When configuring the router in Win7 system, sometimes the 192.168.1.1 login page cannot be opened. Why can't the 192.168.1.1 page in Win7 system be opened? what is the reason? The WEB server of the router itself is faulty. Communication cannot be established between the Windows 7 computer and the router, resulting in the 192.168.1.1.1 login page not opening.
Win7 system 192.168.1.1 page cannot be opened. What’s going on:
1. The network cable connecting the router and Windows 7 computer is not inserted correctly.
2. Router DHCP server and other issues.
3. There is a problem with the local connection configuration in the Windows 7 computer.
So, you must first determine whether it is a WEB failure of the router or a network communication problem. If it is a network communication problem, you need to further determine what is causing it. As long as the root cause of the fault is resolved, you can access the 192.168.1.1 page to open the router.
Determine the cause of the fault:
The network error command ping192.168.1.1 is needed here. Just run this command under the cmd program under Windows 7 system, and you can judge based on the running results. Is it a problem with the router's WEB server or a network communication problem?
Open the cmd program. Method: Click the Start menu button of Windows 7, enter cmd in the operation box and return to the vehicle.
Execute the ping 192.168.1.1 command in the command prompt (cmd). Method: Enter ping192.168.1.1 directly into cmd, then press Enter, and determine where it is based on the Enter result.
There are two results after running ping192.168.1.1: success and failure. If the ping is successful, it means that the failure to open the 192.168.1.1 page may be caused by a failure of the router's WEB server. The solution is to contact the merchant you purchased from for a return or repair.
The reason for ping failure cannot be determined directly and needs to be further eliminated.
The method is as follows:
Check whether the network cable connection is correct.
You need to plug the LAN interface of the router into any available interface of the router, and observe the indicator lights on the corresponding interface. Is the indicator light of the Internet cable interface of the Windows 7 computer on? Only when the indicator light is on (flashing), it is in a normal state. If it does not light up, it means there is a problem with the connection. Please replace the network cable and reconnect. If the network cable is connected normally, but the 192.168.1.1 page still cannot be opened, it means the local connection configuration in the Windows 7 system or the router DHCP server.
Reconfigure local area connection in Windows7.
Right-click the network and select Properties.
2. Click Change Adapter Settings.
Right-click the local connection and select Properties.
Select Internet Protocol version 4 (TCP/IPv4) and click Properties.
5. Check the Obtain IP address and DNS server address automatically option - click OK.
The above are the reasons and solutions for why the 192.168.1.1 page cannot be opened. If it still cannot be turned on, the router may be damaged and needs to be replaced with a new one.
The above is the detailed content of Page 192.168.1.1 cannot be opened in win7 system. For more information, please follow other related articles on the PHP Chinese website!