Home>Article>Computer Tutorials> How to change the hard disk mode to IDE compatibility mode on a Meijie motherboard?
Meijie motherboard modification BIOS to change the hard disk mode to IDE compatibility mode:
1. Click the "Start" button, type "regedit" in the search box, and press the Enter key. Open the "Registry Editor" window. Although Windows 7 does not display the "Run" command in the "Start" menu by default, you can actually use the search box to replace this function (or directly press the Windows key R key and then enter).
2. Locate the HKEY_LOCAL_MACHINEervicessahci branch in the title bar on the left side of the "Registry Editor" window, and then double-click "Start" in the right window.
3. In the open "Edit DWORD Value" dialog box, change the value in the "Value Data" box from 3 to the number 0, and click the "OK" button.
4. Close the "Registry Editor" window and restart the computer.
5. When restarting the computer, enter the BIOS setup interface and change the hard disk to AHCI mode. For example, for my computer, press the F1 key to enter the BIOS when starting the computer, and select "Devices→ATADrivesSetup→ConfigureSATAas→ide" in sequence. , and finally press the F10 key to save and exit the BIOS.
Meijie BIOS (basically the motherboards of this model are similar) The prerequisite for setting the optical drive to start is to have an optical drive or U disk optical drive mode.
Press DEL when booting to enter the BIOS, select the second one: Advanced bios Features to enter,
Then select the second one: Boot Device priority, enter use-or up and down Wait for the key and set the CD-ROM to the front (if you use a U disk CD-ROM, the U disk logo will be displayed).
The third Hard Disk Drives is to select the hard disk or U disk HDD mode to start. .
1. Adjust the BIOS settings 2. After replacing the battery, the BIOS settings may be reset and need to be readjusted. Yes Enter the BIOS interface and make settings according to your own needs, such as adjusting the startup sequence, modifying the system time, etc. 3. In addition, you can also make more settings according to specific needs, such as adjusting the CPU frequency, memory frequency, etc., to optimize the computer's performance. performance and stability. At the same time, you can also set other hardware devices as needed, such as USB interfaces, sound cards, etc. 4. If you are not familiar with BIOS settings, it is recommended to consult relevant information or consult professionals to ensure that BIOS settings are adjusted correctly , to avoid problems.
"How to set the UEFI startup mode for Meijie motherboard? "The steps to set the UEFI boot mode for the Meijie motherboard are as follows: 1. First, enter the BIOS setup interface of the computer. Usually, you can enter the BIOS setup interface by pressing or holding down the Del key, F2 key, F10 key, etc. when turning on the computer. 2 . In the BIOS setting interface, find the startup option or boot option and select Enter. 3. In the startup option, find the startup mode or boot mode setting and set it to UEFI mode. 4. According to different Meijie motherboard models and versions , some additional settings or adjustments may be required depending on the system type (such as Windows or Linux). 5. After the settings are completed, save and exit the BIOS setting interface, restart the computer to take effect. Through the above steps, you can set the UEFI of the Meijie motherboard Boot mode. UEFI boot mode provides faster boot speed and a safer and more reliable system boot method. For operating systems and hardware that support UEFI, it is recommended to use UEFI boot mode. If your Meijie motherboard does not support UEFI boot or you need To use a specific Legacy BIOS boot mode, you can refer to the Meijie motherboard user manual or consult Meijie official technical support for more detailed guidance.
Answer: The steps to set up the bios for Meijie motherboard-installed system are as follows: 1. First, turn on the computer and press the DEL key to enter the bios settings.
2. Select Advanced BIOS Features
3. Select Boot Devlce Priority and change 1st Set Boot Device to the CD-ROM drive, then save and exit.
First, turn on the computer and press the "Del" key to enter the motherboard when the motherboard logo is displayed. bios interface. After entering, there is an English inside. You can change the bios language here, and then switch to Chinese.
Then boot without entering the system, skipping a lot of words is to achieve diskless boot. Generally, home computers An error will be displayed. Go to the diskless settings in the advanced menu. Then turn off the pxe function. If you cannot access the Internet, the network cable plug behind the motherboard will not light up. In that case, you need to set up the onboard network card control. Set it to the on state.
Finally, if you are using a mechanical hard drive and are stuck on the Windows startup interface after starting the system, please set the following item. Do not set the SATA mode to AHCI. It is set to native, which should also be the default mode. But if it is a solid-state drive, it must be set to AHCI, but this mode must be used after installing the driver.
The onboard graphics card setting in Meijie motherboard BIOS can be turned off. This feature can be found in the BIOS settings and disables the integrated graphics by switching the boot order to set the integrated graphics as the last device to boot. It should be noted that this method may affect the stability and compatibility of the system, so long-term use is not recommended.
1. First, insert the U disk that has been made with the U boot software into the USB interface of the computer host (it is recommended to insert it into the USB interface at the back of the host box, so that the U disk can be better recognized) , and then turn on the computer.
When the startup screen appears, press the ESC or F12 key continuously to enter the BIOS setup main interface menu.
Enter the BIOS main menu and find and select "Hard Disk Boot"
(Some may display "Advanced BIOS Features", just select one of these two) and then press the Enter key:
The above is the detailed content of How to change the hard disk mode to IDE compatibility mode on a Meijie motherboard?. For more information, please follow other related articles on the PHP Chinese website!