utp6 is Category 6 line; "Category 6" refers to Category 6 unshielded twisted pair. The parameters of Category 6 unshielded twisted pair have been greatly improved, and the bandwidth has been extended to 250MHz or higher. ; The transmission frequency of Category 6 lines is 1MHz ~ 250MHz. The Category 6 cabling system should have a large margin in the comprehensive attenuation crosstalk ratio (PS-ACR) at 200MHz. It provides 2 times the bandwidth of Category 5 lines. Category 5 lines are 100M, Cat5e 155M, and Category 6 200M.
#The operating environment of this tutorial: Windows 10 system, Dell G3 computer.
What line is utp6?
UTP Category 6 cable is commonly known as Category 6 cable.
"Category 6" refers to Category 6 unshielded twisted pair. The parameters of Category 6 unshielded twisted pair have been greatly improved, and the bandwidth has been extended to 250MHz or higher.
The transmission frequency of Category 6 lines is 1MHz ~ 250MHz. The Category 6 cabling system should have a large margin in the comprehensive attenuation crosstalk ratio (PS-ACR) at 200MHz, which provides 2 times the bandwidth of Category 5. , Category 5 lines are 100M, Category 5e is 155M, Category 6 is 200M.
Extended information:
Elements of purchasing Category 6 lines
As the infrastructure of network construction, the function of the cabling system is very important. According to statistics, network failures caused by poor cabling systems account for 70% of the failures. Therefore, when choosing a true Category 6 cabling system, you must pay attention to the following elements:
1. A true Category 6 system should meet the performance requirements of Category 6 from connectors, cables to links and channels. These include components such as modules, patch panels, patch cords and cables.
2. The system test report submitted must be the worst-case model defined in the ISO/IEC 11801 and TIA/EIA-568 standards, that is, a 3-connection-point 90-meter link or a 4-connection-point 100-meter link. m channel.
3. Manufacturers should provide comprehensive test data for Category 6 products and systems within the 250MHz bandwidth, and withstand the parameters and indicators required by Category 6 ISO/IEC 11801 and TIA/EIA-568 standards. Compare one by one. The test results of some characteristic frequency points cannot represent the performance within the complete test bandwidth.
For more related knowledge, please visit theFAQcolumn!
The above is the detailed content of What line is utp6?. For more information, please follow other related articles on the PHP Chinese website!