Overview of the transport layer: the relationship between ports and processes-Linux Operation and Maintenance-php.cn

Home

Operation and Maintenance

Linux Operation and Maintenance

Overview of the transport layer: the relationship between ports and processes

齐天大圣

Dec 18, 2020 pm 08:00 PM

Inter-process communication

The transport layer is also called the transport layer, which is a special layer. On the one hand, it belongs to the highest level of the communication part, and on the other hand, it is the lowest level of user functions. The transport layer is used for communication between processes on different hosts. For routers that forward packets, it only has the functions of the lower three layers and does not use the transport layer and above.

Process, that is, the running program. In Linux, when a program runs, the operating system assigns a process number to the process. You can use the command ps aux to view all processes.

# ps aux 
USER       PID %CPU %MEM    VSZ   RSS TTY      STAT START   TIME COMMAND
root         1  0.0  0.1  51744  2808 ?        Ss   Jul31  16:06 /usr/lib/systemd/systemd --switched-root --system --deserialize 22
……

Port

The transport layer of TCP/IP uses a 16-bit port number to mark a port, so a host can have 65535 ports . Those who have done web opening must know some commonly used port numbers, such as: 80 of the web server, 3306 of the mysql service and other ports. The processes between the two hosts communicate through their respective port numbers, so the process must also have the function of listening on the port. In Linux, the command to view the monitored port is netstat -tlunp

# netstat -tulnp
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name    
tcp        0      0 0.0.0.0:80              0.0.0.0:*               LISTEN      2449/nginx: worker  
tcp        0      0 0.0.0.0:21              0.0.0.0:*               LISTEN      1010/pure-ftpd (SER 
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      1819/sshd           
……

The port also has the function of multiplexing and demultiplexing. Multiplexing means that multiple application processes of the host can use the same port number to communicate. , and splitting means that the datagrams obtained from the IP layer can be handed over to different application processes through port numbers.

TCP and UDP

The transport layer has only two protocols: Transmission Control Protocol TCP and User Datagram Protocol UDP. These two protocols have their own characteristics and some application scenarios.

TCP is a connection-oriented protocol. A connection must be established before data is transmitted. If data transmission is not required, the connection needs to be disconnected. TCP is a relatively complex protocol with many factors to consider. It can provide end-to-end reliable transmission, but does not support one-to-many and many-to-many communications. Commonly used TCP protocols include HTTP protocol, ftp protocol, telnet protocol, etc.

UDP is for packets. It is relatively simple and uses best efforts rather than reliable transmission. It can perform one-to-one, one-to-many and many-to-many communication. Common protocols that use UDP protocol include DHCP, DNS, and RIP protocols.

There is an example to illustrate their characteristics: TCP is like making a phone call. A connection must be established before the call. UDP is like sending a text message. You don't need to know the status of the other party's host before sending the text message. You don't know whether the text message has been sent or not.

The above is the detailed content of Overview of the transport layer: the relationship between ports and processes. For more information, please follow other related articles on the PHP Chinese website!

Statement

The content of this article is voluntarily contributed by netizens, and the copyright belongs to the original author. This site does not assume corresponding legal responsibility. If you find any content suspected of plagiarism or infringement, please contact admin@php.cn

Linux Operations: System Administration and MaintenanceApr 15, 2025 am 12:10 AM

The key steps in Linux system management and maintenance include: 1) Master the basic knowledge, such as file system structure and user management; 2) Carry out system monitoring and resource management, use top, htop and other tools; 3) Use system logs to troubleshoot, use journalctl and other tools; 4) Write automated scripts and task scheduling, use cron tools; 5) implement security management and protection, configure firewalls through iptables; 6) Carry out performance optimization and best practices, adjust kernel parameters and develop good habits.

Understanding Linux's Maintenance Mode: The EssentialsApr 14, 2025 am 12:04 AM

Linux maintenance mode is entered by adding init=/bin/bash or single parameters at startup. 1. Enter maintenance mode: Edit the GRUB menu and add startup parameters. 2. Remount the file system to read and write mode: mount-oremount,rw/. 3. Repair the file system: Use the fsck command, such as fsck/dev/sda1. 4. Back up the data and operate with caution to avoid data loss.

How Debian improves Hadoop data processing speedApr 13, 2025 am 11:54 AM

This article discusses how to improve Hadoop data processing efficiency on Debian systems. Optimization strategies cover hardware upgrades, operating system parameter adjustments, Hadoop configuration modifications, and the use of efficient algorithms and tools. 1. Hardware resource strengthening ensures that all nodes have consistent hardware configurations, especially paying attention to CPU, memory and network equipment performance. Choosing high-performance hardware components is essential to improve overall processing speed. 2. Operating system tunes file descriptors and network connections: Modify the /etc/security/limits.conf file to increase the upper limit of file descriptors and network connections allowed to be opened at the same time by the system. JVM parameter adjustment: Adjust in hadoop-env.sh file

How to learn Debian syslogApr 13, 2025 am 11:51 AM

This guide will guide you to learn how to use Syslog in Debian systems. Syslog is a key service in Linux systems for logging system and application log messages. It helps administrators monitor and analyze system activity to quickly identify and resolve problems. 1. Basic knowledge of Syslog The core functions of Syslog include: centrally collecting and managing log messages; supporting multiple log output formats and target locations (such as files or networks); providing real-time log viewing and filtering functions. 2. Install and configure Syslog (using Rsyslog) The Debian system uses Rsyslog by default. You can install it with the following command: sudoaptupdatesud

How to choose Hadoop version in DebianApr 13, 2025 am 11:48 AM

When choosing a Hadoop version suitable for Debian system, the following key factors need to be considered: 1. Stability and long-term support: For users who pursue stability and security, it is recommended to choose a Debian stable version, such as Debian11 (Bullseye). This version has been fully tested and has a support cycle of up to five years, which can ensure the stable operation of the system. 2. Package update speed: If you need to use the latest Hadoop features and features, you can consider Debian's unstable version (Sid). However, it should be noted that unstable versions may have compatibility issues and stability risks. 3. Community support and resources: Debian has huge community support, which can provide rich documentation and

TigerVNC share file method on DebianApr 13, 2025 am 11:45 AM

This article describes how to use TigerVNC to share files on Debian systems. You need to install the TigerVNC server first and then configure it. 1. Install the TigerVNC server and open the terminal. Update the software package list: sudoaptupdate to install TigerVNC server: sudoaptinstalltigervnc-standalone-servertigervnc-common 2. Configure TigerVNC server to set VNC server password: vncpasswd Start VNC server: vncserver:1-localhostno

Debian mail server firewall configuration tipsApr 13, 2025 am 11:42 AM

Configuring a Debian mail server's firewall is an important step in ensuring server security. The following are several commonly used firewall configuration methods, including the use of iptables and firewalld. Use iptables to configure firewall to install iptables (if not already installed): sudoapt-getupdatesudoapt-getinstalliptablesView current iptables rules: sudoiptables-L configuration

Debian mail server SSL certificate installation methodApr 13, 2025 am 11:39 AM

The steps to install an SSL certificate on the Debian mail server are as follows: 1. Install the OpenSSL toolkit First, make sure that the OpenSSL toolkit is already installed on your system. If not installed, you can use the following command to install: sudoapt-getupdatesudoapt-getinstallopenssl2. Generate private key and certificate request Next, use OpenSSL to generate a 2048-bit RSA private key and a certificate request (CSR): openss

See all articles