vivox27 does not support face recognition. Vivo X27 is equipped with the HD version of the sixth-generation screen fingerprint technology. Compared with the fifth-generation screen fingerprint, the built-in fingerprint recognition module doubles the Sensor sensing area, increases the finger detection area by 27% (7×7 mm), and improves the dynamic range. 30%, and the recognition rate in special scenes (dry fingers, low temperature) is increased by 50%.
#The operating environment of this tutorial: Funtouch OS 13 system, vivo NEX mobile phone.
vivo X27 is a mobile phone product released by vivo at the spring new product launch conference held in Sanya, Hainan on March 19, 2019.
vivo X27 is equipped with Qualcomm Snapdragon 710 processor (8GB 256GB version) or Qualcomm Snapdragon 675 processor (8GB 128GB version), runs FuntouchOS 9 operating system, supports cloud services, and supports screen fingerprint recognition. The screen uses a 6.39-inch zero-edge full screen with a screen ratio of 19.5:9, a resolution of 2340*1080, and a screen-to-body ratio of 91.6%. The camera uses a 16-megapixel pop-up front camera, and the rear camera uses a 48-megapixel wide-angle night scene triple camera. The battery uses a 4000mAh capacity battery and supports 22.5W dual-engine flash charging function.
Body design
vivo X27 has a body height of 157.66 mm, a width of 74.26 mm, a thickness of 8.95 mm, and a weight of 188.3 grams.
vivo X27 adopts peacock pattern texture, introducing nano-scale multiple exposure and plasma polishing technology, and the back of the fuselage presents a peacock feather texture. In terms of color matching, vivo X27 (8GB 256GB version) is available in four colors: bird feather blue, pink gold, fantasy summer, and impression summer; vivo X27 (8GB 128GB version) is available in bird feather blue, pink gold, emerald, fantasy summer, and Impression of the five colors of summer.
Unlocking method
vivo X27 is equipped with the HD version of the sixth-generation screen fingerprint technology. The built-in fingerprint recognition module has a larger Sensor sensing area than the fifth-generation screen fingerprint. Increased by 1 times, the detection finger area increases by 27% (7×7 mm), the dynamic range increases by 30%, and the recognition rate in special scenes (dry fingers, low temperature) increases by 50%.
Processor
vivo X27 is equipped with Qualcomm Snapdragon 710 processor or Qualcomm Snapdragon 675 processor. The Snapdragon 710 processor is the third 10 Nano's SOC (Samsung's second-generation 10-nanometer LPP process) adopts a 2-6 core architecture, with two 2.2GHz CPUs and six 1.7GHz cores, introduces a shared L3 level three cache, and is equipped with an Adreno 616 graphics card.
Screen
vivo X27 adopts a zero-edge full-screen design and is equipped with a 6.39-inch Super AMOLED screen with a screen ratio of 19.5:9 and a resolution of 2340×1080. Accounting for 91.6%.
|
function
|
vivo X27 (8GB 256GB version)
|
vivo X27 (8GB 128GB version)
|
|---|---|---|
| ##Processor | CPU Model: Qualcomm 710; number of CPU cores: eight-core processor | CPU model: Qualcomm Snapdragon 675; number of CPU cores: eight-core processor |
| Memory and Capacity | 8GB 256GB | 8GB 128GB |
| Screen | 6.39-inch zero-edge full screen, screen ratio: 19.5:9, screen resolution: 2340×1080; screen-to-body ratio: 91.6%; Screen material: Super AMOLED; Touch screen type: Capacitive multi-touch | |
| Camera | Front camera: 16-megapixel pop-up camera; Camera aperture: f/2.09 Rear camera: Number of cameras: Three wide-angle night scenes; Camera pixels: 48-megapixel main 13-megapixel wide-angle camera, 5-megapixel secondary camera; camera aperture: f/1.79 (rear main camera), f/2.2 (rear wide-angle), f/2.48 (rear secondary camera) Features : Support super backlight, super night scene, portrait color, star filter; support autofocus, support rear flash Shooting modes: professional, panoramic, night scene, AI beauty, photo, short video, video, AR Mengpai Video recording format: MP4 | |
|
Fingerprint recognition
|
Support screen fingerprint recognition (sixth generation screen fingerprint HD version)
|
Support screen fingerprint recognition
|
|
Charging and battery
|
4000mAh non-removable battery, supports 22.5W flash Charging, supports bright screen fast charging
|
4000mAh non-removable battery, supports 18W dual-engine flash charging, supports bright screen fast charging
|
|
Network and Standard
|
Support dual card dual standby full Netcom, support 2G/3G/4G network, network frequency band: 2G GSM: 850/900/1800/1900MHz; 3G TD-SCDMA: B34/B39; 3G CDMA: BC0; 3G WCDMA: B1/B2/B4/B5/B8; 4G TDD-LTE: B34/B38/B39/B40/B41; 4G FDD-LTE: B1/B2/ B3/B4/B5/B8; 4G TD-LTE: B38/B39/B40/B41; 4G FDD-LTE: B1/B3 (Note: The supported frequency band of 4G FDD-LTE in the mobile full Netcom version X27 (V1829T) is: B1 /B2/B3/B4/B5/B7/B8/12 (17))
Data connection: supports WLAN hotspot, supports Bluetooth transmission, supports OTG
Dual card usage instructions:
Full Netcom version The card (non-data card) must activate the VoLTE service and enable the VoLTE high-definition call on the mobile phone. At the same time, the operator's network needs to support the 4G VoLTE service to use dual telecom cards.
Mobile full Netcom version card, and cannot be modified through settings; if you use two mobile cards or two non-mobile cards (China Unicom card, China Telecom card), you can manually switch the data network through settings, and arbitrarily set Card 1 and Card 2 as Internet cards; if When using two telecom cards at the same time, the secondary card (non-data card) must activate the VoLTE service and enable VoLTE high-definition calls on the mobile phone. At the same time, the operator's network needs to support 4G VoLTE business to use dual telecom cards.
|
Support dual SIM dual standby full Netcom, support 2G/3G/4G network, network frequency band: 2G GSM: 850/900/1800/1900MHz; 3G TD-SCDMA: B34/B39 ; 3G CDMA: BC0; 3G WCDMA: B1/B4/B5/B8; 4G TDD-LTE: B34/B38/B39/B40/B41; 4G FDD-LTE: B1/B3/B4/B5/B8; 4G TDD- LTE: B39/B40/B41; 4G FDD-LTE: B1/B3/B1 B3.
Data connection: supports WLAN hotspot, supports Bluetooth transmission, supports OTG
Dual card usage instructions: Full Netcom version (Non-data card) You must activate the VoLTE service and enable VoLTE high-definition calls on your mobile phone. At the same time, the operator's network needs to support 4G VoLTE service to use dual telecom cards. Mobile Full Netcom Edition It cannot be modified through settings; if you use two mobile cards or two non-mobile cards (China Unicom card, China Telecom card), you can manually switch the data network through settings, and set Card 1 and Card 2 as Internet cards at will; if you use both cards at the same time, you can manually switch the data network. A telecom card, and the secondary card (non-data card) must activate the VoLTE service and enable VoLTE high-definition calls on the mobile phone. At the same time, the operator's network needs to support 4G VoLTE service to use dual telecom cards.
|
|
Navigation and positioning
|
Support BDS, support GPS, support GLONASS, support Galileo
|
|
|
Sensor
|
Supports gravity sensor, light sensor, proximity sensor, gyroscope, electronic compass
|
Supports gravity sensor, light sensor, proximity sensor, gyroscope, electronic compass, acceleration sensor, Hall sensor, heart rate sensor, compass, barometer
|
| ##Multimedia playback | Supports music player; supports recording; supports MP3 ringtones
Audio support: supports AAC/AMR/MIDI/OGG/FLAC/WMA/WAV/APE/MP formats; video support: supports 3GP/MP4 and other formats; image support: supports JPEG and other formats
|
|
| Body interface |
Headphone interface: 3.5mm American standard headphone jack; USB interface type: TYPE-C
|
|
For more related knowledge, please visit theFAQcolumn!
The above is the detailed content of Does vivox27 support face recognition?. For more information, please follow other related articles on the PHP Chinese website!