0x0000004e blue screen code indicates that the I/O input/output driver structure has encountered a problem. The solution is: 1. Use an eraser to wipe the gold finger of the memory stick; 2. Use a brush and hair dryer to clean it. Clean the dust accumulated on the CPU fan, graphics card fan, chassis inner wall, motherboard, etc.; 3. Check for viruses or restore the system; 4. Run a disk scan program to repair or block bad sectors on the disk; 5. Reinstall the system.
The operating environment of this tutorial: Windows 7 system, Dell G3 computer.
What does the 0x0000004e blue screen code mean?
Cause: Indicates that the I/O input/output driver structure has encountered a problem.
The code 0x0000004E appears on the computer blue screen. It can be checked and solved from the following reasons:
1. Memory reasons. If the memory contact is poor, the computer will freeze or even be unable to boot.
Solution: Use an eraser to wipe the gold finger of the memory module to remove the oxide layer and ensure that the memory module is installed and operating normally.
2. CPU reasons. If the CPU temperature is too high, the motherboard will start an automatic protection program, which will directly cause the computer to crash and restart. The CPU temperature is too high, usually because the chassis is not clean. The CPU fan has too much dust and cannot run or runs slowly, causing the CPU temperature to be too high.
Solution: Use a brush and hair dryer to clean away the dust accumulated on the CPU fan, graphics card fan, chassis inner wall, motherboard, etc.
3. System reasons. Due to the impact of missing files or viruses in the system, the system operation is unstable and the computer crashes.
Solution: Check for viruses or restore the system. You can also press F8 to enter the startup menu item when the computer restarts and select "Boot to Last Known Good Configuration".
4. The reason for the hard disk. If there is an illegal shutdown or a sudden power outage while the computer is running, bad sectors may occur on the hard disk or system files may be lost. At this time, the hard drive needs to be repaired for bad sectors.
Solution: Run ScanDisk to repair or block bad sectors on the disk.
5. If none of the above methods solve the problem, it is recommended to reinstall the system.
For more related knowledge, please visit theFAQcolumn!
The above is the detailed content of What does the 0x0000004e blue screen code mean?. For more information, please follow other related articles on the PHP Chinese website!