Solution to 0x000000A5 blue screen code?

0x000000A5 blue screen code solution: 1. Disable the driver identified in the "Stop" message or all newly installed drivers; 2. If the computer cannot start normally, you should try to "Last Known Good Configuration" ” or start in “Safe Mode” and then delete the newly added programs.

##0x000000A5:ACPI_BIOS_ERROR

Usually because the motherboard BIOS cannot fully support the ACPI specification.

Solution: When installing Windows 2K/XP, when the "press F6 if you need to install a third-party SCSI or RAID driver" prompt appears, press the F7 key, so that Windows will automatically disable the installation of ACPI HAL and install Standard PC HAL.

Solution

1. Comprehensive search and killing of viruses, Trojans and malicious plug-ins.

2. After the power is turned off, open the case and clean the dust, check all connections, especially the memory module, unplug the memory, clean the pins and reinsert them firmly; if it is an independent graphics card and network card, handle it in the same way.

3. Run chkdsk /r in the command prompt to inspect the partition where the system is located; this command is executed when restarting, with blue screen and white text, do not interrupt.

4. Set the virtual memory to the partition with larger remaining space.

5. Set the BIOS to factory default values; in the BIOS, set the "ACPI Suspend Type" in the power management settings to S1 (some machines display it as STR) or directly turn off the ACPI option.

6. Use Driver Wizard to update the motherboard, graphics card, sound card, and network card drivers.

Recommended tutorial: "

PHP"

The above is the detailed content of Solution to 0x000000A5 blue screen code?. For more information, please follow other related articles on the PHP Chinese website!