How to use brother printer?
Copying method:
1. Open the top cover of the copier , place the side to be copied face down, with the paper end facing right, on the lower right corner of the glass plate, and close the lid.
2. Press the "Copies" key on the printer, press the right arrow key to increase the number of copies (press and hold for three seconds to increase by ten), and the left arrow is to decrease the number of copies.
3. Press the "Lighter/Darker" button, and then press the left arrow to lighten to level 2 (save toner and speed up). 4. Press "Open as Copy"
5. Place the blank side of the copied side up, head inward, and place it flatly into the paper place. 6. Repeat steps 1 and 4 to copy the second side. 7. To make only one copy, just follow steps 1 and 4.
Print method:
1. First click "Preview" the document to see if the printing meets the requirements.
2. When printing, click the "File" menu and click "Print". A. Set the printing "page range" on the left side of the pop-up window as required (otherwise the entire content of the document will be printed, causing waste). B. Set the number of copies on the right side. C. If you want multiple non-important documents, click "Properties" and select "Economic Mode". D. You can click "Manual double-sided printing"
3. Click "OK" at the bottom of the window to start printing and check whether the printout meets the requirements.
4. When printing on both sides, follow the prompts to take out the printed paper (if there is more than one paper, rearrange it in the order of 1, 3, and 5 from top to bottom), with the blank side facing up. , with the head facing inside, and then put it into the paper place. Then click "OK" on the pop-up window.
If there is a printing or copying error, you can press the "Cancel" key immediately. After the paper is out of paper, you can press the "OK" key to continue placing paper.
If necessary, you can turn off the power switch on the left rear side and turn it on again. ? You can print a copy first to try.
Don’t move or pry when the paper is jammed to avoid damage.
The above is the detailed content of How to use brother printer. For more information, please follow other related articles on the PHP Chinese website!