Home  >  Article  >  How to connect two TVs with one network cable

How to connect two TVs with one network cable

王林
王林Original
2019-12-20 17:59:2455979browse

How to connect two TVs with one network cable

Settings for the first router:

Step 1: Connect the network cable from the modem to the WAN port of the router (the first port) , and pull the network cable from the LAN port to the computer.

Step 2: Set up the router. Use a computer that you can use to dial up the Internet normally. Log in to the router and set up the WAN port. When dialing up the Internet, select PPPOE and set up the account and password

Step 3: Clone the MAC address

Step 4: Save and restart, log in to the router, and see if the IP address is obtained in the running status of the router

Note: If you are currently using Computer dialing requires the use of certain software, and the account and password entered into the router also need to be decoded.

How to connect two TVs with one network cable

Settings for the second router:

Step 1: View IP and DNS

Double-click your local connection and a pop-up will appear In a dialog box, select Support-Details and copy down the IP, subnet mask, network card, and DNS inside.

Step 2: Change the wiring. Unplug the network cable that was just connected to the computer and plug it into the first port of the router. Then pull a network cable from the back port and connect it to the computer. After the local connection is connected, check the IP on the router label and enter the IP of this label into the browser, such as: 192.168.1.1. A window will pop up. Enter the account: admin and password: admin

Step 3: LAN port settings, set to a different IP segment number from the first router, such as: 192.168.1.1 changed to: 192.168.2.1

How to connect two TVs with one network cable

WAN port settings, select static IP, enter the recorded IP, DNS, etc.

Step 4: Clone the MAC address.

After completing these steps, keep restarting the router. After logging in to the router, check whether the WAN has obtained the IP address in the running status and how to obtain it. This means that the connection is successful. Other computers can log in from behind the router. Just wire the port.

If you want to know more related questions, please check: FAQ

The above is the detailed content of How to connect two TVs with one network cable. For more information, please follow other related articles on the PHP Chinese website!

Statement:
The content of this article is voluntarily contributed by netizens, and the copyright belongs to the original author. This site does not assume corresponding legal responsibility. If you find any content suspected of plagiarism or infringement, please contact admin@php.cn