Yaconf usage tutorial for PHP7

This project is actually not a new idea. This is a small tool I made in my first optimization project after coming to Weibo. It is called Weibo_Conf. But because Weibo_Conf is a Weibo extension, there are also Some other functions are specially customized for Weibo. Therefore, they are not suitable for direct open source.

With the release of PHP7, many new persistence types have been added, such as IS_IMMUTABLE_ARRAY, so I redeveloped Yaconf under PHP7 , open source for everyone to use.

Introduction

First of all, let’s talk about what this does.

I have seen many projects , using PHP files for configuration, there may be a dozen or even dozens of .php configuration files in a config directory, which contain various arrays, and even some dictionary files (such as Chinese/English Control) is also put into the configuration. This causes the parsing of the configuration file to consume a lot of performance (admittedly, using opcache can be better, but in fact there is still an execution process).

Except PHP There are also those using json and yaml. A common feature is that the readability of these configurations is relatively poor. In addition, they also require runtime analysis.

The config directory is often together with the code. First there is Security risks (there are often sensitive information in the configuration). Secondly, if the configuration and code belong to the same project, this will cause the modification of the configuration to go through the process of code online.

Some resource configuration files, such as mysql/memcache Configuration information, these contents should be transparent to development, and operation and maintenance can be directly responsible. However, if it is put into the code, if operation and maintenance wants to initiate some changes, development and cooperation must be modified to modify the configuration file and go online.

So, Yaconf is a tool created to solve these problems.

It uses a separate configuration directory (specified in yaconf.directory), not together with the code.

It handles all the configurations to be processed when PHP starts, and then these configurations will reside in memory and live and die with the life cycle of PHP. It avoids parsing the configuration file every time it is requested.

All The configuration contents are all immutable, which can reduce memory usage with the help of Fork's COW, and when accessing the configuration, there is almost no need for any memory copy, and there will be no unnecessary increase or decrease in the reference count

The most important thing is that after the configuration directory and code are separated, a configuration management background can be used to achieve unified management of the configuration.

It supports (for non-ZTS) reloading of configuration changes, that is to say, the configuration If there are changes (it is recommended to use mv instead of cp to change the configuration), it will reload and does not need to be restarted (the frequency of detection is controlled by yaconf.check_delay).

It supports a variety of configuration types, including strings , array, section, section inheritance, and you can also write PHP constants and environment variables directly in the configuration.

The most important thing is, it is very simple.

API

Yaconf only provides two methods,

mixed Yaconf::get(string $name, mixed $default = NULL)

This is to get a configuration, the name is the name of the configuration, generally speaking, if you have an ini file called foo.ini , then if $name uses foo, it will get all the contents in this file and return it in the form of an array. default is the default value returned when the configuration does not exist.

bool Yaconf::has(string $name)

This is to detect whether a configuration exists .

Yaconf configuration items

yaconf.directory

Configuration file directory, this configuration cannot be specified through ini_set because it must be determined when PHP is started.

yaconf.check_delay

How often (seconds) to detect file changes, if it is 0, it will not be detected, that is to say, if it is 0, file changes can only be reloaded by restarting PHP

Configured format

Yaconf uses ini files as configuration files. This is because I have always felt that ini is the most suitable for configuration files. It is in key-value format and is clear and readable.

Simple configuration writing It looks like this (all the following assumes that the name of the ini file is test):

foo="bar" phpversion=PHP_VERSION env=${HOME}

As shown above, we use quotation marks for general configurations. For those that are not quoted, we will try to use PHP constants. Explanation, that is to say, we can write PHP constants directly in the configuration.

In addition, you can also see that we can write environment variables directly in the configuration, such as the above env:

Yaconf::get("test.env"); //test是配置文件名字 //string(16) "/home/huixinchen"

As shown above, you can see that assuming that the value of foo can be accessed through the following code:

Yaconf::get("test.foo"); //test是配置文件名字

Yaconf also supports array type configuration, which is written as follows:

arr.0=1 arr.1=2

If it is For a continuous array, you can also write directly:

arr[]=1 arr[]=2

Then for the value of the array, you can get it through the following code:

Yaconf::get("test.arr");

This will get the arr array in the test configuration file. Of course You can also directly obtain a specific value in the array. For example, if you want to directly obtain the 0th element of the arr array in the test configuration file:

$arr = Yaconf::get("test.arr.0");

Yaconf also supports map type configuration, which is written as follows:

map.foo=bar map.bar=foo

;You can use semicolons to write comments

map2.foo.name=yaconf map2.foo.year=2015

The name value of the foo submap of map2 can be accessed in the following form:

Yaconf::get("test.map2.foo.name"); //test是配置文件名字

And, the configuration file can also be divided into Section, and section inheritance:

[parent] parent="base" children="NULL" [children : parent] children="children"

Please pay attention to the configuration section inheritance syntax children: (colon) parent, which means that the children section inherits all base configuration items. Then you define it in the children section The configuration with the same name as the parent section will overwrite the content defined in the parent.

The value of the children configuration in the childlren section can be accessed in the following form:

Yaconf::get("test.children.children"); //test是配置文件名字

样例

首先, 假设我们的所有的配置文件都放置在/tmp/yaconf中, 那么我们就需要在php.ini中增加如下配置:

yaconf.directory=/tmp/yaconf

这样yaconf在PHP启动的时候, 就会在这个目录下找所有的*.ini文件, 然后尝试处理他们. 这里要注意的是不支持多级目录, 也就是说, yaconf只会处理yaconf.directory内的*.ini文件, 不会处理子目录里面的(这主要是为了简单考虑, 因为有分节, 你就可以一个项目定义一个ini文件).

假设/tmp/yaconf下有俩个ini文件, 分别是:

foo.ini

name="yaconf" year=2015 features[]="fast" features.1="light" features.plus="zero-copy" features.constant=PHP_VERSION bar.ini

[base]

parent="yaconf" children="NULL" [children:base] children="set"

然后对于foo的内容:

php7 -r 'var_dump(Yaconf::get("foo"));' /* array(3) { ["name"]=> string(6) "yaconf" ["year"]=> string(4) "2015" ["features"]=> array(4) { [0]=> string(4) "fast" [1]=> string(5) "light" ["plus"]=> string(9) "zero-copy" ["constant"]=> string(9) "7.0.0-dev" } } */

对于bar的内容:

php7 -r 'var_dump(Yaconf::get("bar"));' /* array(2) { ["base"]=> array(2) { ["parent"]=> string(6) "yaconf" ["children"]=> string(4) "NULL" } ["children"]=> array(2) { ["parent"]=> string(6) "yaconf" ["children"]=> string(3) "set" } } */

当然你可以用 (.)链接语法精确访问任何一个特定的值.

最后

我的Ya系列扩展从此又多了一个新成员, 算上之前的Yaf(PHP框架), Yar(PHP RPC框架), Yac(PHP单机缓存), 大家就可以很容易搭建一套高性能的LAMP应用解决方案出来.

注： Yaconf要求PHP7才能用

推荐教程：《PHP7》

The above is the detailed content of Yaconf usage tutorial for PHP7. For more information, please follow other related articles on the PHP Chinese website!