Solution to the problem of computer disk read error and unable to boot: 1. Set [Anti-Virus Protection] to enabled in BIOS settings; 2. Restore BIOS to default, then re-plug and unplug the optical drive data cable. Or replace the optical drive data cable; 3. Use the system disk to repair and install the computer or reinstall the disk to solve the problem.
Solution for computer disk read error and unable to boot:
Disk read error, pressCtrl＋Alt＋DelRestart.
There are many reasons for this problem:
1. Check whether there is a floppy disk in the floppy drive, then enter the BIOS, adjust the startup sequence to A at the end, and turn off A by the way.
2.Set "Anti-Virus Protection" to enabled in BIOS settings. If this is the reason, enter the BIOS and turn off "antivirus protection".
3. Error writing boot sector. Restore the BIOS to default, then re-plug and unplug the optical drive data cable, or change the optical drive data cable.
4. There is a problem with the hard disk. The problem usually lies in the hard drive cable and bad sectors of the hard drive. If the fault is on the connecting cable, replacing the connecting cable can solve the problem. If the hard drive has bad sectors, you can try to use repair software to repair it. If the bad sectors cannot be repaired and the hard drive cannot be repartitioned using FBDISK partitioning software, the only option is to replace the hard drive.
5. System problem. Use the system disk to repair and install the computer or reinstall the grid disk to solve the problem.
6. Caused by poisoning. Enter safe mode and use the latest version of anti-virus software to remove viruses. If the virus cannot be removed, reinstall the system.
If you want to know more about programming learning, please pay attention to thephp trainingcolumn!
The above is the detailed content of What should I do if my computer cannot be turned on due to a disk read error?. For more information, please follow other related articles on the PHP Chinese website!