What is the restart command of linux

There are 5 restart commands in Linux, which are: 1. Shutdown command, which can be used to shut down the computer, and can also be used to restart the computer; 2. Poweroff command, which can be used to shut down the calculator. And cut off the power supply; 3. Init command, which can be used to restart through "init 1"; 4. Reboot command, which can cause the host to restart; 5. Halt command, which can be used to restart or shut down.

#The operating environment of this tutorial: linux5.9.8 system, Dell G3 computer.

What is the restart command of Linux?

1. Five Linux restart commands

1、shutdown

2、poweroff

3、init

4, reboot

5, halt

2. Specific instructions for the five restart commands

Some commonly used commands under Linux The shutdown/restart commands include shutdown, halt, reboot, and init. They can all achieve the purpose of restarting the system, but the internal working process of each command is different. Through the introduction of this article, I hope you can use various methods more flexibly. Shutdown command.

1.shutdown

The shutdown command safely shuts down the system. Some users will shut down Linux by directly cutting off the power supply, which is very dangerous. Because Linux is different from Windows, there are many processes running in the background, so forced shutdown may cause the data of the process to be lost, put the system in an unstable state, and even damage the hardware equipment in some systems. If you use the shutdown command before shutting down the system, the system administrator will notify all logged-in users that the system will be shut down. And the login command will be frozen, that is, new users can no longer log in. It is possible to shut down directly or delay the shutdown for a certain period of time, and it is also possible to restart. This is determined by the fact that all processes will receive signals sent by the system. This gives programs like vi time to save the document currently being edited, and programs like mail and news can exit normally, etc.

Shutdown performs its job by sending a signal to the init program, asking it to change the runlevel.

Runlevel 0 is used to shut down (halt), runlevel 6 is used to reactivate (reboot) the system, and runlevel 1 is used to put the system into a state where management work can be performed; this is the default , assuming there is no -h or -r parameter to shutdown. To understand what actions were taken during the shutdown (halt) or restart (reboot) process, you can see the runlevels-related information in this file /etc/inittab.

shutdown Parameter description:

　[-t] Tell init how long to shut down before changing to other runlevels.

　[-r] Restart the calculator.

　[-k] does not actually shut down, but only sends a warning signal to

　every login [login].

　[-h] Turn off the power after shutdown [halt].

　[-n] No need to init, but shut down by yourself. Using this option is discouraged, and the consequences of this option are often not always what you expect.

　[-c] cancel current processCancel the shutdown program currently being executed. So of course this option has no time parameter, but you can enter a message to explain it, and this message will be sent to each user.

　[-f] Ignore fsck when restarting the calculator [reboot].

　[-F] Force fsck when restarting the calculator [reboot].

　[-time] Set the time before shutdown [shutdown].

2.poweroff

The poweroff command is used to turn off the calculator and cut off the power supply.

Usage permissions: System administrator.

Syntax

poweroff [-n] [-w] [-d] [-f] [-i] [-h]

Parameter description:

-n: Do not write the memory data back to the hard disk before shutting down

-w: And It will not actually shut down, but will only write records to the /var/log/wtmp file

-d: Do not write records to the /var/log/wtmp file

-i: Stop all network-related devices before shutting down.

-p: Set all hardware in the system to standby mode before shutting down the operating system.

Example

Shut down the system

# poweroff

3.halt----The simplest shutdown command

In fact, halt is to call shutdown -h. When halt is executed, the application process is killed, the sync system call is executed, and the kernel is stopped after the file system write operation is completed.

Parameter description:

[-n] Prevent sync system calls. It is used after patching the root partition with fsck to prevent the kernel from overwriting the patched one with an older version of the superblock. Super block.

　[-w] is not a real restart or shutdown, but just writes the

　wtmp [/var/log/wtmp] record.

　[-d] Do not write wtmp records [included in option [-n]].

　[-f] Force shutdown or restart without calling shutdown.

　[-i] Before shutting down (or restarting), turn off all network interfaces.

　[-p] This option is the default option. Just call poweroff when shutting down.

4.reboot

The working process of reboot is almost the same as halt, but it causes the host to restart, while halt is to shut down. Its parameters are similar to halt.

5.init

　Init is the ancestor of all processes, and its process number is always 1, so sending the TERM signal to init will terminate all user processes, daemon processes, etc. shutdown uses this mechanism. init defines 8 runlevels (runlevel), init 0 is shutdown, init 1 is restart. There can be a lengthy discussion about init, but I won’t go into it here. There are also telinit commands that can change the running level of init. For example, telinit -iS can make the system enter single-user mode, and the information and waiting time when using shutdown will not be obtained.

Recommended learning: "Linux Video Tutorial"

The above is the detailed content of What is the restart command of linux. For more information, please follow other related articles on the PHP Chinese website!