How to map a network drive to resolve shared printer access denied issue?

Please provide detailed instructions on how to solve the problem of shared printer access being denied by mapping network drives

1: It is best to set all computers to the same workgroup. The specific operation is as follows: right-click My Computer, select Properties (Advanced Properties), find the computer name, click Workgroup, click Change, and change the workgroup to the same one. This ensures that the computers are communicating on the same network.

2: Connect to the printer host and set it up

1:

The operating steps under Windows 8 system are as follows: 1. First, click on the Start menu to enter the Control Panel. 2. In the control panel, find the "Network and Internet" option and click to enter. 3. In the next menu, select "Network and Sharing Center". 4. On the Network and Sharing Center page, click "Change advanced sharing settings" on the left. 5. In the advanced sharing settings page, find "Current Profile" and click to expand it. 6. Under the current configuration file, find "Enable network discovery" and check this option. 7. Finally, click "OK" to save the settings and exit. After completing the above operations, the

of the file and printer

The following settings are the same as XP

b:win7: First, open network discovery and enter the Network Sharing Center. In Home Network & Sharing Settings, select the sharing option. Check Enable network discovery and make sure to check the File and Printer Sharing option before exiting.

The following settings are the same as xp

xp settings

2. Open the control panel, find the "User Account" option, and click to enter. 3. On the "User Account" page, click "Manage Account". 4. On the "Manage Accounts" page, existing accounts will be listed. Find the "GUEST" user and click Select. 5. In the settings page of the "GUEST" user, click "Enable this account". 6. Do not set a password, click "OK" directly to save the settings. Please note that these operations may vary depending on your operating system version and PC settings. If you can't find a specific option or setting, see

3: Click "WIN R" on the keyboard, then enter gpedit.msc, and make sure the Local Group Policy Editor is opened.

a: Open Computer Configuration, you can search for "Computer Configuration" in the Start menu. Then click "Windows Settings", find "Security Settings", and then select "Local Policies". In the editing area on the right, find "Deny local login" and double-click it to enter the editing state. After deleting the GUEST account, click Confirm to exit. Next, find "Deny access to this computer from the network" and double-click it to enter the editing state and delete the GUEST account. Finally, confirm to exit the configuration interface.

b: Click the "Security Options" button on the left, find the "Network Access: Sharing and Security Mode for Local Accounts" option in the editing area on the right, and double-click to open the settings window. Set this option to "Guest only - Local users authenticate in guest mode".

c: Click "Security Options" on the left and find the "Account" option. Here you can choose to only allow local accounts with blank passwords to log in to the console, and set this to disabled.

4: If the printer host and client operating systems are different, it is recommended to install a local printer on the client first, set the port to LPT1, and restart the computer. In this way, the client computer can directly access the host computer where the network printer is installed. Just click on the printer option and the system will automatically install the network printer driver.

What is the reason why the error code is not mapped

Solution 1:

Can you access the share of the computer you want to map? Follow-up If you are prompted for access permissions, check to see if the folder you want to map has read and write permissions for guest or everyone, or your computer name.

A: Can you access the share of the computer you want to map?

Answer: To view all activated machines in the LAN, just enter net view under DOS, and all connected machine names will be listed. There are many ways to enter DOS: 1. Press the Windows logo key on the keyboard, then press the R key, enter CMD in the pop-up run window and press Enter to run DOS. 2. Click the "Start" menu, select "Run", enter CMD in the pop-up run window and press Enter. 3. Directly find the DOS command line program and open it. Through these methods, you can use the net view command under DOS to view the names of machines that have been activated in the LAN.

Answer: Common DOS commands can be used to establish a connection to a remote host. For example, you can use the following command: net use \\ip\ipc$ "password" /user:"username". This command can help us establish a connection with the remote host. You can also use the command net user username password /add to create a new user, and use the net user command to change the user password. These commands can help us perform remote operations and user management in a DOS environment.

Answer: The reasons for ipc$ connection failure usually include the following common reasons: 1) Your system is not NT or above operating system; 2) The other party does not open ipc$ default sharing; 3) The other party has not opened port 139 or 445 (may be blocked by the firewall); 4) Your command input is incorrect (such as missing spaces, etc.); 5) The username or password is incorrect (if it is an empty connection, there is no need to enter the username and password). In addition, you can also try the following methods to solve the problem of ipc$ connection failure: - Confirm that the other party's network connection is normal and there are no other network failures; - Confirm that your network settings are correct, including IP address, subnet mask, etc.; - Confirm that your username and password are entered correctly; - Try to use other methods to connect, such as using the Remote Desktop Connection tool provided by Microsoft. Hope the above method

Answer: You are talking about the English input in the run. The following are various commands: net use \\ip\ipc$ ＂ ＂ ＂ /user: ＂ ＂ Establish an IPC empty link net use \\ip\ipc$ ＂ password ＂/user：＂Username...

Computer commands

Answer: To enter the registry, use regedit net use \\ip\ipc$ ＂ ” /user：＂ ” to establish an IPC empty link net use \\ip\ipc$ ＂password＂ /user：＂username＂ to establish an IPC Non-empty link net...

Answer: The steps are as follows: 1. Click Start, click Run; 2. Enter cmd, click OK; 3. After the prompt, enter net use \\target host ip address\shared resource name mapping drive letter target host password /user: Target host username, just press Enter. For example: net use \\172.16.50.13\user x: 123456 /user:admi...

Answer: Wrong type? Does that mean the printer is used as a directory or vice versa? You can use net view \\server to see if the name is correct

Answer: 1. Problem description: When connecting to VSS, you need to use the ipc connection. After disconnecting, use the command net use \\10.11.

again.

The above is the detailed content of How to map a network drive to resolve shared printer access denied issue?. For more information, please follow other related articles on the PHP Chinese website!