What is the command to check the local IP and port number in Linux?

The Linux command to check the local IP is the "ifconfig" command and the "ip address" command; the Linux command to check the port number is the "lsof -i:port" command and the "netstat -aptn" command.

View the local IP:

1) ifconfig command

The output is as follows:

[root@topgun /home/cly] # ifconfig eth0: flags=4163 mtu 1500 inet 192.168.128.132 netmask 255.255.255.0 broadcast 192.168.128.255 inet6 fe80::20c:29ff:fe45:63ba prefixlen 64 scopeid 0x20 ether 00:0c:29:45:63:ba txqueuelen 1000 (Ethernet) RX packets 1936 bytes 2440516 (2.3 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 1207 bytes 94802 (92.5 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 19 base 0x2024 lo: flags=73 mtu 16436 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 0 (Local Loopback) RX packets 12 bytes 744 (744.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 12 bytes 744 (744.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

This command belongs to the package:

[root@topgun /home/cly] # pacman -Qo ifconfig /sbin/ifconfig 属于 net-tools 1.60.20120804git-2

2) ip address command

The output is as follows:

[root@topgun /home/cly] # ip address 1: lo:  mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0:  mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:29:45:63:ba brd ff:ff:ff:ff:ff:ff inet 192.168.128.132/24 brd 192.168.128.255 scope global eth0 inet6 fe80::20c:29ff:fe45:63ba/64 scope link valid_lft forever preferred_lft forever

This command belongs to the package:

[root@topgun /home/cly] # pacman -Qo ip /usr/sbin/ip 属于 iproute2 3.5.1-1

Linux View the local port

View the specified port

# lsof -i:port

View all ports

# netstat -aptn

Install telnet

#yum install -y telnet.x86_64

telnet ip port

Recommended tutorial: "linux tutorial"

The above is the detailed content of What is the command to check the local IP and port number in Linux?. For more information, please follow other related articles on the PHP Chinese website!