Detailed analysis of git-merge (organized and shared)

and--strategy=##-s < strategy>

--strategy=are used to specify the merge strategy. By default, if this parameter is not specified, git will use the default merge strategy according to the following conditions:When the merge node only contains a single parent node (such as when using fast-forward mode), the recursive strategy will be used ( introduced below).

When the merged node contains multiple parent nodes (such as when using no-fast-forward mode), the octopus strategy (described below) is used.
2. 2.9
-X

--strategy-option=在- s

2.10--verify-signatures

--no-verify-signaturesis used to verify whether the merged node has a GPG signature , and ignore those nodes without GPG signature verification in the merge.(The following quote is taken from a reprinted article. Since I have not found the original author, I cannot provide the original author information and the original link. If there is any infringement, please let me know via private message or comment, and I will delete the following quote.)

GPG is encryption software. You can use the public key generated by GPG to safely spread your files and codes on the Internet.

Why is there such a need? From development to release to later update iterations of a project, there will definitely be a number of stable versions and development versions (there are instability factors). As project initiators and holders, they have the right to define a stable version that they (they) recognize. This stable version will not allow other developers to make changes. Take Google's repo project as an example. The project owner defines point A in the project development process as the stable version v1.12.3. Then after users download the v1.12.3 version, they will definitely use the projects and products generated by point A. Even if other developers can re-specify v1.12.3 locally and specify it to their modified point B, when the modified version is finally used by users, there will be a problem that GPG signature verification fails, that is to say, this is The modification will not take effect.

2.11

—summary

--no-summaryand--stat

--no-statis similar and will be removed in a future version.2.12-q

--quietoperate silently and do not display merge progress information.

-v

--verbosedisplay detailed merge result information.

2.14--progressand--no-progress

switch whether to display the merged progress information. If neither is specified, a message will be displayed on the connected terminal when standard error occurs. Note that not all merge strategies support progress reporting.

2.15-S[]and--gpg-sign[=]

GPG signature.

2.16-m

Set the commit information used when creating merge nodes.
If the--logparameter is specified, the short log of the commit node will be appended to the commit message.

2.17--[no-]rerere-autoupdate

rerere means reuse recorded resolution, reuse the recorded solution. It allows you to ask Git to remember how to resolve a block conflict so that the next time you see the same conflict, Git can automatically resolve it for you.

2.18--abort

Abandon the current merge conflict handling process and try to reconstruct the pre-merge state.

3. Other concepts about merging

3.1 Detection before merging

When merging external branches, you should keep your own branches clean, otherwise there will be merge conflicts. It will cause a lot of trouble.
In order to avoid recording irrelevant files when merging commits, the git-pull and git-merge commands will stop if there are any uncommitted files registered in the HEAD node pointed to by index.

3.2fast-forward merge

Normally branch merge will produce a merge node, but there are exceptions in some special cases. For example, when calling the git pull command to update the remote code, if the local branch does not have any commits, there is no need to generate a merge node. In this case, a merge node will not be generated, and HEAD points directly to the updated top code. This merge strategy is fast-forward merge.

3.3 Merger details

In addition to the fast-forward merge mode mentioned above, the merged branch will be tied to the current branch through a merge node. The merge node will also Have the top node of the current branch before merging and the top node of the other branch, both as parent nodes.
A merged version will make the changes in all related branches consistent, including the commit node, HEAD node and index pointer, and the node tree will be updated. As long as the files in these nodes do not overlap, changes to these files will be modified and updated in the node tree.
If these changes cannot be merged explicitly, the following will happen:

1. The node pointed to by the HEAD pointer remains unchanged
2. MERGE_HEADPointer Are placed on top of other branches
3. The merged clean path is updated simultaneously in the index file and the node tree
4. For conflict paths, the index file records three versions: version 1 records two The common ancestor node, version 2 records the top of the current branch, that is, HEAD, and version 3 recordsMERGE_HEAD. The files in the node tree contain the results of the merge program. For example, the three-way merge algorithm can cause conflicts.
5. No other changes have occurred. In particular, local modifications you made previously will remain intact.
   If you tried a merge that resulted in a very complex conflict and want to start over, you can usegit merge --abort

About three-way merge Algorithm:
The three-way merge algorithm is a way to resolve conflicts. When a conflict occurs, the three-way merge algorithm will obtain three nodes: the B node of the local conflict, the C node of the other branch, and the B and C nodes. The common most recent ancestor node A. The three-way merge algorithm will merge based on these three nodes. The specific process is to compare nodes B and C with node A. If a file in node B and C is the same as that in node A, then there will be no conflict; if only one of B or C has changed compared to node A, then The file will adopt the changed version; if B and C have changed compared with A, and the changes are not the same, then you need to merge them manually; if B and C have changed, and the changes are the same, then There will be no conflict and the changed version will be automatically adopted. After the final merger, D node will be generated. D node has two parent nodes, namely B and C.

3.4 Merge tag

When merging a tag, Git always creates a merged commit, even if fast-forward mode can be used at this time. The template of the submission information is preset to the information of the tag. Additionally, if the tag is signed, signature detection information will be appended to the commit message template.

3.5 How conflicts are expressed

When a merge conflict occurs, this part will end with<<<<<<<,========and >>>>>>> represent. The part before =======is the situation on the current branch, and the part after ========is the situation on the other side's branch. >>>>>>>

3.6 How to resolve conflicts

After seeing the conflict, you can choose the following two methods:

• Decided not to merge. At this time, the only thing to do is to reset the index to the HEAD node.git merge --abortis used in this situation.
• Resolve conflicts. Git will mark the conflict. After resolving the conflict, usegit addto add it to the index, and then usegit committo generate a merge node.
  You can use the following tools to resolve conflicts:
• Use the merge tool.git mergetoolwill call a visual merge tool to handle conflicting merges.
• View the differences.git diffwill display the three-way difference (the three-way comparison algorithm used in the three-way merge).
• View the differences for each branch.git log --merge -p will display the difference between theHEADversion and theMERGE_HEADversion.
• View the version before the merge.git show :1:File nameDisplays the version of the common ancestor,git show :2:File nameDisplays the HEAD version of the current branch,git show :3:File nameDisplay theMERGE_HEADversion of the other party's branch.

4. Merge strategy

Git can specify the merge strategy by adding the -s parameter. Some merge strategies even have their own parameter options. Use-Xto set the parameter options of these merge strategies. (Don't forget that merging can happen in both git merge and git pull commands, so this merge strategy applies to git pull as well).

4.1resolve

Only use the three-way merge algorithm to merge the top nodes of two branches (such as the current branch and another branch you pulled down). This merge strategy follows a three-way merge algorithm, where the HEAD nodes of the two branches and the common child nodes perform a three-way merge.
Of course, what really bothers us is the situation of cross-merge (criss-cross merge). The so-called cross-merging refers to the situation where there are multiple common ancestor nodes. For example, when two branches are merged, it is very likely that there are two common ancestor nodes. At this time, the merger cannot be performed according to the three-way merge algorithm (because Common ancestor nodes are not unique). This is how the resolve strategy handles cross-merge problems. Here is a reference to "Version Control with Git":

In criss-cross merge situations, where there is more than one possible merge basis, the resolve strategy works like this: pick one of the possible merge bases, and hope for the best. This is actually not as bad as it sounds. It often turns out that the users have been working on different parts of the code. In that case, Git detects that it's remerging some changes that are already in place and skips the duplicate changes, avoiding the conflict. Or, if these are slight changes that do cause conflict, at least the conflict should be easy for the developer to handle

Here is a brief translation: In the case of cross-merging, there is more than one merge reference point (common ancestor node). The resolve strategy works like this: select one of the possible merge reference points and expect this to be the most merged reference point. good result. This is actually not as bad as it sounds. Usually users modify different parts of the code, in which case many merge conflicts are actually redundant and repetitive. When using resolve to merge, the conflicts generated are easier to handle, and there are very few cases where code will actually be lost.

4.2recursive

Only use the three-way merge algorithm to merge two branches. Different from resolve, in the case of cross merge, this merge method is called recursively. Starting from the different nodes of the two branches after the common ancestor node, the three-way merge algorithm is recursively called to merge. If a conflict occurs, then the file The merge will no longer continue and conflicts will be thrown directly; other files without conflicts will be executed until the top node. Additionally, this approach is able to detect and handle operations involving modification of file names. This is the default merge action for git merging and pulling code.
The recursive merge strategy has the following parameters:

4.2.1 ours

This parameter will force the version of the current branch to be automatically used when a conflict occurs. This merge method will not cause any trouble, and even git will not check the conflict content contained in other branch versions. This method will discard any conflict content in the other branch.

4.2.2 theirs

is exactly the opposite of ours.
Both theirs and ours parameters are suitable for merging binary file conflicts.

4.2.2 patience

With this parameter,git merge-recursiveSpend some extra time to avoid missing unimportant lines (such as functions) brackets). If the version branch separation between the current branch and the other branch is very large, it is recommended to use this merge method.

4.2.3diff-algorithm=[patience|minimal|histogram|myers]

Informationgit merge-recursiveUse a different comparison algorithm .

4.2.4ignore-space-change,ignore-all-space,ignore-space-at-eol

Treat space conflicts according to the specified parameters.

• If the other party's version only adds changes in spaces, then our own version will be used when the conflict is merged
• If our version contains spaces, but the other party's version contains a large number of changes, then the conflict will occur Use the other party's version when merging
• Use the normal process

4.2.5no-renames

Turn off rename detection.

4.2.6subtree[=]

This option is an advanced form of subtree merge strategy, which will guess the process of merging two node trees. How to move in. The difference is that the specified path will be removed at the beginning of the merge, so that other paths can be matched when looking for subtrees. (See below for details on the subtree merge strategy)

4.3octopus

This merge method is used for more than two branches, but it will refuse to merge when conflicts require manual merge. This merge method is more suitable for bundling multiple branches together and is also the default merge strategy for multi-branch merges.

4.4ours

This method can merge any number of branches, but the merged result of the node tree is always the conflicting part of the current branch. This method can be very efficient when replacing older versions. Please note that this method is different from the ours parameter under the recursive strategy.

4.5subtree

Subtree is a modified version of the recursive strategy. When merging tree A and tree B, if B is a subtree of A, B first adjusts to match the tree structure of A instead of reading the same node.

4.5 Summary

When using the three-way merge strategy (referring to the default recursive strategy), if a file (or a line of code) changes in both the current branch and the other branch, but slightly Then it rolls back on one of the branches,then this rollback change will be reflected in the result. This point may confuse some people. This is because during the merge process, git only focuses on the common ancestor node and the HEAD node of the two branches, rather than all nodes of the two branches. Therefore, the merge algorithm will regard the rolled-back part asunchanged, so that the merged result will become the changed part of the other branch.

5. Some personal opinions on the use of Git

I have always believed that Git is a very excellent version control tool, but many people in the company find Git difficult to use. A large part of the reason for this situation is that the inertia brought by the previous use of subversion has an impact on accepting new technologies; on the other hand, many people only use Git through the GUI client. For a long time, most people have thought that using GUI is a more convenient way to get started. In fact, this is questionable. According to my personal experience, using GUI can create inertia, and operations can often be completed by clicking a few buttons, making many people think that learning Git commands is a waste of time and energy. But in fact, without a clear understanding of Git commands and ideas, using those simple buttons will actually cause a lot of trouble: many people have no idea what will happen after clicking the button, and the GUI is too smart to let the same button The click event may correspond to commands with different parameters. In the end, it is the poor users who are really hurt because they have no idea what the problem is.
Based on the content of the full text, here is a summary of some of the conventions that individuals abide by when using Git. The so-called agreement refers to a non-forced and voluntary behavior. Failure to adhere to these conventions will not cause any defects, but complying with these conventions may alleviate difficulties and improve efficiency when using Git.

1. Submit more and push less. When multiple people collaborate, push will frequently cause merge conflicts, affecting efficiency. Therefore, try to use commit commands as much as possible and reduce the use of merge, which will save a lot of time.
2. Use Git Flow (Git Flow), see my other article for details: A successful Git branch model
3. Use branches,Keep the main branch clean. This is something I strongly recommend. Submit on the branch, then switch to the main branch to update (git pull —rebase), then merge the branches and push. Such a process will avoid cross-merging (there will not be multiple common ancestor nodes). In fact, the reason why many people feel overwhelmed by the git merge operation is the cross-merge problem caused by various reasons, which causes some code to be lost during the merge process. Keeping the master branch clean can avoid cross-merges.
4. Disable fast-forward mode. Use the rebase parameter when pulling code (the premise is to keep the main branch clean), and use the -no-ff parameter to disable fast-forward mode when merging. This can not only ensure the clarity of the node, but also avoid cross-merging. Appear.

Recommended study: "Git Learning Tutorial"

The above is the detailed content of Detailed analysis of git-merge (organized and shared). For more information, please follow other related articles on the PHP Chinese website!