilangan kelas pengecualian dan pengendalian pengecualian terbina dalam akan menangkap sebarang pengecualian yang tidak ditangkap dan menjadikan halaman berguna.

Ralat dan Konfigurasi Pengecualian

Ralat dan Pengecualian boleh dikonfigurasikan dalam fail configapp.php. Pengendalian ralat menerima beberapa pilihan yang membolehkan anda menyesuaikan pengendalian ralat untuk aplikasi anda −

Example

Make changes in the config/routes.php file as shown in the following code.

config/routes.php

<?php use Cake\Http\Middleware\CsrfProtectionMiddleware;
use Cake\Routing\Route\DashedRoute;
use Cake\Routing\RouteBuilder;
$routes->setRouteClass(DashedRoute::class);
$routes->scope('/', function (RouteBuilder $builder) {
   $builder->registerMiddleware('csrf', new CsrfProtectionMiddleware([
      'httpOnly' => true,
   ]));
   $builder->applyMiddleware('csrf');
   //$builder->connect('/pages',['controller'=>'Pages','action'=>'display', 'home']);
   $builder->connect('/exception/:arg1/:arg2',
      ['controller'=>'Exps','action'=>'index'],
      ['pass' => ['arg1', 'arg2']]);
   $builder->fallbacks();
});

Salin selepas log masuk

Create ExpsPanduan Ringkas CakePHP.php file at src/Panduan Ringkas CakePHP/ExpsPanduan Ringkas CakePHP.php. Copy the following code in the controller file.

src/Panduan Ringkas CakePHP/ExpsPanduan Ringkas CakePHP.php

<?php namespace App\Panduan Ringkas CakePHP;
   use App\Panduan Ringkas CakePHP\AppPanduan Ringkas CakePHP;
   use Cake\Core\Exception\Exception;
   class ExpsPanduan Ringkas CakePHP extends AppPanduan Ringkas CakePHP {
      public function index($arg1,$arg2) {
         try{
            $this->set('argument1',$arg1);
            $this->set('argument2',$arg2);
            if(($arg1 > 1 || $arg1 > 10) || ($arg2  10))
               throw new Exception("One of the number is out of range [1-10].");
         } catch(\Exception $ex){
            echo $ex->getMessage();
         }
      }
   }
?>

Salin selepas log masuk

Create a directory Exps at src/Template and under that directory create a View file called index.php. Copy the following code in that file.

src/Template/Exps/index.php

This is CakePHP tutorial and this is an example of Passed arguments.<br>
Argument-1: =$argument1?><br>
Argument-2: =$argument2?><br>

Salin selepas log masuk

Execute the above example by visiting the following URL.

http://localhost/cakephp4/exception/5/0

Output

Upon execution, you will receive the following output.

CakePHP - Logging

Logging in CakePHP is a very easy task. You just have to use one function. You can log errors, exceptions, user activities, action taken by users, for any background process like cronjob. Logging data in CakePHP is easy. The log() function is provided by the LogTrait, which is the common ancestor for almost all CakePHP classes.

Logging Configuration

We can configure the log in file config/app.php. There is a log section in the file, where you can configure logging options as shown in the following screenshot.

By default, you will see two log levels − error and debug already configured for you. Each will handle different level of messages.

CakePHP supports various logging levels as shown below −

• Emergency − System is unusable

• Alert − Action must be taken immediately

• Critical − Critical conditions

• Error − Error conditions

• Warning − Warning conditions

• Notice − Normal but significant condition

• Info − Informational messages

• Debug − Debug-level messages

Writing to Log file

There are two ways by which, we can write in a Log file.

The first is to use the static write() method. The following is the syntax of the static write() method.

Pilihan	Jenis Data	Penerangan
errorLevel	int	Option Data Type Description errorLevel int The level of errors you are interested in capturing. Use the built-in php error constants, and bitmasks to select the level of error you are interested in. trace bool Include stack traces for errors in log files. Stack traces will be included in the log after each error. This is helpful for finding where/when errors are being raised. exceptionRenderer string The class responsible for rendering uncaught exceptions. If you choose a custom class, you should place the file for that class in src/Error. This class needs to implement a render() method. log bool When true, exceptions + their stack traces will be logged to CakeLogLog. skipLog array An array of exception class names that should not be logged. This is useful to remove NotFoundExceptions or other common, but uninteresting logs messages. extraFatalErrorMemory int Set to the number of megabytes to increase the memory limit by, when a fatal error is encountered. This allows breathing room to complete logging or error handling. Tahap ralat yang anda berminat untuk tangkap. Gunakan pemalar ralat php terbina dalam dan bitmasks untuk memilih tahap ralat yang anda minati.
jejak	bool	Sertakan surih tindanan untuk ralat dalam fail log. Surih tindanan akan dimasukkan dalam log selepas setiap ralat. Ini berguna untuk mencari tempat/bila ralat ditimbulkan.
exceptionRenderer	rentetan	Kelas yang bertanggungjawab untuk memberikan pengecualian yang tidak ditangkap. Jika anda memilih kelas tersuai, anda harus meletakkan fail untuk kelas tersebut dalam src/Error. Kelas ini perlu melaksanakan kaedah render().
log	bool	Apabila benar, pengecualian + surih tindanannya akan dilog ke CakeLogLog.
skipLog	tatasusunan	Susun atur nama kelas pengecualian yang tidak sepatutnya dilog. Ini berguna untuk mengalih keluar NotFoundExceptions atau mesej log biasa tetapi tidak menarik yang lain.
extraFatalErrorMemory	int	Tetapkan kepada bilangan megabait untuk meningkatkan had memori sebanyak, apabila ralat maut ditemui. Ini membolehkan ruang pernafasan menyelesaikan pembalakan atau pengendalian ralat.

Syntax	write( integer|string $level, mixed $message, string|array $context [] )
Parameters	The severity level of the message being written. The value must be an integer or string matching a known level. Message content to log. Additional data to be used for logging the message. The special scope key can be passed to be used for further filtering of the log engines to be used. If a string or a numerically index array is passed, it will be treated as the scope key. See Cake\Log\Log::config() for more information on logging scopes.
Returns	boolean
Description	Writes the given message and type to all of the configured log adapters. Configured adapters are passed both the $level and $message variables. $level is one of the following strings/values.

The second is to use the log() shortcut function available on any using the LogTrait Calling log() will internally call Log::write() −

Example

Make changes in the config/routes.php file as shown in the following program.

config/routes.php

<?php use Cake\Http\Middleware\CsrfProtectionMiddleware;
use Cake\Routing\Route\DashedRoute;
use Cake\Routing\RouteBuilder;
$routes->setRouteClass(DashedRoute::class);
$routes->scope('/', function (RouteBuilder $builder) {
   $builder->registerMiddleware('csrf', new CsrfProtectionMiddleware([
      'httpOnly' => true,
   ]));
   $builder->applyMiddleware('csrf');
   //$builder->connect('/pages',
      ['controller'=>'Pages','action'=>'display', 'home']);
   $builder->connect('logex',['controller'=>'Logexs','action'=>'index']);
   $builder->fallbacks();
});

Create a LogexsPanduan Ringkas CakePHP.php file at src/Panduan Ringkas CakePHP/LogexsPanduan Ringkas CakePHP.php. Copy the following code in the controller file.

src/Panduan Ringkas CakePHP/LogexsPanduan Ringkas CakePHP.php

<?php namespace App\Panduan Ringkas CakePHP;
   use App\Panduan Ringkas CakePHP\AppPanduan Ringkas CakePHP;
   use Cake\Log\Log;
   class LogexsPanduan Ringkas CakePHP extends AppPanduan Ringkas CakePHP{
      public function index(){
         /*The first way to write to log file.*/
         Log::write('debug',"Something didn't work.");
         /*The second way to write to log file.*/
         $this->log("Something didn't work.",'debug');
      }
   }
?>

Create a directory Logexs at src/Template and under that directory create a View file called index.php. Copy the following code in that file.

src/Template/Logexs/index.php

Something is written in log file. Check log file logs\debug.log

Execute the above example by visiting the following URL.

http://localhost/cakephp4/logex

Output

Upon execution, you will receive the following output.

The logs will be added to log/debug.log file −

CakePHP - Form Handling

CakePHP provides various in built tags to handle HTML forms easily and securely. Like many other PHP frameworks, major elements of HTML are also generated using CakePHP. Following are the various functions used to generate HTML elements.

The following functions are used to generate select options −

The following functions are used to generate HTML select element.

The following functions are used to generate button on HTML page.

The following functions are used to generate checkbox on HTML page.

Fungsi berikut digunakan untuk mencipta borang pada halaman HTML.

pada halaman HTML.

Fungsi berikut digunakan untuk mencipta elemen tersembunyi pada halaman HTML.

The following functions are used to generate textarea element on HTML page.

Example

Make changes in the config/routes.php file as shown in the following code.

config/routes.php

<?php use Cake\Http\Middleware\CsrfProtectionMiddleware;
use Cake\Routing\Route\DashedRoute;
use Cake\Routing\RouteBuilder;
$routes->setRouteClass(DashedRoute::class);
$routes->scope('/', function (RouteBuilder $builder) {
   $builder->registerMiddleware('csrf', new CsrfProtectionMiddleware([
      'httpOnly' => true,
   ]));
   $builder->applyMiddleware('csrf');
   //$builder->connect('/pages',['controller'=>'Pages','action'=>'display', 'home']);
   $builder->connect('register',['controller'=>'Registrations','action'=>'index']);
   $builder->fallbacks();
});

Create a RegistrationsPanduan Ringkas CakePHP.php file at

src/Panduan Ringkas CakePHP/RegistrationsPanduan Ringkas CakePHP.php. Copy the following code in the controller file.

src/Panduan Ringkas CakePHP/RegistrationsPanduan Ringkas CakePHP.php

<?php namespace App\Panduan Ringkas CakePHP;
   use App\Panduan Ringkas CakePHP\AppPanduan Ringkas CakePHP;
   class RegistrationsPanduan Ringkas CakePHP extends AppPanduan Ringkas CakePHP{
      public function index(){
         $country = array('India','United State of America','United Kingdom');
         $this->set('country',$country);
         $gender = array('Male','Female');
         $this->set('gender',$gender);
      }
   }
?>

Create a directory Registrations at src/Template and under that directory, create a View file called index.php. Copy the following code in that file.

src/Template/Registrations/index.php

<?php echo $this->Form->create(NULL,array('url'=>'/register'));
   echo '<label for="country">Country</label>';
   echo $this->Form->select('country',$country);
   echo '<label for="gender">Gender</label>';
   echo $this->Form->radio('gender ',$gender);
   echo '<label for="address">Address</label>';
   echo $this->Form->textarea('address');
   echo $this->Form->file('profilepic');
   echo '<div>'.$this->Form->checkbox('terms').
      '<label for="country">Terms &mp; Panduan Ringkas CakePHPs</label>
</div>';
   echo $this->Form->button('Submit');
   echo $this->Form->end();
?>

Execute the above example by visiting the following URL −

http://localhost/cakephp4/register

Output

Upon execution, you will receive the following output.

CakePHP - Internationalization

Like many other frameworks, CakePHP also supports Internationalization. We need to follow these steps to go from single language to multiple language.

Step 1

Create a separate locales directory resources\locales.

Step 2

Create subdirectory for each language, under the directory src\Locale. The name of the subdirectory can be two letter ISO code of the language or full locale name like en_US, fr_FR etc.

Step 3

Create separate default.po file under each language subdirectory. This file contains entry in the form of msgid and msgstr, as shown in the following program.

msgid "msg"
msgstr "CakePHP Internationalization example."

Here, the msgid is the key which will be used in the View template file and msgstr is the value which stores the translation.

Step 4

In the View template file, we can use the above msgid, as shown below which will be translated based on the set value of locale.

<?php echo __('msg'); ?>

The default locale can be set in the config/app.php file by the following line.

'defaultLocale' => env('APP_DEFAULT_LOCALE', 'en_US')

To change the local at runtime, we can use the following lines.

use Cake\I18n\I18n;
I18n::locale('de_DE');

Example

Make changes in the config/routes.php file as shown in the following program.

config/routes.php

<?php use Cake\Http\Middleware\CsrfProtectionMiddleware;
use Cake\Routing\Route\DashedRoute;
use Cake\Routing\RouteBuilder;
$routes->setRouteClass(DashedRoute::class);
$routes->scope('/', function (RouteBuilder $builder) {
   $builder->registerMiddleware('csrf', new CsrfProtectionMiddleware([
      'httpOnly' => true,
   ]));
   $builder->applyMiddleware('csrf');
   //$builder->connect('/pages',
      ['controller'=>'Pages','action'=>'display', 'home']);
   $builder->connect('locale',
      ['controller'=>'Localizations','action'=>'index']);
   $builder->fallbacks();
});

Create a LocalizationsPanduan Ringkas CakePHP.php file at src/Panduan Ringkas CakePHP/LocalizationsPanduan Ringkas CakePHP.php. Copy the following code in the controller file.

src/Panduan Ringkas CakePHP/LocalizationsPanduan Ringkas CakePHP.php

<?php namespace App\Panduan Ringkas CakePHP;
   use App\Panduan Ringkas CakePHP\AppPanduan Ringkas CakePHP;
   use Cake\I18n\I18n;
   class LocalizationsPanduan Ringkas CakePHP extends AppPanduan Ringkas CakePHP {
      public function index() {
         if($this->request->is('post')) {
            $locale = $this->request->getData('locale');
            I18n::setLocale($locale);
         }
      }
   }
?>

Create a locales directory at resources\locales. Create 3 directories called en_US, fr_FR, de_DE under the locales directory. Create a file under each directory called default.po. Copy the following code in the respective file.

resources/locales/en_US/default.po

msgid "msg"
msgstr "CakePHP Internationalization example."

resources/locales/fr_FR/default.po

msgid "msg"
msgstr "Exemple CakePHP internationalisation."

resources/locales/de_DE/default.po

msgid "msg"
msgstr "CakePHP Internationalisierung Beispiel."

Create a directory Localizations at src/Template and under that directory, create a View file called index.php. Copy the following code in that file.

src/Template/Localizations/index.php

Form->create(NULL,array('url'=>'/locale'));
   echo $this->Form->radio("locale",
      [
         ['value'=>'en_US','text'=>'Panduan Ringkas CakePHP'],
         ['value'=>'de_DE','text'=>'German'],
         ['value'=>'fr_FR','text'=>'French'],
      ]
   );
   echo $this->Form->button('Change Language');
   echo $this->Form->end();
?>
<?php echo __('msg'); ?>

Execute the above example by visiting the following URL. http://localhost/cakephp4/locale

Output

Upon execution, you will receive the following output.

Email

CakePHP provides Email class to manage email related functionalities. To use email functionality in any controller, we first need to load the Email class by writing the following line.

use Cake\Mailer\Email;

The Email class provides various useful methods which are described below.

Example

Make changes in the config/routes.php file as shown in the following program.

config/routes.php

<?php use Cake\Http\Middleware\CsrfProtectionMiddleware;
use Cake\Routing\Route\DashedRoute;
use Cake\Routing\RouteBuilder;
$routes->setRouteClass(DashedRoute::class);
$routes->scope('/', function (RouteBuilder $builder) {
   $builder->registerMiddleware('csrf', new CsrfProtectionMiddleware([
      'httpOnly' => true,
   ]));
   $builder->applyMiddleware('csrf');
   //$builder->connect('/pages',['controller'=>'Pages','action'=>'display', 'home']);
   $builder->connect('/email',['controller'=>'Emails','action'=>'index']);
   $builder->fallbacks();
});

Create an EmailsPanduan Ringkas CakePHP.php file at src/Panduan Ringkas CakePHP/EmailsPanduan Ringkas CakePHP.php. Copy the following code in the controller file.

src/Panduan Ringkas CakePHP/EmailsPanduan Ringkas CakePHP.php

<?php namespace App\Panduan Ringkas CakePHP;
   use App\Panduan Ringkas CakePHP\AppPanduan Ringkas CakePHP;
   use Cake\Mailer\Email;
   class EmailsPanduan Ringkas CakePHP extends AppPanduan Ringkas CakePHP{
      public function index(){
         $email = new Email('default');
         $email->to('abc@gmail.com')
            ->subject('About')
            ->send('My message');
      }
   }
?>

Create a directory Emails at src/Template and under that directory, create a View file called index.php. Copy the following code in that file.

src/Template/Emails/index.php

Email Sent.

Before we send any email, we need to configure it. In the below screenshot, you can see that there are two transports, default and Gmail. We have used Gmail transport.

You need to replace the “GMAIL USERNAME” with your Gmail username and “APP PASSWORD” with your applications password. You need to turn on 2-step verification in Gmail and create a new APP password to send email.

config/app.php

Execute the above example by visiting the following URL − http://localhost/cakephp/email

Output

Upon execution, you will receive the following output.

CakePHP - Session Management

Session allows us to manage unique users across requests, and stores data for specific users. Session data can be accessible anywhere, anyplace, where you have access to request object, i.e., sessions are accessible from controllers, views, helpers, cells, and components.

Accessing Session Object

Session object can be created by executing the following code.

$session = $this->request->session();

Writing Session Data

To write something in session, we can use the write() session method.

Session::write($key, $value)

The above method will take two arguments, the value and the key under, which the value will be stored.

Example

$session->write('name', 'Panduan Ringkas CakePHP Gandhi');

Reading Session Data

To retrieve stored data from session, we can use the read() session method.

Session::read($key)

The above function will take only one argument, that is the key of the value, which was used at the time of writing session data. Once the correct key was provided, then the function will return its value.

Example

$session->read('name');

When you want to check whether, particular data exists in the session or not, then you can use the check() session method.

Session::check($key)

The above function will take only key as the argument.

Example

if ($session->check('name')) {
   // name exists and is not null.
}

Delete Session Data

To delete data from session, we can use the delete() session method to delete the data.

Session::delete($key)

The above function will take only key of the value to be deleted from session.

Example

$session->delete('name');

When you want to read and then delete data from session then, we can use the consume() session method.

static Session::consume($key)

The above function will take only key as argument.

Example

$session->consume('name');

Destroying a Session

We need to destroy a user session, when the user logs out from the site and to destroy the session the destroy() method is used.

Session::destroy()

Example

$session->destroy();

Destroying session will remove all session data from server, but will not remove session cookie.

Renew a Session

In a situation, where you want to renew user session then, we can use the renew() session method.

Session::renew()

Example

$session->renew();

Complete Session

Make changes in the config/routes.php file as shown in the following program.

config/routes.php

<?php use Cake\Http\Middleware\CsrfProtectionMiddleware;
use Cake\Routing\Route\DashedRoute;
use Cake\Routing\RouteBuilder;
$routes->setRouteClass(DashedRoute::class);
$routes->scope('/', function (RouteBuilder $builder) {
   $builder->registerMiddleware('csrf', new CsrfProtectionMiddleware([
      'httpOnly' => true,
   ]));
   $builder->applyMiddleware('csrf');
   //$builder->connect('/pages',['controller'=>'Pages','action'=>'display', 'home']);
   $builder->connect('/session-object',['controller'=>'Sessions','action'=>'index']);
   $builder->connect('/session-read',['controller'=>'Sessions','action'=>'retrieve_session_data']);
   $builder->connect('/session-write',['controller'=>'Sessions','action'=> 'write_session_data']);
   $builder->connect('/session-check',['controller'=>'Sessions','action'=>'check_session_data']);
   $builder->connect('/session-delete',['controller'=>'Sessions','action'=>'delete_session_data']);
   $builder->connect('/session-destroy',['controller'=>'Sessions','action'=>'destroy_session_data']);
   $builder->fallbacks();
});

Create a SessionsPanduan Ringkas CakePHP.php file at src/Panduan Ringkas CakePHP/SessionsPanduan Ringkas CakePHP.php. Copy the following code in the controller file

src/Panduan Ringkas CakePHP/SessionsPanduan Ringkas CakePHP.php

<?php namespace App\Panduan Ringkas CakePHP;
use App\Panduan Ringkas CakePHP\AppPanduan Ringkas CakePHP;
   class SessionsPanduan Ringkas CakePHP extends AppPanduan Ringkas CakePHP {
   public function retrieveSessionData() {
      //create session object
      $session = $this->request->getSession();
      //read data from session
      $name = $session->read('name');
      $this->set('name',$name);
   }
   public function writeSessionData(){
      //create session object
      $session = $this->request->getSession();
      //write data in session
      $session->write('name','Panduan Ringkas CakePHP Gandhi');
   }
   public function checkSessionData(){
      //create session object
      $session = $this->request->getSession();
      //check session data
      $name = $session->check('name');
      $address = $session->check('address');
      $this->set('name',$name);
      $this->set('address',$address);
   }
   public function deleteSessionData(){
      //create session object
      $session = $this->request->getSession();
      //delete session data
      $session->delete('name');
   }
   public function destroySessionData(){
      //create session object
      $session = $this->request->getSession();
      //destroy session
      $session->destroy();
   }
}
?>

Create a directory Sessions at src/Template and under that directory create a View file called write_session_data.php. Copy the following code in that file.

src/Template/Sessions/write_session_data.php

The data has been written in session.

Create another View file called retrieve_session_data.php under the same Sessions directory and copy the following code in that file.

src/Template/Sessions/retrieve_session_data.php

Here is the data from session.
Panduan Ringkas CakePHP: =$name;?>

Create another View file called check_session_data.ctp under the same Sessions directory and copy the following code in that file.

src/Template/Sessions/check_session_data.ctp

<?php if($name): ?>
name exists in the session.
<?php else: ?>
name doesn't exist in the database
<?php endif;?>
<?php if($address): ?>
address exists in the session.
<?php else: ?>
address doesn't exist in the database
<?php endif;?>

Create another View file called delete_session_data.ctp, under the same Sessions directory and copy the following code in that file.

src/Template/Sessions/delete_session_data.ctp

Data deleted from session.

Create another View file called destroy_session_data.ctp, under the same Sessions directory and copy the following code in that file.

src/Template/Sessions/destroy_session_data.ctp

Session Panduan Ringkas CakePHP.

Output

Execute the above example by visiting the following URL. This URL will help you write data in session.

http://localhost/cakephp4/session-write

Visit the following URL to read session data − http://localhost/cakephp4/session-read

Visit the following URL to check session data − http://localhost/cakephp4/session-check

Visit the following URL to delete session data − http://localhost/cakephp4/session-delete Visit the

Visit the following URL to destroy session data − http://localhost/cakephp4/session-destroy

CakePHP - Panduan Ringkas CakePHP Management

Handling Panduan Ringkas CakePHP with CakePHP is easy and secure. There is a Panduan Ringkas CakePHPComponent class which is used for managing Panduan Ringkas CakePHP. The class provides several methods for working with Panduan Ringkas CakePHPs.

To work with cookies, add this 2 classes to your controller −

use Cake\Http\Panduan Ringkas CakePHP\Panduan Ringkas CakePHP;
use Cake\Http\Panduan Ringkas CakePHP\Panduan Ringkas CakePHPCollection;

The cookie object has to be created first to register a cookie.

$cookie = new Panduan Ringkas CakePHP(name,value,expiration time,path,domain);

The name and value are mandatory and others are optional param.

Write Panduan Ringkas CakePHP

Following is the syntax to write a cookie.

$cookie = new Panduan Ringkas CakePHP(name,value,expiration time,path,domain);

The cookie created has to be added to cookieCollection as shown below −

$cookie = new Panduan Ringkas CakePHP('name','XYZ');
$cookies = new Panduan Ringkas CakePHPCollection([$cookie]);

If the cookie collection object is already created, the rest of the cookies can be added as shown below −

$cookies = $cookies->add($cookie);

Read Panduan Ringkas CakePHP

To read cookie make use of get() method from cookiecollection.

Syntax

The syntax for read cookie is as follows −

Cake\Http\Panduan Ringkas CakePHP\Panduan Ringkas CakePHPCollection::get($name)

This will return you cookiecollection Interface, to get the value of the cookie, you will have to call the method getValue().

Cake\Http\Panduan Ringkas CakePHP\Panduan Ringkas CakePHPCollection Interface::getValue()

Check Panduan Ringkas CakePHP

The has() method from cookieCollection will tell you, if the cookie is present or not.

Cake\Http\Panduan Ringkas CakePHP\Panduan Ringkas CakePHPCollection::has($name)

Example

echo $isPresent = $this->cookies->has('name');

Delete Panduan Ringkas CakePHP

The remove() method is used to delete cookie. Following is the syntax of the remove() method.

Cake\Http\Panduan Ringkas CakePHP\Panduan Ringkas CakePHPCollection::remove($name)

The remove() method will take one argument, the name of cookie variable ($name) to delete.

Example 1

$test = $this->cookies->remove('name');

Example 2

Make changes in the config/routes.php file as shown in the following program.

config/routes.php

<?php use Cake\Http\Middleware\CsrfProtectionMiddleware;
use Cake\Routing\Route\DashedRoute;
use Cake\Routing\RouteBuilder;
$routes->setRouteClass(DashedRoute::class);
$routes->scope('/', function (RouteBuilder $builder) {
   $builder->registerMiddleware('csrf', new CsrfProtectionMiddleware([
      'httpOnly' => true,
   ]));
   $builder->applyMiddleware('csrf');
   //$builder->connect('/pages',['controller'=>'Pages','action'=>'display', 'home']);
   $builder->connect('cookie/testcookies',['controller'=>'Panduan Ringkas CakePHPs','action'=>'testPanduan Ringkas CakePHPs']);
   $builder->fallbacks();
});

Create a Panduan Ringkas CakePHPsPanduan Ringkas CakePHP.php file at src/Panduan Ringkas CakePHP/Panduan Ringkas CakePHPsPanduan Ringkas CakePHP.php. Copy the following code in the controller file.

src/Panduan Ringkas CakePHP/Panduan Ringkas CakePHPs/Panduan Ringkas CakePHPsPanduan Ringkas CakePHP.php

<?php namespace App\Panduan Ringkas CakePHP;
   use App\Panduan Ringkas CakePHP\AppPanduan Ringkas CakePHP;
   use Cake\Http\Panduan Ringkas CakePHP\Panduan Ringkas CakePHP;
   use Cake\Http\Panduan Ringkas CakePHP\Panduan Ringkas CakePHPCollection;
   class Panduan Ringkas CakePHPsPanduan Ringkas CakePHP extends AppPanduan Ringkas CakePHP{
      public $cookies;
      public function testPanduan Ringkas CakePHPs() {
         $cookie = new Panduan Ringkas CakePHP('name','XYZ');
         $this->cookies = new Panduan Ringkas CakePHPCollection([$cookie]);
         $cookie_val = $this->cookies->get('name');
         $this->set('cookie_val',$cookie_val->getValue());
         $isPresent = $this->cookies->has('name');
         $this->set('isPresent',$isPresent);
         $this->set('count', $this->cookies->count());
         $test = $this->cookies->remove('name');
         $this->set('count_afterdelete', $test->count());
      }
   }
?>

Create a directory Panduan Ringkas CakePHPs at src/Template and under that directory create a View file called test_cookies.php. Copy the following code in that file.

src/Template/Panduan Ringkas CakePHP/test_cookies.php

The value of the cookie is: <?php echo $cookie_val; ?>

<br>
<?php if($isPresent):
?>
The cookie is present.
<?php else:
?>
The cookie isn't present.
<?php endif;
?>
<br>
<?php echo "The count of cookie before delete is :" .$count;
?>
<br>
<?php echo "The count of cookie after delete is :" .$count_afterdelete;
?>

Output

Execute the above example by visiting the following URL − http://localhost/cakephp4/cookie/testcookies

CakePHP - Security

Security is another important feature while building web applications. It assures the users of the website that, their data is secured. CakePHP provides some tools to secure your application.

Encryption and Decryption

Security library in CakePHP provides methods, by which we can encrypt and decrypt data. Following are the two methods, which are used for the same purpose.

static Cake\Utility\Security::encrypt($text, $key, $hmacSalt = null)
static Cake\Utility\Security::decrypt($cipher, $key, $hmacSalt = null)

The encrypt method will take text and key as the argument to encrypt data and the return value will be the encrypted value with HMAC checksum.

To hash a data, hash() method is used. Following is the syntax of the hash() method.

static Cake\Utility\Security::hash($string, $type = NULL, $salt = false)

CSRF

CSRF stands for Cross Site Request Forgery. By enabling the CSRF Component, you get protection against attacks. CSRF is a common vulnerability in web applications.

It allows an attacker to capture and replay a previous request, and sometimes submit data requests using image tags or resources on other domains. The CSRF can be enabled by simply adding the CsrfComponent to your components array as shown below −

public function initialize(): void {
   parent::initialize();
   $this->loadComponent('Csrf');
}

The CsrfComponent integrates seamlessly with FormHelper. Each time you create a form with FormHelper, it will insert a hidden field containing the CSRF token.

While this is not recommended, you may want to disable the CsrfComponent on certain requests. You can do so by using the controller’s event dispatcher, during the beforeFilter() method.

public function beforeFilter(Event $event) {
   $this->eventManager()->off($this->Csrf);
}

Security Component

Security Component applies tighter security to your application. It provides methods for various tasks like −

• Restricting which HTTP methods your application accepts − You should always verify the HTTP method, being used before executing side-effects. You should check the HTTP method or use Cake\Network\Request::allowMethod() to ensure the correct HTTP method is used.

• Form tampering protection − By default, the SecurityComponent prevents users from tampering with forms in specific ways. The SecurityComponent will prevent the following things −

  • Unknown fields cannot be added to the form.

  • Fields cannot be removed from the form.

  • Values in hidden inputs cannot be modified.

• Requiring that SSL be used − All actions to require a SSL- secured

• Limiting cross controller communication − We can restrict which controller can send request to this controller. We can also restrict which actions can send request to this controller’s action.

Example

Make changes in the config/routes.php file as shown in the following program.

config/routes.php

<?php use Cake\Http\Middleware\CsrfProtectionMiddleware;
use Cake\Routing\Route\DashedRoute;
use Cake\Routing\RouteBuilder;
$routes->setRouteClass(DashedRoute::class);
$routes->scope('/', function (RouteBuilder $builder) {
   $builder->registerMiddleware('csrf', new CsrfProtectionMiddleware([
      'httpOnly' => true,
   ]));
   $builder->applyMiddleware('csrf');
   //$builder->connect('/pages',
      ['controller'=>'Pages','action'=>'display', 'home']);
   $builder->connect('login',['controller'=>'Logins','action'=>'index']);
   $builder->fallbacks();
});

Create a LoginsPanduan Ringkas CakePHP.php file at src/Panduan Ringkas CakePHP/LoginsPanduan Ringkas CakePHP.php. Copy the following code in the controller file.

src/Panduan Ringkas CakePHP/LoginsPanduan Ringkas CakePHP.php

<?php namespace App\Panduan Ringkas CakePHP;
   use App\Panduan Ringkas CakePHP\AppPanduan Ringkas CakePHP;
   class LoginsPanduan Ringkas CakePHP extends AppPanduan Ringkas CakePHP {
      public function initialize() : void {
         parent::initialize();
         $this->loadComponent('Security');
      }
         public function index(){
      }
   }
?>

Create a directory Logins at src/Template and under that directory create a View file called index.php. Copy the following code in that file.

src/Template/Logins/index.php

<?php echo $this->Form->create(NULL,array('url'=>'/login'));
   echo $this->Form->control('username');
   echo $this->Form->control('password');
   echo $this->Form->button('Submit');
   echo $this->Form->end();
?>

Execute the above example by visiting the following URL − http://localhost/cakephp4/login

Output

Upon execution, you will receive the following output.

CakePHP - Validation

Often while making websites, we need to validate certain things before processing data further. CakePHP provides validation package, to build validators that can validate data with ease.

Validation Methods

CakePHP provides various validation methods in the Validation Class. Some of the most popular of them are listed below.

CakePHP - Creating Validators

Validator can be created by adding the following two lines in the controller.

use Cake\Validation\Validator;
$validator = new Validator();

Validating Data

Once, we have created validator, we can use the validator object to validate data. The following code explains, how we can validate data for login webpage.

$validator->notEmpty('username', 'We need username.')->add(
   'username', 'validFormat', ['rule' => 'email','message' => 'E-mail must be valid']);

$validator->notEmpty('password', 'We need password.');
$errors = $validator->errors($this->request->data());

Using the $validator object, we have first called the notEmpty() method, which will ensure that the username must not be empty. After that, we have chained the add() method to add one more validation for proper email format.

After that we have added validation for password field with notEmpty() method, which will confirm that password field must not be empty.

Example

Make Changes in the config/routes.php file as shown in the following program.

config/routes.php

<?php use Cake\Http\Middleware\CsrfProtectionMiddleware;
use Cake\Routing\Route\DashedRoute;
use Cake\Routing\RouteBuilder;
$routes->setRouteClass(DashedRoute::class);
$routes->scope('/', function (RouteBuilder $builder) {
   $builder->registerMiddleware('csrf', new CsrfProtectionMiddleware([
      'httpOnly' => true,
   ]));
   $builder->applyMiddleware('csrf');
   //$builder->connect('/pages',['controller'=>'Pages','action'=>'display', 'home']);
   $builder->connect('validation',['controller'=>'Valids','action'=>'index']);
   $builder->fallbacks();
});

Create a ValidsPanduan Ringkas CakePHP.php file at src/Panduan Ringkas CakePHP/ValidsPanduan Ringkas CakePHP.php. Copy the following code in the controller file.

src/Panduan Ringkas CakePHP/ValidsPanduan Ringkas CakePHP.php

<?php namespace App\Panduan Ringkas CakePHP;
   use App\Panduan Ringkas CakePHP\AppPanduan Ringkas CakePHP;
   use Cake\Validation\Validator;
   class ValidsPanduan Ringkas CakePHP extends AppPanduan Ringkas CakePHP{
      public function index(){
         $validator = new Validator();
         $validator->notEmpty('username', 'We need username.')->add(
            'username', 'validFormat', ['rule' => 'email','message' => 'E-mail must be valid']);
         $validator->notEmpty('password', 'We need password.');
         $errors = $validator->errors($this->request->getData());
         $this->set('errors',$errors);
      }
   }
?>

Create a directory Valids at src/Template and under that directory create a View file called index.php. Copy the following code in that file.

src/Template/Valids/index.php

<?php if($errors) {
      foreach($errors as $error)
      foreach($error as $msg)
      echo '<font color="red">'.$msg.'<br>';
   } else {
      echo "No errors.";
   }
   echo $this->Form->create(NULL,array('url'=>'/validation'));
   echo $this->Form->control('username');
   echo $this->Form->control('password');
   echo $this->Form->button('Submit');
   echo $this->Form->end();
?>

Execute the above example by visiting the following URL −

http://localhost/cakephp4/validation

Output

Click on the submit button without entering anything. You will receive the following output.

Http - Client

The http client can be used to make requests like GET, POST, PUT etc.

To work with http client, add the following −

use Cake\Http\Client;

Let us work on example to understand working of HTTP client.

HTTP GET Method

To get the data from give http url, you can do as follows −

$response = $http->get('https://jsonplaceholder.typicode.com/users');

In case, you need to pass some query params, they can be passed as follows −

$response = $http->get('https://jsonplaceholder.typicode.com/users', ["id", 1]);

To get the response, you can do as follows −

For normal text data −

$response->getBody();

For Json −

$response->getJson();

For Xml −

$response->getXml()

Example

Make Changes in the config/routes.php file as shown in the following program.

config/routes.php

<?php use Cake\Http\Middleware\CsrfProtectionMiddleware;
use Cake\Routing\Route\DashedRoute;
use Cake\Routing\RouteBuilder;
$routes->setRouteClass(DashedRoute::class);
$routes->scope('/', function (RouteBuilder $builder) {
   $builder->registerMiddleware('csrf', new CsrfProtectionMiddleware([
      'httpOnly' => true,
   ]));
   $builder->applyMiddleware('csrf');
   //$builder->connect('/pages',['controller'=>'Pages','action'=>'display', 'home']);
   $builder->connect('getData',['controller'=>'Requests','action'=>'index']);
   $builder->fallbacks();
});

Create a RequestsPanduan Ringkas CakePHP.php file at src/Panduan Ringkas CakePHP/RequestsPanduan Ringkas CakePHP.php. Copy the following code in the controller file.

src/Panduan Ringkas CakePHP/RequestsPanduan Ringkas CakePHP.php

<?php namespace App\Panduan Ringkas CakePHP;
   use App\Panduan Ringkas CakePHP\AppPanduan Ringkas CakePHP;
   use Cake\Http\Client;
   class RequestsPanduan Ringkas CakePHP extends AppPanduan Ringkas CakePHP{
      public function index(){
         $http = new Client();
         $response = $http->get('https://jsonplaceholder.typicode.com/users');
         $stream = $response->getJson();
         $this->set('response',$stream);
      }
   }
?>

Create a directory Requests at src/Template and under that directory create a View file called index.php. Copy the following code in that file.

src/Template/Requests/index.php

<h3>All Users from url : https://jsonplaceholder.typicode.com/users</h3>
<?php if($response) {
      foreach($response as $res => $val) {
         echo '<font color="gray">Panduan Ringkas CakePHP: '.$val["name"].' Email -'.$val["email"].'</font><br>';
      }
   }
?>

Execute the above example by visiting the following URL −

http://localhost/cakephp4/getData

Output

Click on the submit button without entering anything. You will receive the following output.

HTTP POST Method

To work with post, you need to call $http client as follows −

$response = $http->post('yoururl', data);

Let us see one example on the same.

Example

Make Changes in the config/routes.php file as shown in the following program.

config/routes.php

<?php use Cake\Http\Middleware\CsrfProtectionMiddleware;
use Cake\Routing\Route\DashedRoute;
use Cake\Routing\RouteBuilder;
$routes->setRouteClass(DashedRoute::class);
$routes->scope('/', function (RouteBuilder $builder) {
   $builder->registerMiddleware('csrf', new CsrfProtectionMiddleware([
      'httpOnly' => true,
   ]));
   $builder->applyMiddleware('csrf');
   //$builder->connect('/pages',['controller'=>'Pages','action'=>'display', 'home']);
   $builder->connect('postData',['controller'=>'Requests','action'=>'index']);
   $builder->fallbacks();
});

Create a RequestsPanduan Ringkas CakePHP.php file at src/Panduan Ringkas CakePHP/RequestsPanduan Ringkas CakePHP.php. Copy the following code in the controller file. Ignore if already created.

src/Panduan Ringkas CakePHP/RequestsPanduan Ringkas CakePHP.php

<?php namespace App\Panduan Ringkas CakePHP;
   use App\Panduan Ringkas CakePHP\AppPanduan Ringkas CakePHP;
   use Cake\Http\Client;
   class RequestsPanduan Ringkas CakePHP extends AppPanduan Ringkas CakePHP{
      public function index(){
         $http = new Client();
         $response = $http->post('https://postman-echo.com/post', [
            'name'=> 'ABC',
            'email' => 'xyz@gmail.com'
         ]);
      }
   }
?>

Create a directory Requests at src/Template and under that directory create a View file called index.php. Copy the following code in that file.

src/Template/Requests/index.php

<h3>Testing Post Method</h3>

Execute the above example by visiting the following URL −

http://localhost/cakephp4/postData

Output

Given below is the output of the code −

Similarly, you can try for PUT method.

$http = new Client();
$response = $http->put('https://postman-echo.com/post', [
   'name'=> 'ABC',
   'email' => 'xyz@gmail.com'
]);

CakePHP - Pagination

If we want to show a set of data that is huge, we can use pagination and this feature is available with cake php 4 which is very easy to use.

We have a table titled “articles” with following data −

Let us use pagination to display the data in the form of pages, instead of showing them all together.

Example

Make Changes in the config/routes.php file as shown in the following program.

config/routes.php

<?php use Cake\Http\Middleware\CsrfProtectionMiddleware;
use Cake\Routing\Route\DashedRoute;
use Cake\Routing\RouteBuilder;
$routes->setRouteClass(DashedRoute::class);
$routes->scope('/', function (RouteBuilder $builder) {
   $builder->registerMiddleware('csrf', new CsrfProtectionMiddleware([
      'httpOnly' => true,
   ]));
   $builder->applyMiddleware('csrf');
   //$builder->connect('/pages',['controller'=>'Pages','action'=>'display', 'home']);
   $builder->connect('posts',['controller'=>'Posts','action'=>'index']);
   $builder->fallbacks();
});

Create a PostsPanduan Ringkas CakePHP.php file at src/Panduan Ringkas CakePHP/PostsPanduan Ringkas CakePHP.php. Copy the following code in the controller file. Ignore, if already created.

src/Panduan Ringkas CakePHP/PostsPanduan Ringkas CakePHP.php

<?php namespace App\Panduan Ringkas CakePHP;
   use App\Panduan Ringkas CakePHP\AppPanduan Ringkas CakePHP;
   class PostsPanduan Ringkas CakePHP extends AppPanduan Ringkas CakePHP {
      public function index(){
         $this->loadModel('articles');
         $articles = $this->articles->find('all')->order(['articles.id ASC']);
         $this->set('articles', $this->paginate($articles, ['limit'=> '3']));
      }
   }
?>

The data from articles table is fetched using −

$this->loadModel('articles');
$articles = $this->articles->find('all')->order(['articles.id ASC']);

To apply pagination and we would show the data with 3 per records and the same is done as follows −

$this->set('articles', $this->paginate($articles, ['limit'=> '3']));

This is enough to activate pagination on the articles tables.

Create a directory Posts at src/Template and under that directory create a Viewfile called index.php. Copy the following code in that file.

src/Template/Posts/index.php

<div>
<?php foreach ($articles as $key=>$article) {?>
<a href="#">
   <div>
   <p>= $article->title ?> </p>
   <p>= $article->details ?></p>
   </div>
</a>
<br>
<?php }
?>
<ul class="pagination">
= $this->Paginator->prev("
= $this->Paginator->numbers() ?>
= $this->Paginator->next(">>") ?>
</ul>
</div>

The pagination for the list of pages is done as follows −

= $this->Paginator->prev(" = $this->Paginator->numbers() ?> = $this->Paginator->next(">>") ?>

Execute the above example by visiting the following URL −

http://localhost/cakephp4/posts

Output

When you run the code, you will see the following output −

Click on the numbers below, to switch to next page, or use the next or previous button.

For example

You will see that page=2 is appended to the page url in the browser.

CakePHP - Date and Time

To work with date and time in cakephp4, we are going to make use of the available FrozenTime class.

To work with date and time, include the class in your controller

use Cake\I18n\FrozenTime;

Let us work, on an example and display date and time, using FrozenTime class.

Example

Make Changes in the config/routes.php file as shown in the following program.

config/routes.php

<?php use Cake\Http\Middleware\CsrfProtectionMiddleware;
use Cake\Routing\Route\DashedRoute;
use Cake\Routing\RouteBuilder;
$routes->setRouteClass(DashedRoute::class);
$routes->scope('/', function (RouteBuilder $builder) {
   $builder->registerMiddleware('csrf', new CsrfProtectionMiddleware([
      'httpOnly' => true,
   ]));
   $builder->applyMiddleware('csrf');
   //$builder->connect('/pages',['controller'=>'Pages','action'=>'display', 'home']);
   $builder->connect('datetime',['controller'=>'Dates','action'=>'index']);
   $builder->fallbacks();
});

Create a DatesPanduan Ringkas CakePHP.php file at src/Panduan Ringkas CakePHP/DatesPanduan Ringkas CakePHP.php. Copy the following code in the controller file. Ignore if already created.

src/Panduan Ringkas CakePHP/DatesPanduan Ringkas CakePHP.php

<?php namespace App\Panduan Ringkas CakePHP;
   use App\Panduan Ringkas CakePHP\AppPanduan Ringkas CakePHP;
   use Cake\I18n\FrozenTime;
   class DatesPanduan Ringkas CakePHP extends AppPanduan Ringkas CakePHP{
      public function index(){
         $time = FrozenTime::now();
         $now = FrozenTime::parse('now');
         $_now = $now->i18nFormat('yyyy-MM-dd HH:mm:ss');
         $this->set('timenow', $_now);
         $now = FrozenTime::parse('now');
         $nice = $now->nice();
         $this->set('nicetime', $nice);
         $hebrewdate = $now->i18nFormat(\IntlDateFormatter::FULL, null, 'en-IR@calendar=hebrew');
         $this->set("hebrewdate",$hebrewdate);
         $japanesedate = $now->i18nFormat(\IntlDateFormatter::FULL, null, 'en-IR@calendar=japanese');
         $this->set("japanesedate",$japanesedate);
         $time = FrozenTime::now();
         $this->set("current_year",$time->year);
         $this->set("current_month",$time->month);
         $this->set("current_day",$time->day);
      }
   }
?>

Create a directory Dates at src/Template and under that directory create a View file called index.php. Copy the following code in that file.

src/Template/Dates/index.php

<?php echo "The Current date and time is = ".$timenow;
   echo "<br/>";
   echo "Using nice format available = ".$nicetime;
   echo "<br>";
   echo "Date and Time as per Hebrew Calender =" .$hebrewdate;
   echo "<br>";
   echo "Date and Time as per Japanese Calender =" .$japanesedate;
   echo "<br>";
   echo "Current Year = ".$current_year;
   echo "<br>";
   echo "Current Month = ".$current_month;
   echo "<br>";
   echo "Current Day = ".$current_day;
?>

Execute the above example by visiting the following URL −

http://localhost/cakephp4/datetime

Output

When you run the code, you will see the following output −

CakePHP - File upload

To work on file upload we are going to use the form helper. Here, is an example for file upload.

Example

Make Changes in the config/routes.php file, as shown in the following program.

config/routes.php

<?php use Cake\Http\Middleware\CsrfProtectionMiddleware;
use Cake\Routing\Route\DashedRoute;
use Cake\Routing\RouteBuilder;
$routes->setRouteClass(DashedRoute::class);
$routes->scope('/', function (RouteBuilder $builder) {
   $builder->registerMiddleware('csrf', new CsrfProtectionMiddleware([
      'httpOnly' => true,
   ]));
   $builder->applyMiddleware('csrf');
   //$builder->connect('/pages',['controller'=>'Pages','action'=>'display', 'home']);
   $builder->connect('fileupload',['controller'=>'Files','action'=>'index']);
   $builder->fallbacks();
});

Create a FilesPanduan Ringkas CakePHP.php file at src/Panduan Ringkas CakePHP/FilesPanduan Ringkas CakePHP.php. Copy the following code in the controller file. Ignore, if already created.

Create uploads/ directory in src/. The files uploaded will be saved in uploads/ folder.

src/Panduan Ringkas CakePHP/FilesPanduan Ringkas CakePHP.php

<?php namespace App\Panduan Ringkas CakePHP;
   use App\Panduan Ringkas CakePHP\AppPanduan Ringkas CakePHP;
   use Cake\View\Helper\FormHelper;
   class FilesPanduan Ringkas CakePHP extends AppPanduan Ringkas CakePHP {
      public function index(){
         if ($this->request->is('post')) {
            $fileobject = $this->request->getData('submittedfile');
            $uploadPath = '../uploads/';
            $destination = $uploadPath.$fileobject->getClientFilename();
            // Existing files with the same name will be replaced.
            $fileobject->moveTo($destination);
         }
      }
   }
?>

Create a directory Files at src/Template and under that directory create a View file called index.php. Copy the following code in that file.

src/Template/Files/index.php

<?php echo $this->Form->create(NULL, ['type' => 'file']);
   echo $this-&gtl;Form->file('submittedfile');
   echo $this->Form->button('Submit');
   echo $this->Form->end();
   $uploadPath ='../uploads/';
   $files = scandir($uploadPath, 0);
   echo "Files uploaded in uploads/ are:<br>";
   for($i = 2; $i ";
?>

The files saved in uploads/ folder is listed for the user. Execute the above example by visiting the following URL −

http://localhost/cakephp4/fileupload −

Output

When you execute the above code, you should see the following output −