lsp repair method: 1. Reinstall the TCP/IP protocol; 2. Use the LSP repair tool; 3. Use system commands to reset the Winsock directory database; detailed introduction: 1. Reinstall the TCP/IP protocol, LSP problems are sometimes caused by problems with the TCP/IP protocol. In this case, you can repair the LSP by reinstalling the TCP/IP protocol. 2. Use the LSP repair tool. The LSP repair tool is a tool specially used to repair LSP problems. Tools, use LSP repair tool quickly and efficiently, etc.
There are many ways to repair LSP. The following are several common repair methods:
1. Reinstall the TCP/IP protocol
LSP problems are sometimes caused by problems with the TCP/IP protocol. At this time, the LSP can be repaired by reinstalling the TCP/IP protocol. In Windows systems, you can follow the steps below:
1.1 Open "Control Panel" and select "Network and Sharing Center".
1.2 Click "Ethernet" or the network connection you are using to enter the network settings interface.
1.3 Click "Properties", select TCP/IPv4 protocol, and click "Properties".
1.4 Click the "Install" button, select "Protocol", and click "Add".
1.5 In the pop-up window, select "Install from Disk", click "Browse", find the installation file of the TCP/IP protocol, and click "Open".
1.6 Click "OK", reinstall the TCP/IP protocol, and then restart the computer.
2. Use the LSP repair tool
The LSP repair tool is a tool specially used to repair LSP problems. Use the LSP repair tool to fix LSP issues quickly and efficiently. The following are the steps to use the LSP repair tool:
2.1 Download and install the LSP repair tool. You can search for LSP repair tools on the Internet and download and install them.
2.2 Open the LSP repair tool and select the "Repair LSP" option.
2.3 Click the "Repair Now" button and wait for the repair to be completed.
2.4 Just restart the computer.
3. Use system commands to reset the Winsock directory database
In addition to using the LSP repair tool, you can also use system commands to reset the Winsock directory database to repair LSP problems. The following are the steps to use system commands to reset the Winsock directory database:
3.1 Open the "Run" dialog box, enter "cmd", and press the Enter key to open the command prompt window.
3.2 Enter the following command in the command prompt window: netsh winsock reset, and then press the Enter key.
3.3 Wait for a moment, and then restart the computer after the prompt appears.
It should be noted that using system commands to reset the Winsock directory database will clear all network connection configurations and DNS cache information, so you need to back up relevant data or perform other necessary operations before performing this operation.
The above are several common LSP repair methods. You can choose the method that suits you according to the specific situation. If none of the above methods can solve the problem, it is recommended to seek help from professional technical support or maintenance personnel.
The above is the detailed content of lsp repair. For more information, please follow other related articles on the PHP Chinese website!