Home > Article > Computer Tutorials > Is there any flash software that can solve the problem of Redmi phone not being able to turn on?
You can try card flashing: use a memory card (SD, TF, etc.) to flash the phone,
Card swiping process:
1. First, you need to download a card swiping package corresponding to your model. You can download this flash package from the official website, ROM Home or ROM Base.
2. Place the downloaded flash package directly in the root directory of the SD card (for some devices that do not support external memory cards, you can copy the flash package to the built-in memory card, the operation principle is the same).
3. Shut down the phone, remove the SIM card, and install the memory card. It is recommended to back up important things in the memory card.
4. When shutting down, press the power button and the volume up button at the same time for about ten seconds, and then let go.
5, enter recovery mode or REC mode.
6, select wipe cache partition to clear the cache.
7. After clearing the cache, select "Wipe Data/Factory Reset" to restore factory settings.
8. First select "install zip from sdcard", press the power button to confirm, then select "apply sdcard:update", press the power button again to confirm. This step is to select the flash package from the memory card for flashing. Please wait patiently for the flashing process to complete.
It may be that the phone has insufficient power. It is recommended to connect the phone to the charger and charge it for a period of time before turning it on. If it still cannot be turned on, you can try to force restart the phone by pressing and holding the power button for more than 10 seconds.
If your phone becomes bricked, you can try to install HiSuite on your computer to restore the system. If your phone cannot be turned on normally or needs a system upgrade, you can use HiSuite software. Connect your phone to the computer, select PC Assistant mode, and follow the prompts on the computer to install HiSuite. Next, you can follow the steps below for one-click recovery:
1: After installing the mobile assistant, open it on the computer
Two: Use a USB cable to connect your phone to the computer, then press and hold the volume down button and the power button at the same time (for more than 10 seconds) until you enter fastboot mode, at which time you will see an English robot interface.
3: Click "One-click Repair" on HiSuite -> "Continue" -> "Start"
4: HiSuite will download the appropriate version from the official website, and the download time is related to the network speed. If the version is larger, the download may take longer, usually 1-2 hours, so please be patient.
5: After downloading, the phone will automatically restart and enter the upgrade interface. Remember not to touch the phone and data cable
6: After the upgrade is completed, HiSuite will prompt success!
Seven: The phone automatically restarts to complete the repair
The above is the detailed content of Is there any flash software that can solve the problem of Redmi phone not being able to turn on?. For more information, please follow other related articles on the PHP Chinese website!