How to fix 0x00000024 blue screen

How to fix the 0x00000024 blue screen? Solution to the blue screen code 0X00000024

1. Download a PE production tool on another computer to make the U disk into a U disk boot disk (PE tool box is recommended).

2. Then restart the computer, press the hotkey continuously (usually DELETE, F11, F12 keys) to enter the BIOS system, set the startup sequence in the BIOS system, and put the U disk Move the boot disk to the first one so that you can enter the PE system. When entering the PE system selection interface, select the latest PE system, and then wait for a while to enter the PE system.

3. After entering the PE system, press win R, run cmd, and enter the command "chkdsk c:/f" (command to check and repair hard disk errors. If a Bad Track is reported, please use Use the check tool provided by the hard disk manufacturer to check and repair. ) This command may take a long time to run, so be patient and wait for a while.

#4. Wait until this command is finished, pull out the USB flash drive, and restart the computer. We will find that we still cannot enter the system at this time, because the hard disk still needs to self-check. After the self-check is completed, it will be OK.

Notes

Blue screen code 0X00000024 error analysis: 00x00000024 is due to an error in the NTFS.sys file (the function of this driver file is to allow the system to read and write disks using the NTFS file system). These two A blue screen error is most likely caused by physical damage to the disk itself, or damage to the interrupt request packet (IRP). Other reasons include: too many hard disk fragments; file read and write operations are too frequent, and the amount of data is very large or It is caused by some disk imaging software or anti-virus software.

The above is the detailed content of How to fix 0x00000024 blue screen. For more information, please follow other related articles on the PHP Chinese website!