Many offices are now networked. Naturally, the Internet is very important in daily work, and now wireless networks have become an essential element of modern mobile office. However, the role that a single wireless AP can play is limited. Therefore, some companies with relatively large office areas often deploy multiple wireless APs in office buildings, so as to achieve seamless signal coverage and enable mobile work anytime and anywhere. But problems arise when there are too many wireless APs. Faced with dozens, hundreds or even thousands of devices, how should you set up wireless APs?
Related recommendations: "php Getting Started Tutorial"
In fact, if it is managed like a traditional router, then each wireless AP needs to be set up independently, so that The workload is undoubtedly huge. The method adopted for enterprise-level wireless networking is that small-scale wireless networking adopts the fat AP mode and is directly connected to the computer for configuration; in large-scale networking, wireless APs are used with wireless controllers, and unified settings and management are performed through the controller, which not only reduces workload, It also meets the needs of unified networking.
Wireless AP setting method
First, confirm the working mode of the wireless AP. If it is fat AP mode, the wireless AP setting method is similar to that of a wireless router. Directly connect the laptop's wired network card to the Ethernet port of the wireless AP, and then access the management address through the computer to configure the wireless AP parameters. The specific steps are to set the computer's IP address to automatically obtain it, open the browser and enter the management address of the wireless AP, enter the router management page, set parameters, turn on the wireless function, and check the security settings options.
If the wireless AP is in FIT working mode, it cannot be directly connected to the computer for configuration. You need to configure the parameters through the wireless AP management device (i.e. wireless AC). The configuration steps depend on the wireless AC of each manufacturer. In management mode, after connecting the management port of the wireless AC to the management interface, there are usually command line and web interface management. Command line configuration is more common among traditional wireless manufacturers, which requires memorizing command statements for various functional configurations. Generally, non-professional IT basically relies on manuals to complete wireless AP settings, and various problems may even occur. In comparison, the web-based interface configuration provided by Sundray Technology is much simpler and more intuitive. Not only do you not need to remember various complex commands, you only need to do some simple operations.
What needs to be noted is that a wireless network should be established by using multiple wireless APs and a wireless AC. It is best for the wireless AC and wireless AP to be products of the same brand manufacturer, so that the wireless setting method can be as described above. What is said is that the controller is uniformly configured. As for why the same brand is needed, the reason is very simple. Equipment from different manufacturers are basically incompatible with management. And in fact, from the user's perspective, using the same brand is more conducive to providing technical support and services in the future, and can also obtain better online physical fitness.
The above is the detailed content of Sundray wireless ap setting tutorial. For more information, please follow other related articles on the PHP Chinese website!