"hsyv-6" is Category 6 twisted pair (network cable); hsyv means twisted pair, and "6" means CAT6, which is Category 6. Category 6 network cable supports up to Gigabit network , is an upgraded version of 100M Category 5 network cable. Category 6 twisted pair has certain differences in appearance and structure from Category 5 or Category 5e twisted pair. It not only adds an insulated cross skeleton, but also adds The four pairs of wires are placed in the four grooves of the cross frame, and the diameter of the cable is also thicker.
The operating environment of this tutorial: Windows 10 system, DELL G3 computer.
hsyv-6 is a category six twisted pair (network cable). Among them, hsyv means twisted pair, and 6 means CAT6 (Category 6). Category 6 network cable supports up to Gigabit network and is an upgraded version of 100M Category 5 network cable.
The shape and structure of Category 6 twisted pair cables are somewhat different from those of Category 5 or Category 5e twisted pairs. It not only adds an insulating cross skeleton, The four pairs of twisted pairs are placed in the four grooves of the cross frame, and the diameter of the cable is also thicker.
In addition, the premise of a Gigabit network is that the lines through which data packets pass, including switches and routers, must support Gigabit, otherwise the Gigabit function will not be achieved. For example, if the router outlet is 100M (100M), even if the port is connected to a Category 6 network cable, the maximum transmission speed is only 100M bandwidth.
HSYV-6 Category 6 network cable UTP-6HSYV-6 has greatly improved various parameters, and the transmission frequency has also been extended to 250MHz or higher. The shape and structure of Category 6 twisted pair are somewhat different from those of Category 5 or Category 5e. It not only adds an insulated cross frame, but also places the four pairs of twisted pairs on the four sides of the cross frame. groove, and the diameter of the cable is thicker.
HSYV-6 Category 6 network cable UTP-6HSYV-6 determines a new performance evaluation index. It uses single-core bare copper with specification 23AWG as the conductor, clustered polymer material as the insulator, and the outer sheath material is flame retardant. Polymer material, gray in color; the twisted pair meets the requirements of the specification (ISO/IEC), the electrical characteristics exceed the requirements of the Category 6 (Cat. 6) specification, and the cable center cross isolation ensures NEXT performance and reasonable construction bending radius. LSZH: stands for "low smoke and halogen-free". Low-smoke halogen-free materials can meet safety and environmental protection requirements.
HSYV-6 Category 6 network cable UTP-6HSYV-6 can be used for voice, integrated services data network (ISDN), ATM155Mbps and 622Mbps, 100MbpsTPDDI, Fast Ethernet and Gigabit Ethernet; better than Category 5 and Super 5 The class has the characteristics of long transmission distance, small transmission loss, wear resistance and pressure resistance. HSYV-6 Category 6 network cable UTP-6HSYV-6 HSYV-6 Category 6 network cable UTP-6HSYV-6 HSYV-6 Category 6 network cable UTP-6HSYV-6 HSYV-6 Category 6 network cable UTP-6HSYV-6
The difference between Category 5e and Category 6 lines
The identification of Category 5e line is "CAT5", with a bandwidth of 100M, suitable for networks below 100M; the identification of Category 5e line is "CAT5" CAT5E", with a bandwidth of 155M, is the main product; the Category 6 line is identified as CAT6, with a bandwidth of 250M, and is used to set up Gigabit networks, which is the future development trend.
"Category 5e" refers to Category 5e untwisted pair (UTP—Unshielded Twisted Pair). Untwisted pair cable is composed of multiple pairs of twisted pairs and a plastic sheath. Category 5 refers to five different quality levels for twisted pair cables defined by the Electrical Industry Association. Category 5e non-twisted pair cables are cables that appear after improving some of the performance of existing Category 5 twisted pair cables. Many Performance parameters, such as near-end crosstalk, attenuation crosstalk ratio, return loss, etc., have been improved, but its transmission bandwidth is still 100Mb/s.
The Category 5e twisted pair also uses 4 winding pairs and 1 tensile wire. The colors of the wire pairs are exactly the same as the Category 5 twisted pair, which are white-orange, orange, white-green, green, White-blue, blue, white-brown and brown. The bare copper wire diameter is 0.51mm (wire gauge is 24AWG), the insulated wire diameter is 0.92mm, and the UTP cable diameter is 5mm. Although Category 5e non-twisted pair cables can also provide transmission bandwidths up to 1000Mb/s, they often require the support of expensive special equipment. Therefore, it is usually only used in 100Mb/s Fast Ethernet to connect desktop switches to computers. If you are not planning to upgrade your network to Gigabit Ethernet in the future, you may wish to use Category 5e non-twisted pair cabling in horizontal cabling.
Usually, the twisting period of 4 pairs of twisted pairs is within 38.1mm, twisted in counterclockwise direction, and the twisted length of one pair is within 12.7mm.
HSYV-6 Category 6 network cable UTP-6HSYV-6 "Category 6" refers to Category 6 non-twisted pair: the parameters of Category 6 non-twisted pair have been greatly improved, and the bandwidth has been extended to 250MHz or higher. The shape and structure of Category 6 twisted pair are somewhat different from those of Category 5 or Category 5e. It not only adds an insulated cross frame, but also places the four pairs of twisted pairs on the four sides of the cross frame. groove, and the diameter of the cable is thicker. Category 6 non-twisted pair bare copper wire diameter is 0.57mm (wire gauge is 23AWG), insulated wire diameter is 1.02mm, and UTP cable diameter is 6.53mm.
For more relevant knowledge, please visit theFAQcolumn!
The above is the detailed content of What types of network cables are hsyv-6?. For more information, please follow other related articles on the PHP Chinese website!