search
Homeweb3.0A simple guide to converting USDT ERC20 to TRC20

We teach you step by step how to convert USDT ERC20 to TRC20 network. This is because many people like to move the USDT stablecoin from the Ethereum network to the Tron network to save on transaction fees.

So, if you want to convert your ERC-20 tokens to TRC-20, I believe this tutorial will be helpful to you.

如何将USDT ERC20转换为TRC20?快速上手指南

The difference between ERC-20 and TRC-20

ERC-20 tokens and TRC-20 tokens represent the Ethereum network and the Tron network respectively of tokens. There are some differences between the two networks, mainly in the following aspects: First, the Ethereum network often faces congestion and high gas fees, which may lead to transaction delays and high transaction costs. In comparison, the Tron network is relatively less congested, has faster transaction speeds, and has lower transaction fees. Secondly, the Ethereum network has a larger number of users and a wider range of application scenarios, while the Tron network is relatively small. These differences make the choice of using ERC-20 tokens or TRC-20 tokens dependent on specific needs and usage. As a result, the Tron network is faster and has relatively low fees, sometimes even less than $1 to $10, while Ethereum fees range from $3 to $150, possibly higher in extreme cases.

How to exchange USDT from ERC20 to TRC20?

First, you need to prepare a crypto wallet, such as Metamask. Next, prepare a cryptocurrency exchange account that can receive TRC-20 tokens and ERC-20 tokens, as well as some ERC-20 network tokens, such as USDT.

Please note: Normally, Metamask wallet will only display ERC20 network tokens by default. If you need to receive tokens from other networks (such as TRC20), you need to configure the corresponding network in Metamask in advance.

After registering on OKX and completing account settings, you need to enter the recharge interface. In the deposit interface, search and select USDT, then select ERC20 as the deposit method. After completing these steps, you will receive an exclusive ERC20 deposit wallet address. Next, you only need to deposit your USDT in the ERC20 network to the wallet address. After completing the recharge, you can view your USDT assets in your OKX account.

It should be emphasized that OKX not only supports recharge from decentralized wallets such as Metamask, but also supports recharge from other trading platforms. For example, if you withdraw a cryptocurrency supported by OKX on Binance or other platforms and fill in the correct deposit address in your OKX account, OKX will deposit the corresponding funds into your account as long as the other platforms and networks confirm it successfully. . When doing this, always make sure your wallet address is accurate.

2. Since your purpose is to convert your USDT ERC-20 to TRC-20, at this time you can enter the personal center-select withdrawal-search USDT-select TRC20-enter the number you use to receive TRC20 Wallet address - Enter the amount and confirm to complete the withdrawal. After waiting for network confirmation, you will receive the USDT of the TRC20 network in your wallet.

Conclusion

For every transaction on the blockchain, it is always a good practice to carefully check every relevant detail. Especially when sending large amounts of money, be sure to send a small test transaction first to ensure you are sending to the correct address. All transactions are irreversible and if you send them to the wrong address, your coins are lost forever. We hope this article on how to convert USDT ERC20 to TRC20 was helpful to you.

The above is the detailed content of A simple guide to converting USDT ERC20 to TRC20. For more information, please follow other related articles on the PHP Chinese website!

Statement
This article is reproduced at:脚本之家. If there is any infringement, please contact admin@php.cn delete
Binance Exchange Official Website_Binance Official Website Security PortalBinance Exchange Official Website_Binance Official Website Security PortalJul 18, 2025 am 06:09 AM

Binance is the world's leading digital asset trading platform, providing a variety of services and supporting multilingual and fiat currency recharges; if the official website access is restricted, you can use official acceleration services or mirroring sites; verify the security of the official website, you must confirm that the URL starts with https, avoid suspicious links, and enter through recommended links or search engine advertising logos; to deal with restricted access, you can use Binance's official APP, acceleration solutions in the official announcement, and follow official social media to obtain entrance updates; at the same time, users are reminded not to disclose account information, and must enable two-step verification and other security measures.

How to view the depth of Bi'an trading and handicap_Bi'an handicap practical guideHow to view the depth of Bi'an trading and handicap_Bi'an handicap practical guideJul 18, 2025 am 06:06 AM

Binance trading depth and trading ports can be viewed and analyzed through the following steps: 1. Log in to the Binance official website and enter the spot trading page; 2. Select any trading pair such as BTC/USDT; 3. View the trading order information on the right side of the trading interface, and click on the "Depth Chart" at the top to switch the graphic view. The market displays that the buyer and seller place orders in real time, buying one is the highest-priced buy order, and selling one is the lowest-priced sell order. The depth of the transaction reflects the intensity of buying and selling within a specific price range. The green area represents the accumulated volume of buyers, the red area represents the accumulated volume of sellers, and the steep curve indicates the dense orders, and the smooth ones make the liquidity weak. Practical techniques include observing changes in the market, capturing short-term opportunities, tracking large orders to identify the main intentions, and paying attention to the risks of false orders. Mastering these can help judge market trends

Bian recharge and withdrawal process and time descriptionBian recharge and withdrawal process and time descriptionJul 18, 2025 am 06:03 AM

Log in to the Binance account; 2. Enter the recharge interface to select currency and chain; 3. Copy the address to complete the transfer; 4. Wait for the block network to confirm the account. The recharge time is usually 5 minutes to 1 hour. When choosing a chain, it is recommended to give priority to TRC20 or BEP20 with low handling fees. Be sure to confirm the address, currency and chain name before operation to avoid capital loss.

How to trade stablecoins_A full flow diagram for beginners buying and sellingHow to trade stablecoins_A full flow diagram for beginners buying and sellingJul 18, 2025 am 06:00 AM

The stablecoin trading process includes the steps of registering an exchange, completing certification, buying or selling. First, choose a trusted exchange such as Binance, OKX, etc., and then complete KYC identity authentication, and then buy stablecoins through fiat currency recharge or OTC transactions. You can also transfer the stablecoins to the fund account and sell them through P2P transactions and withdraw them to the bank card or Alipay. When operating, you need to pay attention to choosing a regulated platform, confirm transaction security and handling fees.

What to do if Dogecoin transfer is slow_Analysis of handling fees and congestionWhat to do if Dogecoin transfer is slow_Analysis of handling fees and congestionJul 17, 2025 pm 11:57 PM

Slow transfer of Dogecoin can be solved by increasing the handling fee and avoiding peak hours. The main reasons include network congestion, too low handling fees and block capacity limitations; the recommended handling fees are adjusted between 1-10 DOGE/KB according to the network status; the methods to increase the speed are to increase the handling fees, avoid peaks, use light wallets, and query the status on the chain; the steps to set the handling fees are taken by Trust Wallet as an example, including entering the sending interface, clicking advanced settings, and setting the fees reasonably; Exchange transfers need to avoid maintenance periods and pay attention to the minimum amount and handling fees to ensure efficient confirmation and asset security.

How to trade Bitcoin_Analysis of coins, contracts, and leverage operationsHow to trade Bitcoin_Analysis of coins, contracts, and leverage operationsJul 17, 2025 pm 11:54 PM

Bitcoin trading mainly includes three methods: currency trading, contract trading and leverage trading. Coin trading is to exchange one kind of digital currency for another, with no leverage and no risk of liquidation, which is suitable for beginners. The operation process includes registering an exchange account, completing KYC certification and recharge, and selecting trading pairs to set orders; contract trading allows prediction of price rise and fall, and can be long and short, which is divided into perpetual contracts and delivery contracts. The operation process includes entering the contract sector, setting leverage, selecting directions, and setting stop-profit and stop losses, but it is necessary to note that price fluctuations under high leverage are prone to trigger explosive positions and strictly control the risk; leverage trading is to enlarge positions by borrowing funds, which is suitable for short-term arbitrage workers. The operation steps include opening trading pairs, transferring assets to borrow coins, returning and closing interest after buying and selling. The three methods have their own characteristics, suitable for beginners

How to check real-time price of Dogecoin_The best market query website recommendationHow to check real-time price of Dogecoin_The best market query website recommendationJul 17, 2025 pm 11:51 PM

The real-time price of Dogecoin can be checked through five major platforms. 1. Binance supports trading and trading quota depth; 2. OKX provides Chinese interface and APP for convenient operation; 3. CoinGecko data is fully suitable for beginners; 4. CoinMarketCap aggregates global market conditions and supports price reminders; 5. TradingView is suitable for technical analysts. It is recommended that novices pay attention to the spot market and judge the market situation based on trading volume and in-depth. Advanced users can use professional tools to improve decision-making accuracy.

Soaring altcoin WXY trading volume and coin holding address change trendSoaring altcoin WXY trading volume and coin holding address change trendJul 17, 2025 pm 11:48 PM

Whether WXY coin's recent surge continues can be judged by the following three points: 1. Changes in trading volume show the activity of funds, and continuous amplification indicates the rise in popularity, but we need to be wary of the risk of divergence between volume and price; 2. The increase in the number of coin addresses reflects the entry of new users, and the divergence of holding positions is conducive to stable rise, while whales need to be wary of controlling the market; 3. Combining on-chain data and trading volume analysis tools, such as Dexscreener, CoinMarketCap, DeBank, etc., help judge market trends and risks, thereby avoiding blindly chasing highs.

Hot AI Tools

Undress AI Tool

Undress AI Tool

Undress images for free

Undresser.AI Undress

Undresser.AI Undress

AI-powered app for creating realistic nude photos

AI Clothes Remover

AI Clothes Remover

Online AI tool for removing clothes from photos.

Clothoff.io

Clothoff.io

AI clothes remover

Video Face Swap

Video Face Swap

Swap faces in any video effortlessly with our completely free AI face swap tool!

Hot Tools

SublimeText3 Linux new version

SublimeText3 Linux new version

SublimeText3 Linux latest version

SAP NetWeaver Server Adapter for Eclipse

SAP NetWeaver Server Adapter for Eclipse

Integrate Eclipse with SAP NetWeaver application server.

ZendStudio 13.5.1 Mac

ZendStudio 13.5.1 Mac

Powerful PHP integrated development environment

WebStorm Mac version

WebStorm Mac version

Useful JavaScript development tools

SecLists

SecLists

SecLists is the ultimate security tester's companion. It is a collection of various types of lists that are frequently used during security assessments, all in one place. SecLists helps make security testing more efficient and productive by conveniently providing all the lists a security tester might need. List types include usernames, passwords, URLs, fuzzing payloads, sensitive data patterns, web shells, and more. The tester can simply pull this repository onto a new test machine and he will have access to every type of list he needs.