The reason why Linux generates a zombie (zombie process) is: after the parent process generates a child process, the child process exits before the parent process, but the parent process does not process the exit signal sent by the child process, so the child process will be It is called a zombie process; at this time, the process cannot be killed even with the root identity. It can be solved by killing the parent process of the child process.
#The operating environment of this tutorial: linux7.3 system, Dell G3 computer.
What is the reason why Linux generates zombie
Cause:
Zombie process, the English name is zombie process, as the name suggests, it is a dead process. So what is the origin of the zombie process?
The reason why the zombie process is generated is that after the parent process creates a child process, the child process exits before the parent process, but the parent process does not process the data sent by the child process due to various reasons. Exit signal, then this child process will become a zombie process.
This is the so-called zombie (zombie process). It means that during the fork()/execve() process, it is assumed that the parent process still exists when the child process ends, and the parent process has not installed the SIGCHLD signal before fork(). If the processing function calls waitpid() to wait for the child process to end, and does not explicitly ignore the signal, the child process becomes a zombie process and cannot end normally. At this time, even kill -9 as root cannot kill the zombie process. The remedy is to kill the parent process of the zombie process (the parent process of the zombie process must exist). The zombie process becomes an "orphan process" and is adopted by process No. 1, init. Init will always be responsible for cleaning up the zombie process.
The zombie process refers to the parent process that has exited, and if no process accepts the process after it is dead, it becomes a zombie process. (zombie) process
Solution:
(1) The parent process waits for the child process to end through functions such as wait and waitpid, which will cause the parent process to hang.
When the wait() or waitpid() system call is executed, the child process will return its data in the process table to the parent process immediately after termination. At this time, the system will immediately delete the entry point. In this case, the defunct process will not be generated.
(2) If the parent process is very busy, you can use the signal function to install a handler for SIGCHLD. After the child process ends, the parent process will receive the signal and can call wait in the handler to recycle.
(3) If the parent process does not care when the child process ends, it can use signal (SIGCLD, SIG_IGN) or signal (SIGCHLD, SIG_IGN) to notify the kernel that it is not interested in the end of the child process. Then after the child process ends, the kernel will recycle and no longer send signals to the parent process
(4) Fork twice, the parent process forks a child process, and then continues to work, the child process forks a grandchild process and then exits , then the grandchild process is taken over by init, and after the grandchild process ends, init will recycle it. However, you have to do the recycling of the child process yourself.
Recommended learning: Linux video tutorial
The above is the detailed content of What causes zombies in Linux?. For more information, please follow other related articles on the PHP Chinese website!
Linux: A Look at Its Fundamental StructureApr 16, 2025 am 12:01 AMThe basic structure of Linux includes the kernel, file system, and shell. 1) Kernel management hardware resources and use uname-r to view the version. 2) The EXT4 file system supports large files and logs and is created using mkfs.ext4. 3) Shell provides command line interaction such as Bash, and lists files using ls-l.
Linux Operations: System Administration and MaintenanceApr 15, 2025 am 12:10 AMThe key steps in Linux system management and maintenance include: 1) Master the basic knowledge, such as file system structure and user management; 2) Carry out system monitoring and resource management, use top, htop and other tools; 3) Use system logs to troubleshoot, use journalctl and other tools; 4) Write automated scripts and task scheduling, use cron tools; 5) implement security management and protection, configure firewalls through iptables; 6) Carry out performance optimization and best practices, adjust kernel parameters and develop good habits.
Understanding Linux's Maintenance Mode: The EssentialsApr 14, 2025 am 12:04 AMLinux maintenance mode is entered by adding init=/bin/bash or single parameters at startup. 1. Enter maintenance mode: Edit the GRUB menu and add startup parameters. 2. Remount the file system to read and write mode: mount-oremount,rw/. 3. Repair the file system: Use the fsck command, such as fsck/dev/sda1. 4. Back up the data and operate with caution to avoid data loss.
How Debian improves Hadoop data processing speedApr 13, 2025 am 11:54 AMThis article discusses how to improve Hadoop data processing efficiency on Debian systems. Optimization strategies cover hardware upgrades, operating system parameter adjustments, Hadoop configuration modifications, and the use of efficient algorithms and tools. 1. Hardware resource strengthening ensures that all nodes have consistent hardware configurations, especially paying attention to CPU, memory and network equipment performance. Choosing high-performance hardware components is essential to improve overall processing speed. 2. Operating system tunes file descriptors and network connections: Modify the /etc/security/limits.conf file to increase the upper limit of file descriptors and network connections allowed to be opened at the same time by the system. JVM parameter adjustment: Adjust in hadoop-env.sh file
How to learn Debian syslogApr 13, 2025 am 11:51 AMThis guide will guide you to learn how to use Syslog in Debian systems. Syslog is a key service in Linux systems for logging system and application log messages. It helps administrators monitor and analyze system activity to quickly identify and resolve problems. 1. Basic knowledge of Syslog The core functions of Syslog include: centrally collecting and managing log messages; supporting multiple log output formats and target locations (such as files or networks); providing real-time log viewing and filtering functions. 2. Install and configure Syslog (using Rsyslog) The Debian system uses Rsyslog by default. You can install it with the following command: sudoaptupdatesud
How to choose Hadoop version in DebianApr 13, 2025 am 11:48 AMWhen choosing a Hadoop version suitable for Debian system, the following key factors need to be considered: 1. Stability and long-term support: For users who pursue stability and security, it is recommended to choose a Debian stable version, such as Debian11 (Bullseye). This version has been fully tested and has a support cycle of up to five years, which can ensure the stable operation of the system. 2. Package update speed: If you need to use the latest Hadoop features and features, you can consider Debian's unstable version (Sid). However, it should be noted that unstable versions may have compatibility issues and stability risks. 3. Community support and resources: Debian has huge community support, which can provide rich documentation and
TigerVNC share file method on DebianApr 13, 2025 am 11:45 AMThis article describes how to use TigerVNC to share files on Debian systems. You need to install the TigerVNC server first and then configure it. 1. Install the TigerVNC server and open the terminal. Update the software package list: sudoaptupdate to install TigerVNC server: sudoaptinstalltigervnc-standalone-servertigervnc-common 2. Configure TigerVNC server to set VNC server password: vncpasswd Start VNC server: vncserver:1-localhostno
Debian mail server firewall configuration tipsApr 13, 2025 am 11:42 AMConfiguring a Debian mail server's firewall is an important step in ensuring server security. The following are several commonly used firewall configuration methods, including the use of iptables and firewalld. Use iptables to configure firewall to install iptables (if not already installed): sudoapt-getupdatesudoapt-getinstalliptablesView current iptables rules: sudoiptables-L configuration
Hot AI Tools
Undresser.AI Undress
AI-powered app for creating realistic nude photos
AI Clothes Remover
Online AI tool for removing clothes from photos.
Undress AI Tool
Undress images for free
Clothoff.io
AI clothes remover
AI Hentai Generator
Generate AI Hentai for free.
Hot Article
Hot Tools
SublimeText3 Chinese version
Chinese version, very easy to use
ZendStudio 13.5.1 Mac
Powerful PHP integrated development environment
Zend Studio 13.0.1
Powerful PHP integrated development environment
MinGW - Minimalist GNU for Windows
This project is in the process of being migrated to osdn.net/projects/mingw, you can continue to follow us there. MinGW: A native Windows port of the GNU Compiler Collection (GCC), freely distributable import libraries and header files for building native Windows applications; includes extensions to the MSVC runtime to support C99 functionality. All MinGW software can run on 64-bit Windows platforms.
Atom editor mac version download
The most popular open source editor
